收藏切换
Preparation and anticorrosive properties of waterborne epoxy composite coating with stearic acid/chitosan modified multi-wall carbon nanotubes
收藏切换
Qingling TONG, Bao CUI, Jianjun YANG, Qingyun WU, Mingyuan WU, Jian’an ZHANG, Jiuyi LIU
Journal of Materials Engineering | 2026, 54(9) : 183 - 191
Less
收藏切换
Journal of Materials Engineering | 2026, 54(9): 183-191
• RESEARCH ARTICLE •
Preparation and anticorrosive properties of waterborne epoxy composite coating with stearic acid/chitosan modified multi-wall carbon nanotubes
Full
Qingling TONG, Bao CUI, Jianjun YANG, Qingyun WU, Mingyuan WU, Jian’an ZHANG, Jiuyi LIU
Affiliations
  • Anhui High Performance Engineering Laboratory of Water-based Polymer Materials,College of Chemistry and Chemical Engineering,Anhui University,Hefei 230601,China
Published: 2026-09-20 doi: 10.11868/j.issn.1001-4381.2024.000510
Outline
收藏切换

To improve the corrosion resistance of waterborne epoxy coating, chitosan is adsorbed onto the surface of multi-walled carbon nanotubes via surface-deposition crosslinking with glutaraldehyde as the crosslinking agent. Then, stearic acid has been grafted using a water-soluble coupling agent,1-ethyl-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC·HCl),to synthesize stearic acid/chitosan-modified multi-walled carbon nanotubes (SA/CS-CNTs). Aqueous epoxy anticorrosive coatings are prepared by blending SA/CS-CNTs with aqueous epoxy resin. The structure of SA/CS-CNTs has been characterized, and the corrosion resistance performances of the coatings have been explored. The results show that the epoxy resin with 0.5% (mass fraction)SA/CS-CNTs filler has the best corrosion resistance. Compared with the pure waterborne epoxy coating, its low-frequency impedance modulus is increased by about 5 orders of magnitude, the corrosion inhibition efficiency increases to 99.66%, and the water contact angle reaches 104.2°. The corrosion potential increases by 0.39 V,and the corrosion current density decreases from 4.17×10-6 A·cm-2 to 1.44×10-8 A·cm-2. After being immersed in 3.5% NaCl solution for 96 h, its impedance modulus is still above 107 Ω·cm2.

multi-walled carbon nanotubes  /  chitosan  /  stearic acid  /  waterborne epoxy resin  /  metal corrosion protection
童庆玲, 崔豹, 杨建军, 吴庆云, 吴明元, 张建安, 刘久逸. 硬脂酸/壳聚糖修饰多壁碳纳米管制备水性环氧复合涂层及防腐性能. 材料工程, 2026 , 54 (9) : 183 -191 . DOI: 10.11868/j.issn.1001-4381.2024.000510
Qingling TONG, Bao CUI, Jianjun YANG, Qingyun WU, Mingyuan WU, Jian’an ZHANG, Jiuyi LIU. Preparation and anticorrosive properties of waterborne epoxy composite coating with stearic acid/chitosan modified multi-wall carbon nanotubes[J]. Journal of Materials Engineering, 2026 , 54 (9) : 183 -191 . DOI: 10.11868/j.issn.1001-4381.2024.000510
Year 2026 volume 54 Issue 9
84
40
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000510
  • Receive Date:2024-07-16
  • Online Date:2026-10-28
  • Published:2026-09-20
Article Data
Affiliations
History
  • Received:2024-07-16
  • Accepted:2024-08-23
Funding
Affiliations
    Anhui High Performance Engineering Laboratory of Water-based Polymer Materials,College of Chemistry and Chemical Engineering,Anhui University,Hefei 230601,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000510
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT