收藏切换
Effect of solution treatment on grain boundary structure of Inconel 617 alloy bar
收藏切换
Jun LU1, Chunlei YANG1, Haijun SHEN1, 2, Zixing WANG1, 2
Journal of Materials Engineering | 2026, 54(4) : 229 - 236
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 229-236
• RESEARCH ARTICLE •
Effect of solution treatment on grain boundary structure of Inconel 617 alloy bar
Full
Jun LU1, Chunlei YANG1, Haijun SHEN1, 2, Zixing WANG1, 2
Affiliations
  • 1.Suzhou Jicui Gaohe Material Technology Co. ,Ltd. ,Suzhou 215558,Jiangsu,China
  • 2.Institute of Novel Metals and Applied Technologies,Jiangsu Industrial Technology Research Institute,Suzhou 215506,Jiangsu,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2025.000121
Outline
收藏切换

The grain-boundary microstructure of Inconel 617 alloy hot-rolled rods during cold drawing and subsequent solution treatment is investigated using the electron backscattering diffraction (EBSD) technique. The results reveal that the microstructure of the hot-rolled rods contains a substantial number of coincidence site lattice (CSL) grain boundaries, predominantly Σ3 grain boundaries. Following cold drawing, the proportion of CSL grain boundaries decreases significantly, while the proportion of low-angle grain boundaries experiences a sharp increase. After solution treatment at 1120 ℃, low-angle grain boundaries are almost entirely replaced by high-angle and CSL grain boundaries. As the solution temperature rises, the proportion of Σ3 grain boundaries increases, whereas the proportions of Σ9 and Σ27 grain boundaries decline. Within a specific grain-size range, the proportion of Σ3 grain boundaries rises with an increase in grain size. During the solution treatment process, annealing twin boundaries with “cluster” and “island” morphologies emerge, and there exists a Σ3 n orientation relationship between adjacent grains.

Inconel 617 alloy  /  cold drawing  /  solution treatment  /  CSL grain boundary  /  annealing twin boundary
卢俊, 杨春雷, 沈海军, 王资兴. 固溶处理对Inconel 617合金棒材晶界组织的影响. 材料工程, 2026 , 54 (4) : 229 -236 . DOI: 10.11868/j.issn.1001-4381.2025.000121
Jun LU, Chunlei YANG, Haijun SHEN, Zixing WANG. Effect of solution treatment on grain boundary structure of Inconel 617 alloy bar[J]. Journal of Materials Engineering, 2026 , 54 (4) : 229 -236 . DOI: 10.11868/j.issn.1001-4381.2025.000121
Year 2026 volume 54 Issue 4
58
27
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2025.000121
  • Receive Date:2025-03-04
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2025-03-04
  • Accepted:2025-05-09
Affiliations
    1.Suzhou Jicui Gaohe Material Technology Co. ,Ltd. ,Suzhou 215558,Jiangsu,China
    2.Institute of Novel Metals and Applied Technologies,Jiangsu Industrial Technology Research Institute,Suzhou 215506,Jiangsu,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2025.000121
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT