收藏切换
Micro-texture formation mechanism and mechanical behavior of composite lamellar microstructure in oxygen-enriched near-α titanium alloys
收藏切换
Hairui ZHANG1, 2, Hongzhi NIU3, Deliang ZHANG3, Keke ZHANG1, Guang CHEN1
Journal of Materials Engineering | 2026, 54(8) : 31 - 41
Less
收藏切换
Journal of Materials Engineering | 2026, 54(8): 31-41
Micro-texture formation mechanism and mechanical behavior of composite lamellar microstructure in oxygen-enriched near-α titanium alloys
Full
Hairui ZHANG1, 2, Hongzhi NIU3, Deliang ZHANG3, Keke ZHANG1, Guang CHEN1
Affiliations
  • 1.State Key Laboratory of Light Superalloys,Henan University of Science and Technology,Luoyang 471023,Henan,China
  • 2.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471023,Henan,China
  • 3.School of Materials Science and Engineering,Northeastern University,Shenyang 110819,China
Published: 2026-08-20 doi: 10.11868/j.issn.1001-4381.2026.000301
Outline
收藏切换

To address the strength-ductility trade-off dilemma of high-oxygen powder metallurgy (PM) titanium alloys, two types of near-α titanium alloys (880-PE1 and 880-PE2) with α/βt composite lamellar microstructure and oxygen mass fraction of 0.36% are fabricated via the combination of sintering and hot extrusion process. The crystal size and morphological characteristics are analyzed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The crystallographic orientation features are examined through X-ray diffraction (XRD) macro-texture and electron backscatter diffraction (EBSD) micro-texture analysis. The relationships between microstructure and mechanical properties and deformation mechanisms are studied by combining room-temperature tensile tests and dislocation bright-field imaging observations. The results show that the 880-PE1 specimen exhibits no obvious micro-texture. Cracks initiate at grain boundaries of α phases during plastic deformation, resulting in a low elongation to fracture of only 8.9%. The 880-PE2 specimen develops a micro-texture with the 〈0001〉 direction of α grains aligned parallel to the extrusion direction. This unique micro-texture can effectively activate pyramidal 〈c+a〉 dislocations, which move via wavy slip and give rise to an extraordinary increase in work-hardening rate. Additionally, lamellar distortion and grain-boundary deformation compatibility are effectively promoted, and the initiation of intergranular cracks is suppressed simultaneously. Ultimate tensile strength of the 880-PE2 specimen reaches 1070 MPa,and the elongation to fracture increases to 22.0%, achieving synergistic improvement of strength–ductility.

oxygen-enriched near-α titanium alloy  /  micro-texture  /  α/βt composite lamellar microstructure  /  mechanical property  /  work-hardening rate
张海瑞, 牛红志, 张德良, 张柯柯, 陈光. 富氧近α钛合金复合片层组织的微织构生成机制和力学行为. 材料工程, 2026 , 54 (8) : 31 -41 . DOI: 10.11868/j.issn.1001-4381.2026.000301
Hairui ZHANG, Hongzhi NIU, Deliang ZHANG, Keke ZHANG, Guang CHEN. Micro-texture formation mechanism and mechanical behavior of composite lamellar microstructure in oxygen-enriched near-α titanium alloys[J]. Journal of Materials Engineering, 2026 , 54 (8) : 31 -41 . DOI: 10.11868/j.issn.1001-4381.2026.000301
Year 2026 volume 54 Issue 8
85
42
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2026.000301
  • Receive Date:2026-05-17
  • Online Date:2026-10-28
  • Published:2026-08-20
Article Data
Affiliations
History
  • Received:2026-05-17
  • Accepted:2026-05-30
Funding
Affiliations
    1.State Key Laboratory of Light Superalloys,Henan University of Science and Technology,Luoyang 471023,Henan,China
    2.School of Materials Science and Engineering,Henan University of Science and Technology,Luoyang 471023,Henan,China
    3.School of Materials Science and Engineering,Northeastern University,Shenyang 110819,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2026.000301
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT