收藏切换
Corrosion and wear resistance of tin bronze and five commonly used iron-carbon alloys in simulated seawater
收藏切换
Wang DIAO1, Yifei WANG1, Shuaiheng XIAO1, Rong ZENG1, Qifa ZHANG1, Lijing YANG2, Wenhui WEN1, Leyang DAI1, Jun CHENG3, Buhui ZENG1, Junwei WANG1
Journal of Materials Engineering | 2026, 54(3) : 201 - 212
Less
收藏切换
Journal of Materials Engineering | 2026, 54(3): 201-212
• RESEARCH ARTICLE •
Corrosion and wear resistance of tin bronze and five commonly used iron-carbon alloys in simulated seawater
Full
Wang DIAO1, Yifei WANG1, Shuaiheng XIAO1, Rong ZENG1, Qifa ZHANG1, Lijing YANG2, Wenhui WEN1, Leyang DAI1, Jun CHENG3, Buhui ZENG1, Junwei WANG1
Affiliations
  • 1.Key Laboratory of Marine and Offshore Engineering of Fujian Province,School of Marine Engineering,Jimei University,Xiamen 361021,Fujian,China
  • 2.Xi’an Saflex Material Protection Limited Liability Company,Xi’an 710200,China
  • 3.School of Marine Equipment and Mechanical Engineering,Jimei University,Xiamen 361021,Fujian,China
Published: 2026-03-20 doi: 10.11868/j.issn.1001-4381.2025.000271
Outline
收藏切换

The ship's anchor chain rings, sliding bearings, and other components exposed to seawater are subjected to long-term corrosion and wear, collectively referred to as tribocorrosion. The tricoborrosion resistance of these materials directly affects the operational safety of marine equipment. In this study, the in-situ electrochemical testing method for corrosion and wear are employed to investigate the tribocorrosion resistance of six commonly used materials in artificial seawater environments: anchor chain steel (CM690), bearing steel (GCr15), high-strength marine steel (AH36 steel), cast iron for diesel engine cylinder liners (HT350), tin bronze for plain bearing bushings (QSn8), and steel most commonly used in mechanical structures (45 steel). The objective is to analyze their corrosion resistance and damage resistance mechanisms. The results show that under pure corrosion conditions, QSn8 exhibits a significantly higher self-corrosion potential compared to other iron-carbon alloys, and has the lowest corrosion rate (0.09 mm/a). However, under corrosion wear conditions, HT350 demonstrates a relatively low wear loss rate (6.28×10-6 mm³/(N·m)), second only to QSn8 (3.47×10-6 mm³/(N·m)). This is attributed to its high hardness and the lubricating effect of graphite flakes within the cast iron matrix. The other four materials exhibits higher wear rates,around (1.22-1.88)×10-5 mm³/(N·m). QSn8 shows excellent resistance to both corrosion and wear in simulated seawater conditions, making it a promising candidate for tribocorrosion-resistant components. However, its relatively high cost may limit its widespread application. If other mechanical performance requirements are met, HT350 can serve as a cost-effective alternative.

corrosion and wear  /  tin bronze  /  iron and carbon alloy  /  seawater corrosion
刁望, 王艺霏, 肖帅恒, 曾嵘, 张启发, 杨理京, 温文辉, 戴乐阳, 程俊, 曾步辉, 王军伟. 锡青铜及5种常用铁碳合金在模拟海水中的耐腐蚀磨损性能. 材料工程, 2026 , 54 (3) : 201 -212 . DOI: 10.11868/j.issn.1001-4381.2025.000271
Wang DIAO, Yifei WANG, Shuaiheng XIAO, Rong ZENG, Qifa ZHANG, Lijing YANG, Wenhui WEN, Leyang DAI, Jun CHENG, Buhui ZENG, Junwei WANG. Corrosion and wear resistance of tin bronze and five commonly used iron-carbon alloys in simulated seawater[J]. Journal of Materials Engineering, 2026 , 54 (3) : 201 -212 . DOI: 10.11868/j.issn.1001-4381.2025.000271
Year 2026 volume 54 Issue 3
62
30
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2025.000271
  • Receive Date:2025-05-13
  • Online Date:2026-10-27
  • Published:2026-03-20
Article Data
Affiliations
History
  • Received:2025-05-13
  • Accepted:2025-06-09
Funding
Affiliations
    1.Key Laboratory of Marine and Offshore Engineering of Fujian Province,School of Marine Engineering,Jimei University,Xiamen 361021,Fujian,China
    2.Xi’an Saflex Material Protection Limited Liability Company,Xi’an 710200,China
    3.School of Marine Equipment and Mechanical Engineering,Jimei University,Xiamen 361021,Fujian,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2025.000271
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT