收藏切换
In situ observation of high temperature tensile creep damage and fracture mechanism of 2D C/SiC composites
收藏切换
Junwei LAN1, Yongjin WEI1, Yuxi YU1, Liuying HUANG1, Zhong LUO2, Dahai YE3, Zhongyi FU3
Journal of Materials Engineering | 2026, 54(1) : 218 - 227
Less
收藏切换
Journal of Materials Engineering | 2026, 54(1): 218-227
• RESEARCH ARTICLE •
In situ observation of high temperature tensile creep damage and fracture mechanism of 2D C/SiC composites
Full
Junwei LAN1, Yongjin WEI1, Yuxi YU1, Liuying HUANG1, Zhong LUO2, Dahai YE3, Zhongyi FU3
Affiliations
  • 1.Fujian Key Laboratory of Advanced Materials,Department of Materials Science and Engineering,College of Materials,Xiamen University,Xiamen 361005,Fujian,China
  • 2.Department of Naval Architecture & Ocean Engineering,Naval University of Engineering,Wuhan 430033,China
  • 3.AECC Hunan Aviation Powerplant Research Institute,Zhuzhou 412002,Hunan,China
Published: 2026-01-20 doi: 10.11868/j.issn.1001-4381.2024.000357
Outline
收藏切换

The fracture morphology of the specimens is observed using a scanning electron microscope, and the failure modes of the 2D C/SiC composites under the action of tensile creep and fracture are investigated and analyzed. The crack extension process of the 2D C/SiC composites under the action of tensile creep is observed using the home-built high-temperature tensile creep tester and the in-situ crack extension observation system. The fracture process and failure mode of 2D C/SiC composites under tensile creep are investigated and studied. The experimental results show that the creep rupture time of 2D C/SiC composite without notch is greater than 8000 s at 1000 ℃/50 MPa, the steady state creep rate is 5.11×10-8-1.36×10-7 s-1. The existence of the notch shortens the steady state creep stage significantly, and the creep time is shortened by about 2000 s, and the steady state creep rate increases to 2.0 × 10-7 s-1. The two stages of decelerated creep and steady state creep are the key features of the tensile creep curves of 2D C/SiC composites at 1000 ℃/50 MPa. Crack expansion is mainly concentrated in the late stage of steady state creep phase, where the carbon fiber will rapidly undergo oxidation reaction in the high temperature environment and micro-cracks sprout in the matrix. When the specimen internal micro-crack saturation will produce macro-cracks, macro-cracks connected to the internal pores of the material to form a coherent expansion path, resulting in the rapid expansion of cracks, crack expansion caused by fiber blocking led to cracks occur many times the deflection of the creep specimen macroscopic fracture is jagged, and there are a large number of fibers pulled out.

C/SiC composites  /  high temperature tensile creep  /  crack extension  /  in-situ observation  /  creep oxidation mechanism
兰俊伟, 魏永金, 余煜玺, 黄柳英, 罗忠, 叶大海, 付仲议. 2D C/SiC复合材料高温拉伸蠕变损伤原位观察及断裂机理. 材料工程, 2026 , 54 (1) : 218 -227 . DOI: 10.11868/j.issn.1001-4381.2024.000357
Junwei LAN, Yongjin WEI, Yuxi YU, Liuying HUANG, Zhong LUO, Dahai YE, Zhongyi FU. In situ observation of high temperature tensile creep damage and fracture mechanism of 2D C/SiC composites[J]. Journal of Materials Engineering, 2026 , 54 (1) : 218 -227 . DOI: 10.11868/j.issn.1001-4381.2024.000357
Year 2026 volume 54 Issue 1
66
34
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000357
  • Receive Date:2024-05-16
  • Online Date:2026-10-26
  • Published:2026-01-20
Article Data
Affiliations
History
  • Received:2024-05-16
  • Accepted:2024-08-15
Funding
Affiliations
    1.Fujian Key Laboratory of Advanced Materials,Department of Materials Science and Engineering,College of Materials,Xiamen University,Xiamen 361005,Fujian,China
    2.Department of Naval Architecture & Ocean Engineering,Naval University of Engineering,Wuhan 430033,China
    3.AECC Hunan Aviation Powerplant Research Institute,Zhuzhou 412002,Hunan,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000357
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT