收藏切换
Large section C700R-1 alloy forging for advanced ultra-supercritical turbine rotor and mechanical properties
收藏切换
PDF
Yaguan BAI1, 2, 3, Yihong NIE1, 2, 3, Xin ZHANG1, Jinfeng KOU1, Wei GUO1, Hongmei LI1, Bingbing ZHANG1, Zhiyuan CAO1, Baozhong WANG2
Journal of Materials Engineering | 2025, 53(11) : 72 - 79
Less
收藏切换
Journal of Materials Engineering | 2025, 53(11): 72-79
RESEARCH ARTICLE
Large section C700R-1 alloy forging for advanced ultra-supercritical turbine rotor and mechanical properties
Full
Yaguan BAI1, 2, 3, Yihong NIE1, 2, 3, Xin ZHANG1, Jinfeng KOU1, Wei GUO1, Hongmei LI1, Bingbing ZHANG1, Zhiyuan CAO1, Baozhong WANG2
Affiliations
  • 1.Tianjin Heavy Industries Research & Development Co. ,Ltd. ,Tianjin 300457,China
  • 2.China First Heavy Industries,Qiqihar 161042,Heilongjiang,China
  • 3.Heilongjiang Provincial Key Laboratory of Intelligent Manufacturing for Advanced Nuclear Power Equipment,Qiqihar 161042,Heilongjiang,China
Published: 2025-11-20 doi: 10.11868/j.issn.1001-4381.2023.000310
Outline
收藏切换

To address the evolving demands for the clean and efficient utilization of coal, efforts have been devoted to the research and development of C700R-1 nickel-based alloy rotor forgings for advanced ultra-supercritical steam turbine rotors. Concurrently, tests are conducted on the conventional mechanical properties and creep rupture properties of the trial-manufactured rotor forgings. The results show that the use of the closed upsetting+extrusion method enables the high-homogeneity forging of Φ850 mm forgings. The as-forged grain size of the developed large-section forgings ranges from grade 4 to grade 7, and the grain size after heat treatment is approximately grade 3. Due to the rapid cooling rate of the edge parts after solid solution, a large number of uniform and fine γ' phases precipitate in the subsequent aging process. Therefore, the tensile properties of edge position are slightly better than those of the heart and 1/2R position. The variation of tensile properties in different directions of edge position is small. The room temperature tensile strength can reach 950 MPa, the yield strength can reach 600 MPa, and the V-notch absorbed energy at room temperature is beyond 70 J at different positions after heat treatment. The tensile strength can reach 750 MPa, yield strength can reach 500 MPa at 700 ℃. The plasticity is higher than 25% at room temperature and 700 ℃. The creep life exceeds 7000 h in the condition of 700 ℃/300 MPa. Through the deformation mode of closed upsetting+extrusion and reasonable heat treatment process, the homogenization manufacturing of nickel base alloy forgings with a section grade of Φ850 mm, which provides key data for the subsequent manufacturing of full-size nickel base alloy rotor forgings.

advanced ultra-supercritical  /  rotor  /  C700R-1  /  nickel-based alloy  /  extrusion  /  mechanical property
Yaguan BAI, Yihong NIE, Xin ZHANG, Jinfeng KOU, Wei GUO, Hongmei LI, Bingbing ZHANG, Zhiyuan CAO, Baozhong WANG. Large section C700R-1 alloy forging for advanced ultra-supercritical turbine rotor and mechanical properties[J]. Journal of Materials Engineering, 2025 , 53 (11) : 72 -79 . DOI: 10.11868/j.issn.1001-4381.2023.000310
Year 2025 volume 53 Issue 11
PDF
194
96
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2023.000310
  • Receive Date:2023-04-25
  • Online Date:2026-01-21
  • Published:2025-11-20
Article Data
Affiliations
History
  • Received:2023-04-25
  • Accepted:2023-07-06
Funding
Affiliations
    1.Tianjin Heavy Industries Research & Development Co. ,Ltd. ,Tianjin 300457,China
    2.China First Heavy Industries,Qiqihar 161042,Heilongjiang,China
    3.Heilongjiang Provincial Key Laboratory of Intelligent Manufacturing for Advanced Nuclear Power Equipment,Qiqihar 161042,Heilongjiang,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2023.000310
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT