收藏切换
Analysis of residual stress in threaded regions of SiC fiber-reinforced Ti3Al composite
收藏切换
Jinpeng WANG1, Jinlei QI1, Ning WANG1, Mingqin GAO1, Longpeng WANG1, Minjuan WANG2, Hao HUANG2, Kenan LI3, Mao WEN1
Journal of Materials Engineering | 2026, 54(4) : 47 - 54
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 47-54
• FRONTIERS OF TITANIUM-BASED MATERIALS COLUMN •
Analysis of residual stress in threaded regions of SiC fiber-reinforced Ti3Al composite
Full
Jinpeng WANG1, Jinlei QI1, Ning WANG1, Mingqin GAO1, Longpeng WANG1, Minjuan WANG2, Hao HUANG2, Kenan LI3, Mao WEN1
Affiliations
  • 1.School of Materials Science and Engineering,Jilin University,Changchun 130012,China
  • 2.Aviation Key Laboratory of Science and Technology on Advanced Titanium Alloys,AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
  • 3.State Key Laboratory of High Performance Tools,Zhengzhou Abrasive Grinding Research Institute Co. ,Ltd. ,Zhengzhou 450001,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2025.000485
Outline
收藏切换

Continuous SiC fiber-reinforced Ti3Al(SiCf/Ti3Al) composite combines the advantages of high damage tolerance and ease of forming for Ti3Al matrix and high-strength for SiC fibers. It is an ideal candidate material for lightweight, high-strength, and high-temperature resistant fasteners in the aerospace field. However,complex residual stresses are inevitably introduced during the thread machining process of SiCf/Ti3Al composites. Therefore,analyzing the residual stresses in the threaded regions of SiCf/Ti3Al composites is of great significance for enhancing the service safety and reliability of fasteners. Given the complex geometric structures of the threaded regions in turned SiCf/Ti3Al composites and the close relationship between their stress distribution and core diameter, the characterization and analysis of stress are challenged by the intricate thread profile and limited dimensions. Residual stress measurements and analyses are conducted on the thread crest and radial cross-sections of the threads using side-inclined X-ray diffraction and nanoindentation method,respectively. The results show that the thread crest is in a state of compressive stress after turning. When the core diameter increases from 3.0 mm to 4.0 mm,the compressive stress increases from 387.6 MPa to 540.6 MPa. The radial cross-sections of the thread are also under compressive stress. As the core diameter increases from 3.0 mm to 4.0 mm,the compressive stress at the same location 100 μm from the thread crest increases from 326.9 MPa to 430.8 MPa. Furthermore, the compressive stress decreases with increasing distance from the thread crest.

SiCf/Ti3Al composite  /  fastener thread  /  XRD method  /  nanoindentation method  /  residual stress
王金鹏, 齐金磊, 王宁, 高明钦, 王龙鹏, 王敏涓, 黄浩, 黎克楠, 文懋. SiC纤维增强Ti3Al复合材料螺纹区域残余应力分析. 材料工程, 2026 , 54 (4) : 47 -54 . DOI: 10.11868/j.issn.1001-4381.2025.000485
Jinpeng WANG, Jinlei QI, Ning WANG, Mingqin GAO, Longpeng WANG, Minjuan WANG, Hao HUANG, Kenan LI, Mao WEN. Analysis of residual stress in threaded regions of SiC fiber-reinforced Ti3Al composite[J]. Journal of Materials Engineering, 2026 , 54 (4) : 47 -54 . DOI: 10.11868/j.issn.1001-4381.2025.000485
Year 2026 volume 54 Issue 4
60
28
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2025.000485
  • Receive Date:2025-08-27
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2025-08-27
  • Accepted:2025-09-21
Funding
Affiliations
    1.School of Materials Science and Engineering,Jilin University,Changchun 130012,China
    2.Aviation Key Laboratory of Science and Technology on Advanced Titanium Alloys,AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
    3.State Key Laboratory of High Performance Tools,Zhengzhou Abrasive Grinding Research Institute Co. ,Ltd. ,Zhengzhou 450001,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2025.000485
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT