收藏切换
Preparation and properties of epoxy modified cyanate ester resin for solvent free winding
收藏切换
Zhuojun YAO1, 2, Tao ZHOU1, 2, Haoyang ZHANG1, 2, Jingbin DAI1, 2, Wenyu HUANG1, 2, Xiaolei WANG1, 2
Journal of Materials Engineering | 2026, 54(2) : 294 - 301
Less
收藏切换
Journal of Materials Engineering | 2026, 54(2): 294-301
• RESEARCH ARTICLE •
Preparation and properties of epoxy modified cyanate ester resin for solvent free winding
Full
Zhuojun YAO1, 2, Tao ZHOU1, 2, Haoyang ZHANG1, 2, Jingbin DAI1, 2, Wenyu HUANG1, 2, Xiaolei WANG1, 2
Affiliations
  • 1.Shanghai Composites Science & Technology Co. ,Ltd. ,Shanghai 201112,China
  • 2.Shanghai Engineering Research Center of Aerospace Resin Based Composite,Shanghai 201112,China
Published: 2026-02-20 doi: 10.11868/j.issn.1001-4381.2024.000827
Outline
收藏切换

A solvent-free epoxy modified cyanate ester resin for winding is prepared by modifying bisphenol E cyanate ester/bisphenol A cyanate ester/acetylacetone copper blend with resorcinol diglycidyl ether (RDGE). The influence of RDGE content on the processability of the resin and the mechanical,thermomechanical,dielectric,and moisture absorption properties of cured resin is investigated. The results show that the viscosity of the resin at is 430 mPa·s @ 25 ℃,which is suitable for solvent-free winding. The processing window lasts for up to one month. RDGE has a catalytic effect on the curing reaction of cyanate esters. The curing temperature of the modified resin is 180 ℃,and the post-treatment temperature is 240 ℃. The oxazolidinone ring generated by the reaction between RDGE and cyanate ester enhances the toughness of the cured resin,while reducing BECy by an equal amount to maintain the processability of the winding process partially offsets the toughening effect. The mechanical properties of the resin cured material reach their maximum at an RDGE content of 20%,with tensile strength and modulus of 78.45 MPa and 3.50 GPa,elongation at break of 2.77%,and bending strength and modulus of 152.49 MPa and 3.48 GPa,respectively. At this point, the moisture resistance of cured resin has improved,with a water absorption rate of 1.60% after 100 h of boiling at 100 ℃.However,the glass transition temperature and dielectric properties have decreased, with a Tg of 247 ℃. The dielectric constant in the frequency range of 7-15 GHz is 3.04-3.05,and the dielectric dissipation factor is 0.013-0.014.

epoxy modified cyanate ester resin  /  solvent free  /  winding  /  mechanical property
姚卓君, 周涛, 张浩洋, 戴晶滨, 黄文煜, 王晓蕾. 无溶剂缠绕环氧改性氰酸酯树脂的制备与性能. 材料工程, 2026 , 54 (2) : 294 -301 . DOI: 10.11868/j.issn.1001-4381.2024.000827
Zhuojun YAO, Tao ZHOU, Haoyang ZHANG, Jingbin DAI, Wenyu HUANG, Xiaolei WANG. Preparation and properties of epoxy modified cyanate ester resin for solvent free winding[J]. Journal of Materials Engineering, 2026 , 54 (2) : 294 -301 . DOI: 10.11868/j.issn.1001-4381.2024.000827
Year 2026 volume 54 Issue 2
49
23
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000827
  • Receive Date:2024-12-10
  • Online Date:2026-10-27
  • Published:2026-02-20
Article Data
Affiliations
History
  • Received:2024-12-10
  • Accepted:2025-01-24
Funding
Affiliations
    1.Shanghai Composites Science & Technology Co. ,Ltd. ,Shanghai 201112,China
    2.Shanghai Engineering Research Center of Aerospace Resin Based Composite,Shanghai 201112,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000827
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT