收藏切换
Preparation and properties of sandwich type density layered porous polyimide materials
收藏切换
Zhijian YE1, Zhengrong XU1, Jinbang LI1, Kai LI1, Jiao FU2, Jiangjuan CHANG2, Chenchun SHI1, Ningning ZHOU2
Journal of Materials Engineering | 2026, 54(4) : 313 - 321
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 313-321
• RESEARCH ARTICLE •
Preparation and properties of sandwich type density layered porous polyimide materials
Full
Zhijian YE1, Zhengrong XU1, Jinbang LI1, Kai LI1, Jiao FU2, Jiangjuan CHANG2, Chenchun SHI1, Ningning ZHOU2
Affiliations
  • 1.Ningbo Key Laboratory of Micro Nano Motion and Intelligent Control,School of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,Zhejiang,China
  • 2.Beijing Key Laboratory of Long-life Technology of Precise Rotation and Transmission Mechanisms,Beijing Institute of Control Engineering,Beijing 100094,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2024.000837
Outline
收藏切换

Porous polyimide materials (PPI) have interconnected pore structures that can effectively store lubricating oil. However,the presence of these pores will reduce the strength and wear resistance of PPI,resulting in a mutual constraint between its oil content and wear resistance,making it difficult to balance. Therefore,a sandwich type density layered porous polyimide material is prepared using the method of layered cold pressing and constant volume sintering. The outer and inner layers of the material can have different porosities. The outer layer uses a high porosity to increase oil content,while the inner layer uses a low porosity to improve material strength and wear resistance,in order to overcome the problem of difficult balance between oil content and wear resistance. Based on the study of uniform PPI performance with different densities,the pore structure of density layered PPI is designed,and two types of layered PPI are prepared. Their mechanical properties,oil content properties,and friction and wear properties are studied. The results show that compared with uniform PPI,density stratified PPI has a higher oil content (>15%) and excellent oil retention rate (94.06%) due to the synergistic effect of different porosity in the inner and outer layers,and maintains excellent mechanical and tribological properties. The tensile strength and compressive strength of the 1.0-1.1-1.0 layered material are 41.7 MPa and 374 MPa,respectively. Its friction coefficient (0.078) is close to that of a uniform PPI density of 1.1 g/cm3 (0.07),but the oil content of the layered material (15.5%) is much higher than that of the uniform material (11.1%). This sandwich type density layered PPI can balance oil content and wear resistance,providing a new approach for the design of porous materials.

density-layered materials  /  porous polyimide  /  oil-impregnated material  /  friction and wear  /  bearing retainer
叶志坚, 许峥嵘, 李锦棒, 李凯, 福姣, 常江娟, 施晨淳, 周宁宁. 三明治型密度分层多孔聚酰亚胺材料的制备与性能研究. 材料工程, 2026 , 54 (4) : 313 -321 . DOI: 10.11868/j.issn.1001-4381.2024.000837
Zhijian YE, Zhengrong XU, Jinbang LI, Kai LI, Jiao FU, Jiangjuan CHANG, Chenchun SHI, Ningning ZHOU. Preparation and properties of sandwich type density layered porous polyimide materials[J]. Journal of Materials Engineering, 2026 , 54 (4) : 313 -321 . DOI: 10.11868/j.issn.1001-4381.2024.000837
Year 2026 volume 54 Issue 4
77
37
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000837
  • Receive Date:2024-12-17
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2024-12-17
  • Accepted:2025-01-20
Funding
Affiliations
    1.Ningbo Key Laboratory of Micro Nano Motion and Intelligent Control,School of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,Zhejiang,China
    2.Beijing Key Laboratory of Long-life Technology of Precise Rotation and Transmission Mechanisms,Beijing Institute of Control Engineering,Beijing 100094,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000837
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT