收藏切换
Microstructure and tensile properties of Al-12Zn-2Mg-0.5Cu-0.3Sc ultra-high strength aluminum alloy
收藏切换
Yanjing WANG, Huanchen MA, Zaidong XU, Zhisheng NONG, Chenhang YUAN, Wendong ZHANG
Journal of Materials Engineering | 2025, 53(12) : 220 - 229
Less
收藏切换
Journal of Materials Engineering | 2025, 53(12): 220-229
• RESEARCH ARTICLE •
Microstructure and tensile properties of Al-12Zn-2Mg-0.5Cu-0.3Sc ultra-high strength aluminum alloy
Full
Yanjing WANG, Huanchen MA, Zaidong XU, Zhisheng NONG, Chenhang YUAN, Wendong ZHANG
Affiliations
  • School of Materials Science and Engineering,Shenyang Aerospace University,Shenyang 110136,China
Published: 2025-12-20 doi: 10.11868/j.issn.1001-4381.2022.000871
Outline
收藏切换

According to the maximum solid solubility of Zn, Mg, Cu in aluminum and their precipitation strengthening phases, Al-12Zn-2Mg-0.5Cu-0.3Sc high strength aluminum alloy is designed. The billet of this alloy is hot rolled followed by clod rolling and heat treatment to explore the optimal heat treatment process for aluminum alloy with high solid solubility to obtain good tensile properties. Optical microscopy (OM), X-ray diffractometry (XRD) , and scanning electron microscopy (SEM) are used to observe and analyze the microstructure of the alloy under different heat treatment conditions, and universal tensile testing machine is used to test the tensile properties of the alloy at room temperature. The results show that after solution treatment of 470 ℃/1 h, the microstructure of the cold-rolled alloy is incomplete recrystallized with elongated grains along the rolling direction. The ultimate tensile strength of the alloy is 599 MPa, and the elongation reaches 15.4%. After aging treatment of 120 ℃/30 h, fine η (MgZn2) and T(AlZnMgCu) strengthened phases precipitate in the microstructure, which further improve the properties of the alloy. The corresponding tensile strength reaches 736 MPa, and the elongation is 10.6%.

high Zn content  /  ultra-high strength aluminum alloy  /  rolling process  /  aging treatment  /  tensile property
王艳晶, 马寰宸, 徐再东, 农智升, 袁晨航, 张文东. Al-12Zn-2Mg-0.5Cu-0.3Sc超高强度铝合金的组织和拉伸性能. 材料工程, 2025 , 53 (12) : 220 -229 . DOI: 10.11868/j.issn.1001-4381.2022.000871
Yanjing WANG, Huanchen MA, Zaidong XU, Zhisheng NONG, Chenhang YUAN, Wendong ZHANG. Microstructure and tensile properties of Al-12Zn-2Mg-0.5Cu-0.3Sc ultra-high strength aluminum alloy[J]. Journal of Materials Engineering, 2025 , 53 (12) : 220 -229 . DOI: 10.11868/j.issn.1001-4381.2022.000871
Year 2025 volume 53 Issue 12
58
27
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2022.000871
  • Receive Date:2022-10-19
  • Online Date:2026-10-26
  • Published:2025-12-20
Article Data
Affiliations
History
  • Received:2022-10-19
  • Accepted:2023-03-10
Funding
Affiliations
    School of Materials Science and Engineering,Shenyang Aerospace University,Shenyang 110136,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2022.000871
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT