收藏切换
Effect of heat treatment on microstructure modulation and aging precipitation behavior of Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb alloy
收藏切换
Zhenzhong FAN1, 2, Ji WANG3, Hongbiao LI3, Shide LI3, Yanzhong TIAN4, Shoujie YANG1, 2
Journal of Materials Engineering | 2026, 54(4) : 237 - 249
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 237-249
• RESEARCH ARTICLE •
Effect of heat treatment on microstructure modulation and aging precipitation behavior of Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb alloy
Full
Zhenzhong FAN1, 2, Ji WANG3, Hongbiao LI3, Shide LI3, Yanzhong TIAN4, Shoujie YANG1, 2
Affiliations
  • 1.AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
  • 2.Beijing Engineering Research Center of Advanced Aluminum Alloys and Applications,Beijing 100095,China
  • 3.CITlC Dicastal Co. ,Ltd. ,Qinhuangdao 066000,Hebei,China
  • 4.School of Materials Science and Engineering,Northeastern University,Shenyang 110167,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2025.000360
Outline
收藏切换

The Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb alloy is prepared using the smelting process. This study investigates the impacts of solution and aging temperatures, as well as their durations, on the microstructure and mechanical properties of the alloy. Additionally, it analyzed the morphology, size, and distribution of Si and precipitated phases.It is observed that the as-cast microstructure comprises α-Al, eutectic Si, Mg₂Si, Al₃Sc, and Al₃(Sc, Zr) phases. As the solution and aging temperatures and times increase, the morphology of the Si phase transforms from plate-like and fibrous to worm-like and nearly spherical. Prolonged holding times lead to the segregation and coarsening of the Si phase, which turns into short rod-like structures. The tensile strength and elongation initially rise and then decline with increasing solution temperature. During single-stage aging at 170 °C, the strength and hardness first increase and then decrease with the extension of the holding time, eventually reaching a stable state. The interface between the β´´ and α-Al phases evolves from coherent to semi-coherent and then incoherent, and the fracture mechanism shifts from intergranular fracture to typical dimple fracture.Pre-aging at 110 ℃ promotes the precipitation of β´´ and Al₃(Sc, Zr) phases, significantly spheroidizes the morphology of the Si phase, and refines its size. The length and precipitated surface density of the β´´ phases are (29 ± 1.8) nm and 3.52 × 10³ μm⁻², respectively. After dual-stage aging at 110 °C/2 h + 170 °C/6 h, the tensile strength, yield strength, and elongation can reach 363, 301 MPa, and 7.9%, respectively.

Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb alloy  /  heat treatment  /  microstructure  /  aging strengthening  /  mechanical property
樊振中, 王佶, 李鸿标, 李世德, 田艳中, 杨守杰. 热处理对Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb合金显微组织调控与时效析出行为的影响. 材料工程, 2026 , 54 (4) : 237 -249 . DOI: 10.11868/j.issn.1001-4381.2025.000360
Zhenzhong FAN, Ji WANG, Hongbiao LI, Shide LI, Yanzhong TIAN, Shoujie YANG. Effect of heat treatment on microstructure modulation and aging precipitation behavior of Al-6Si-0.75Mg-0.2Sc-0.15Zr-0.12Sb alloy[J]. Journal of Materials Engineering, 2026 , 54 (4) : 237 -249 . DOI: 10.11868/j.issn.1001-4381.2025.000360
Year 2026 volume 54 Issue 4
79
40
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2025.000360
  • Receive Date:2025-06-28
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2025-06-28
  • Accepted:2025-09-22
Affiliations
    1.AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
    2.Beijing Engineering Research Center of Advanced Aluminum Alloys and Applications,Beijing 100095,China
    3.CITlC Dicastal Co. ,Ltd. ,Qinhuangdao 066000,Hebei,China
    4.School of Materials Science and Engineering,Northeastern University,Shenyang 110167,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2025.000360
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT