收藏切换
Research on interfacial properties of Csf/SiC composites formed by laser additive manufacturing/silicon infiltration
收藏切换
Ce SUN1, Peng CHEN1, Jinhao QIAN1, Xiali GAO1, Haiyang TIAN1, Chenqian YANG1, Rong TU2, Song ZHANG2, Meijun YANG3, Xiao HAN4, Lixia YANG5, Yusheng SHI6, Kai LIU1
Journal of Materials Engineering | 2026, 54(2) : 101 - 112
Less
收藏切换
Journal of Materials Engineering | 2026, 54(2): 101-112
• CERAMIC ADDITIVE MANUFACTURING AND ITS APPLICATIONS •
Research on interfacial properties of Csf/SiC composites formed by laser additive manufacturing/silicon infiltration
Full
Ce SUN1, Peng CHEN1, Jinhao QIAN1, Xiali GAO1, Haiyang TIAN1, Chenqian YANG1, Rong TU2, Song ZHANG2, Meijun YANG3, Xiao HAN4, Lixia YANG5, Yusheng SHI6, Kai LIU1
Affiliations
  • 1.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China
  • 2.State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology,Wuhan 430070,China
  • 3.The Center for Materials Research and Analysis,Wuhan University of Technology,Wuhan 430070,China
  • 4.Beijing Institute of Space Mechanics & Electricity,Beijing 100094,China
  • 5.School of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210000,China
  • 6.State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China
Published: 2026-02-20 doi: 10.11868/j.issn.1001-4381.2025.000320
Outline
收藏切换

Aiming at the problem that the internal short carbon fiber (Csf) of carbon fiber reinforced silicon carbide (Csf/SiC) composites prepared by laser powder bed molten/liquid silicon permeation (LPBF/LSI) is prone to be eroded by molten Si, which limits the strengthening and toughening effect of fibers on the matrix and restricts the performance improvement of Csf/SiC composites formed by LPBF/LSI. This study propose to coat pyrolytic carbon (PyC) and silicon carbide (SiC) coatings respectively on the surface of Csf by hydrothermal carbonization and dip coating-pyrolysis processes, and Csf/SiC composites are prepared through LPBF/LSI. The influence of the fiber surface coating on the microstructure and mechanical properties of Csf/SiC composites is studied. The results show that the SiC coating can prevent the direct contact between Csf and molten Si, avoid the dissolution-precipitation reaction at the interface between the two, and thereby protect Csf. Compared with the Csf/SiC composites with Csf and Csf@PyC, the internal fibers of the Csf/SiC composites with Csf@SiC still retained better original structure, while the Csf inside the former two showed reactive erosion. The fibers retained due to SiC coating protection improved the flexural strength and fracture toughness of Csf/SiC composites to a certain extent through crack deflection, coating de-bonding and fiber pulling mechanisms, which are 7.1% and 8.3% higher than those of Csf/SiC composites with Csf and Csf@PyC, respectively. The maximum reaches 246.09 MPa and 3.28 MPa·m1/2. In this study, the synergistic improvement of the strength and toughness of Csf/SiC composites is achieved through the optimization of fiber surface coatings, providing a certain theoretical basis for the preparation of high-performance Csf/SiC composites by LPBF/LSI.

3D printing  /  laser powder bed fusion  /  liquid silicon infiltration  /  Csf/SiC composite  /  coating
孙策, 陈鹏, 钱锦豪, 高夏莉, 田海洋, 杨辰倩, 涂溶, 章嵩, 杨梅君, 韩潇, 杨丽霞, 史玉升, 刘凯. 激光增材/渗硅复合成形Csf/SiC复合材料的界面性能研究. 材料工程, 2026 , 54 (2) : 101 -112 . DOI: 10.11868/j.issn.1001-4381.2025.000320
Ce SUN, Peng CHEN, Jinhao QIAN, Xiali GAO, Haiyang TIAN, Chenqian YANG, Rong TU, Song ZHANG, Meijun YANG, Xiao HAN, Lixia YANG, Yusheng SHI, Kai LIU. Research on interfacial properties of Csf/SiC composites formed by laser additive manufacturing/silicon infiltration[J]. Journal of Materials Engineering, 2026 , 54 (2) : 101 -112 . DOI: 10.11868/j.issn.1001-4381.2025.000320
Year 2026 volume 54 Issue 2
57
28
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2025.000320
  • Receive Date:2025-06-03
  • Online Date:2026-10-27
  • Published:2026-02-20
Article Data
Affiliations
History
  • Received:2025-06-03
  • Accepted:2025-07-10
Funding
Affiliations
    1.School of Materials Science and Engineering,Wuhan University of Technology,Wuhan 430070,China
    2.State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology,Wuhan 430070,China
    3.The Center for Materials Research and Analysis,Wuhan University of Technology,Wuhan 430070,China
    4.Beijing Institute of Space Mechanics & Electricity,Beijing 100094,China
    5.School of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210000,China
    6.State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2025.000320
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT