收藏切换
Influence of annealing treatments on superelasticity of NiTiTaHf shape memory alloy
收藏切换
Xinye JI1, Jichen LIU1, Feng CHEN1, Kai ZHANG2, Yunxiang TONG1
Journal of Materials Engineering | 2026, 54(2) : 242 - 248
Less
收藏切换
Journal of Materials Engineering | 2026, 54(2): 242-248
• RESEARCH ARTICLE •
Influence of annealing treatments on superelasticity of NiTiTaHf shape memory alloy
Full
Xinye JI1, Jichen LIU1, Feng CHEN1, Kai ZHANG2, Yunxiang TONG1
Affiliations
  • 1.International Joint Laboratory of Advanced Nanomaterials of Heilongjiang Province,College of Materials Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China
  • 2.Jiangyin Peier Tech Co. ,Ltd. ,Jiangyin 214400,Jiangsu,China
Published: 2026-02-20 doi: 10.11868/j.issn.1001-4381.2024.000084
Outline
收藏切换

To develop a high temperature shape memory alloy with high transformation temperature and good cold-working ability,NiTiTaHf wires with a diameter of 0.2 mm are fabricated through cold drawing and subsequent annealing.The influence of annealing temperature on microstructure,martensitic transformation and superelasitic behavior of NiTiTaHf wire are investigated. The results show that the superelasticity of NiTiTaHf wire is quite sensitive to the annealing temperature. The sample annealed at 500 ℃ displays the substantial superelasticity featuring a recoverable strain of 7.6% over a broad temperature range from 20 ℃ to 200 ℃. In contrast,the sample annealed at 700 ℃ only shows a small superelastic recoverable strain (less than 3.3%)over a narrow temperature range (140-200 ℃).This difference in superelastic behavior is caused by the change of grain size resulting from the different annealing temperature,the grain size of the sample annealed at 500 ℃ is about 12 nm. This leads to the occurrence of strain glass state in the sample and the resultant superelasticity over a wide temperature range.

NiTi  /  shape memory alloy  /  superelasticity  /  strain glass  /  microstructure
季欣野, 刘继辰, 陈枫, 张凯, 佟运祥. 退火处理对NiTiTaHf形状记忆合金超弹性的影响. 材料工程, 2026 , 54 (2) : 242 -248 . DOI: 10.11868/j.issn.1001-4381.2024.000084
Xinye JI, Jichen LIU, Feng CHEN, Kai ZHANG, Yunxiang TONG. Influence of annealing treatments on superelasticity of NiTiTaHf shape memory alloy[J]. Journal of Materials Engineering, 2026 , 54 (2) : 242 -248 . DOI: 10.11868/j.issn.1001-4381.2024.000084
Year 2026 volume 54 Issue 2
72
34
Cite this Article
BibTeX
Article Info
doi: 10.11868/j.issn.1001-4381.2024.000084
  • Receive Date:2024-01-25
  • Online Date:2026-10-27
  • Published:2026-02-20
Article Data
Affiliations
History
  • Received:2024-01-25
  • Accepted:2024-02-06
Funding
Affiliations
    1.International Joint Laboratory of Advanced Nanomaterials of Heilongjiang Province,College of Materials Science and Chemical Engineering,Harbin Engineering University,Harbin 150001,China
    2.Jiangyin Peier Tech Co. ,Ltd. ,Jiangyin 214400,Jiangsu,China
References
Share
https://castjournals.cast.org.cn/joweb/clgc/EN/10.11868/j.issn.1001-4381.2024.000084
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT