收藏切换
Research progress in pyrolysis theory and technology of waste tires
收藏切换
Deqiang JI1, 2, Jia PENG1, Yuying WANG1, Dandan YUAN1, Zhida LI1, Debin JI1, Qiji SUN3, Hongjun WU1
Journal of Materials Engineering | 2026, 54(4) : 176 - 190
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 176-190
• REVIEW •
Research progress in pyrolysis theory and technology of waste tires
Full
Deqiang JI1, 2, Jia PENG1, Yuying WANG1, Dandan YUAN1, Zhida LI1, Debin JI1, Qiji SUN3, Hongjun WU1
Affiliations
  • 1.College of New Energy & Materials,Northeast Petroleum University,Daqing 163712,Heilongjiang,China
  • 2.National Key Laboratory for Multi-resource Collaborated Green Development of Continental Shale Oil,Daqing 163712,Heilongjiang,China
  • 3.College of Water Resources and Electric Power,Heilongjiang University,Harbin 150006,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2024.000709
Outline
收藏切换

The enormous number of vehicles and the industrial system generate large quantities of waste tires, and pyrolysis is considered to be an effective means of treating waste tires. This paper focuses on the current research status of waste tire pyrolysis technology, summarizes the composition and formation mechanism of waste tire pyrolysis products, and analyses the factors restricting the resource utilization of pyrolysis products and the methods to enhance the resource utilization of pyrolysis products, and puts forward the bottleneck problems that need to be broken through for the industrial application of waste tire pyrolysis technology in the future. Pyrolysis of waste tires produces a range of products such as fuel gas, oil and carbon, as well as other valuable chemicals such as limonene, benzene, toluene, ethylbenzene and others. Existing studies have indicated that the distribution of pyrolysis products from waste tires is determined by the degree of primary and secondary reactions in the pyrolysis process, and the degree of primary and secondary reactions is affected by process parameters such as temperature, heating rate, volatile retention time, pressure, reactor structure, catalysts and material particle size, among which temperature has the greatest influence on the distribution of pyrolysis products. The increase of temperature is conducive to the formation of H2, CH4, CO, benzene, toluene, ethylbenzene and xylene, and promotes the conversion of limonene to aromatics and the conversion of sulfur from pyrolysis oil and gas to pyrolysis carbon. In order to realize the industrial application of waste tire pyrolysis technology, further research work should be carried out in the accurate construction of pyrolysis kinetic models, the development of highly selective catalysts and the design of pollutant treatment schemes.

waste tire  /  pyrolysis  /  radical  /  process parameter  /  impurity removal  /  waste treatment
纪德强, 彭佳, 王玉迎, 苑丹丹, 李志达, 纪德彬, 孙启冀, 吴红军. 废旧轮胎热解理论与技术研究进展. 材料工程, 2026 , 54 (4) : 176 -190 . DOI: 10.11868/j.issn.1001-4381.2024.000709
Deqiang JI, Jia PENG, Yuying WANG, Dandan YUAN, Zhida LI, Debin JI, Qiji SUN, Hongjun WU. Research progress in pyrolysis theory and technology of waste tires[J]. Journal of Materials Engineering, 2026 , 54 (4) : 176 -190 . DOI: 10.11868/j.issn.1001-4381.2024.000709
Year 2026 volume 54 Issue 4
65
31
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000709
  • Receive Date:2024-10-15
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2024-10-15
  • Accepted:2024-12-21
Funding
Affiliations
    1.College of New Energy & Materials,Northeast Petroleum University,Daqing 163712,Heilongjiang,China
    2.National Key Laboratory for Multi-resource Collaborated Green Development of Continental Shale Oil,Daqing 163712,Heilongjiang,China
    3.College of Water Resources and Electric Power,Heilongjiang University,Harbin 150006,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000709
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT