收藏切换
Effects of heat treatment technology on microstructures and properties of 30Cr15NiMo martensitic stainless steel
收藏切换
Haixu WANG, Zhaobing GAO, Ruifeng LIN, Lijun WANG
Journal of Materials Engineering | 2026, 54(1) : 211 - 217
Less
收藏切换
Journal of Materials Engineering | 2026, 54(1): 211-217
• RESEARCH ARTICLE •
Effects of heat treatment technology on microstructures and properties of 30Cr15NiMo martensitic stainless steel
Full
Haixu WANG, Zhaobing GAO, Ruifeng LIN, Lijun WANG
Affiliations
  • Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education),Northeastern University,Shenyang 110819,China
Published: 2026-01-20 doi: 10.11868/j.issn.1001-4381.2024.000815
Outline
收藏切换

As an effective approach for improving the match of strength and ductility of martensitic stainless steel, the processing of quenching and partitioning (Q&P) is seldom implemented in industrial practice of commercial steels due to two factors: the one is difficulty in accurate controlling the quenching suspending temperature, and another is large amount of carbide precipitation within martensite during partitioning. In this work, an experimental medium-carbon martensitic stainless steel of 30Cr15NiMo is designed and fabricated. The effects of processing parameters on microstructures revolution are investigated, and the mechanism of strengthening and toughening is clarified as well, through microstructure characterization and mechanical property testing conduct on Q&P treated samples. The research results show that, the martensitic start (Ms) temperature of the testing steel is approximately 200 ℃ after complete austenitization, and a compound microstructure of martensite and retained austenite can be obtained after the sample being cooled to ambient temperature. The excellent comprehensive mechanical properties of 1255 MPa in yield strength, 1631 MPa in tensile strength, 18.5% in elongation and 42% in area reduction can be achieved in the hot rolled testing steel plate subjected to tempering-assisted partitioning treatment at 480 ℃. The microstructure characterization confirms the volume fraction of retained austenite is approximately 20.2%, and small amount of cementite precipitated inside martensite, these factors improve the uniform elongation and non-uniform elongation synergistically. The research results provide fundamental basis for further optimizing in chemistry and processing.

martensitic stainless steel  /  quenching and partitioning  /  strength and ductility  /  retained austenite  /  carbide
王海旭, 高兆兵, 林瑞丰, 王立军. 热处理工艺对30Cr15NiMo马氏体不锈钢组织与性能的影响. 材料工程, 2026 , 54 (1) : 211 -217 . DOI: 10.11868/j.issn.1001-4381.2024.000815
Haixu WANG, Zhaobing GAO, Ruifeng LIN, Lijun WANG. Effects of heat treatment technology on microstructures and properties of 30Cr15NiMo martensitic stainless steel[J]. Journal of Materials Engineering, 2026 , 54 (1) : 211 -217 . DOI: 10.11868/j.issn.1001-4381.2024.000815
Year 2026 volume 54 Issue 1
55
26
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000815
  • Receive Date:2024-12-10
  • Online Date:2026-10-26
  • Published:2026-01-20
Article Data
Affiliations
History
  • Received:2024-12-10
  • Accepted:2025-01-24
Funding
Affiliations
    Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education),Northeastern University,Shenyang 110819,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000815
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT