收藏切换
Effects of process technologies on microstructures and mechanical properties of medium Si 12%Cr reduced activation ferrite/martensite steel cladding tubes
收藏切换
Rui LI1, Sen GE1, Ben NIU1, Qianfu PAN2, Chaohong LIU2, Qing WANG1
Journal of Materials Engineering | 2026, 54(9) : 216 - 225
Less
收藏切换
Journal of Materials Engineering | 2026, 54(9): 216-225
• RESEARCH ARTICLE •
Effects of process technologies on microstructures and mechanical properties of medium Si 12%Cr reduced activation ferrite/martensite steel cladding tubes
Full
Rui LI1, Sen GE1, Ben NIU1, Qianfu PAN2, Chaohong LIU2, Qing WANG1
Affiliations
  • 1.Engineering Research Center for High Entropy Alloy Materials (Liaoning Province),School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,Liaoning,China
  • 2.Key Laboratory for Reactor Fuel and Materials,Nuclear Power Institute of China,Chengdu 610213,China
Published: 2026-09-20 doi: 10.11868/j.issn.1001-4381.2024.000438
Outline
收藏切换

The effects of two different deformation processes(process 1 and process 2) on the micro-structure and mechanical properties of reduced activation ferrite/martensite (RAFM) steel (Fe-0.21C-11.76Cr-1.41W-0.20V-0.17Ta-0.63Si-0.51Mn-0.015N, mass fraction/%) tubes are studied. The results show that when the rolling deformation of process 1 gradually increases from 44% to 66%, the tubes’ martensitic matrix transforms into fine ferritic matrix, the yield strength(σy) increases from 302 MPa to 407 MPa, the elongation(El) decreases from 28.6% to 25.8%, and the tensile strength(σU) remains basically unchanged. The matrix microstructure of process 2 (deformation amount 53%-57%) tubes also undergoes the transformation from martensite to ferrite, but due to the relatively small deformation amount, complete recrystallization is delayed, and σy decreases from 487 MPa to 364 MPa, and El increases from 23.9% to 36.3%. The tubes of two processes are subjected to the same forward and tempering treatments after final rolling with 44% and 66% deformation respectively. The microstructure of the finished tubes shows that carbide particles are evenly distributed on the matrix of lath martensite, and their mechanical properties at room temperature are equivalent(σy=590-597 MPa,σU=810-817 MPa,El=20.7%-22.8%). However, the high-temperature mechanical properties of the finished tubes of process 2 (σy=357 MPa,σU=380 MPa,El=16.3%) are slightly lower than that of process 1 (σy=383 MPa,σU=446 MPa,El=21.6%).

reduced activation ferritic/martensite steel  /  extrusion-cold rolling-annealing  /  deformation  /  mechanical property  /  strengthening mechanism
李睿, 葛森, 牛犇, 潘钱付, 刘超红, 王清. 加工工艺对中Si 12%Cr低活化铁素体/马氏体钢包壳管材微观组织与力学性能的影响. 材料工程, 2026 , 54 (9) : 216 -225 . DOI: 10.11868/j.issn.1001-4381.2024.000438
Rui LI, Sen GE, Ben NIU, Qianfu PAN, Chaohong LIU, Qing WANG. Effects of process technologies on microstructures and mechanical properties of medium Si 12%Cr reduced activation ferrite/martensite steel cladding tubes[J]. Journal of Materials Engineering, 2026 , 54 (9) : 216 -225 . DOI: 10.11868/j.issn.1001-4381.2024.000438
Year 2026 volume 54 Issue 9
80
36
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000438
  • Receive Date:2024-06-18
  • Online Date:2026-10-28
  • Published:2026-09-20
Article Data
Affiliations
History
  • Received:2024-06-18
  • Accepted:2024-09-05
Funding
Affiliations
    1.Engineering Research Center for High Entropy Alloy Materials (Liaoning Province),School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,Liaoning,China
    2.Key Laboratory for Reactor Fuel and Materials,Nuclear Power Institute of China,Chengdu 610213,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000438
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT