收藏切换
Microstructure evolution of Al8.79Zn2.16Mg2.11Cu0.12Zr alloy during homogenization
收藏切换
Dayong ZHUANG1, Ping WU1, Dawei REN1, Jie LIU2, Xiang FENG1, Peng YU2
Journal of Materials Engineering | 2026, 54(4) : 250 - 257
Less
收藏切换
Journal of Materials Engineering | 2026, 54(4): 250-257
• RESEARCH ARTICLE •
Microstructure evolution of Al8.79Zn2.16Mg2.11Cu0.12Zr alloy during homogenization
Full
Dayong ZHUANG1, Ping WU1, Dawei REN1, Jie LIU2, Xiang FENG1, Peng YU2
Affiliations
  • 1.Quality Department,CSIC Longjiang Guanghan Gas Turbine Co. ,Ltd. ,Harbin 150070,China
  • 2.Process Department,Northeast Light Alloy Co. ,Ltd. ,Harbin 150060,China
Published: 2026-04-20 doi: 10.11868/j.issn.1001-4381.2024.000157
Outline
收藏切换

The microstructure evolution in Al8.79Zn2.16Mg2.11Cu0.12Zr alloy ingot during the one-step low-temperature homogenization and three-steps high-temperature homogenization is investigated by the scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and the transmission electron microscopy (TEM). The results indicate that the microstructure of the cast Al8.79Zn2.16Mg2.11Cu0.12Zr alloy is similar to that of traditional commercial Al-Zn-Mg-Cu alloys, consisting of η′(Mg(Zn, Cu, Al)2), η(MgZn2), and Fe-rich (Al7Cu2Fe) phases. The θ(Al2Cu), T(Al2Mg3Zn3),and S(Al2CuMg) phases are not present. The redissolution effect of the second phases is not enough after one-step homogenization heat treatment at low temperature(380 ℃/2,8,16,24 h) and the change of redissolution effect is not obvious even if the homogenization heat treatment time is prolonged. A large number of the eutectic organization of the second phases still remains in the original mesh structure. However, the redissolution effect is improved by increasing the homogenization heat treatment temperature to 475 ℃(430 ℃/12 h+470 ℃/4 h+475 ℃/15 h), except for a small amount of Fe-rich (Al7Cu2Fe) phases that are difficult to redissolution, the other phases are almost completely redissolution, no η′ phase transformation of S phase is detected during the one-step low-temperature homogenization and three-steps high-temperature homogenization heat treatment processes. The appearance of quench cracks occurs during the three-steps homogenization heat treatment at 475 ℃, which severely deteriorated the mechanical properties of the region near the crack in the alloy.

aluminum alloy  /  homogenization heat treatment  /  microstructure  /  S(Al2CuMg) phase
庄大勇, 武萍, 任大为, 刘杰, 冯翔, 于鹏. 均匀化过程中Al8.79Zn2.16Mg2.11Cu0.12Zr合金微观结构演变. 材料工程, 2026 , 54 (4) : 250 -257 . DOI: 10.11868/j.issn.1001-4381.2024.000157
Dayong ZHUANG, Ping WU, Dawei REN, Jie LIU, Xiang FENG, Peng YU. Microstructure evolution of Al8.79Zn2.16Mg2.11Cu0.12Zr alloy during homogenization[J]. Journal of Materials Engineering, 2026 , 54 (4) : 250 -257 . DOI: 10.11868/j.issn.1001-4381.2024.000157
Year 2026 volume 54 Issue 4
58
28
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000157
  • Receive Date:2024-03-05
  • Online Date:2026-10-27
  • Published:2026-04-20
Article Data
Affiliations
History
  • Received:2024-03-05
  • Accepted:2024-08-07
Funding
Affiliations
    1.Quality Department,CSIC Longjiang Guanghan Gas Turbine Co. ,Ltd. ,Harbin 150070,China
    2.Process Department,Northeast Light Alloy Co. ,Ltd. ,Harbin 150060,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000157
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT