Latest ArticlesConstructing heterostructures by combining COFs and TMD is a new strategy to design efficient photocatalysts for CO2 reduction reaction (CO2RR) due to their good stability, tunable band gaps and efficient charge separation. Based on the synthesis of completely novel C4N-COF in our previous reported work, a new C4N/MoS2 heterostructure was constructed and then the related structural, electronic and optical properties were also studied using first principle calculations. The interlayer coupling effect and charge transfer between the C4N and MoS2 layer are systematically illuminated. The reduced band gap of the C4N/MoS2 heterostructure is beneficial to absorb more visible light. For the formation of type-Ⅱ band alignment, a built-in electric field appears which separates the photogenerated electrons and holes into different layers efficiently and produces redox active sites. The band alignment of the heterostructure ensures its photocatalytic activities of the whole CO2 reduction reaction. Furthermore, the charge density difference and charge carrier mobility confirm the existence of the built-in electric field at the interface of the C4N/MoS2 heterostructure directly. Finally, the high optical absorption indicates it is an efficient visible light harvesting photocatalyst. Therefore, this work could provide strong insights into the internal mechanism and high photocatalytic activity of the C4N/MoS2 heterostructure and offer guiding of designing and synthesizing COF/TMD heterostructure photocatalysts.
As electrodes, two-dimensional materials show special advantages including the infinite planar lengths, broad electrochemical window, large surface-volume ratio, and much exposed active sites. In theory, the two-dimensional materials consist of the elements with high electronegativity may absorb more Na atoms, resulting in a high battery storage capacity. Based on the above idea, we selected the two dimensional metallic PS2 with 1T-Type structure as an anode material, and explored its potential applications as an electrode material for Na-ion battery through first-principle calculations. As we expected, when two dimensional PS2 is used as an anode in Na-ion battery, it can adsorb maximum three layers of sodium atoms on both sides of the monolayer, resulting in a maximum theoretical capacity of 1692 mAh/g. Furthermore, it also possesses a rather small sodium diffusion barrier of 0.17 eV, a low average open-circuit voltage of 0.18 V, and a relatively small lattice changes within 13% during the intercalation of Na. These results suggested that the two dimensional PS2 is a potentially excellent Na-ion battery anode. Our idea of designing two-dimensional anode materials with high storage capacity may provide some references for designing the next generation anode materials of metal-ion batteries.
By integrating the merits of lanthanide elements and quantum dots, we firstly design CeO2 quantum dots doped Ni-Co hydroxide nanosheet via a controllable synthetic strategy, which exhibits a large specific capacitance (1370.7 F/g at 1.0 A/g) and a good cyclic stability (90.6% retention after 4000 cycles). Moreover, we assemble an aqueous asymmetric supercapacitor with the obtained material, which has an extremely high energy density (108.9 Wh/kg at 378 W/kg) and outstanding cycle stability (retaining 88.1% capacitance at 2.0 A/g after 4000 cycles).
Transition metal oxides with high capacity are considered a promising electrode material for lithium-ion batteries (LIBs). Nevertheless, the huge volume expansion and poor conductivity severely hamper their practical application. In this work, a carbon riveting method is reported to address the above issues by designing multilayered N-doped carbon (N-carbon) enveloped Fe3O4/graphene nanosheets. When evaluated as a negative electrode, the N-carbon/Fe3O4/graphene nanocomposites demonstrate greatly enhanced electrochemical properties compared with Fe3O4/graphene. The N-carbon/Fe3O4/graphene presents a superior reversible capacity (807 mAh/g) over Fe3O4/graphene (540 mAh/g). Furthermore, it affords a considerable capacity of 550 mAh/g at 1 A/g over 700 cycles, indicating superb cycling stability. The structure-property correlation studies reveal that the carbon riveting layer is essential for enhancing the lithium diffusion kinetics. The good electrochemical properties and effective structure design make the carbon riveting strategy quite general and reliable to manipulate high performance electrodes for future LIBs.
Lithium (Li) metal, possessing an extremely high theoretical specific capacity (3860 mAh/g) and the most negative electrode potential (-3.040 V vs. standard hydrogen electrode), is one the most favorable anode materials for future high-energy-density batteries. However, the poor cyclability and safety issues induced by extremely unstable interfaces of traditional liquid Li metal batteries have limited their practical applications. Herein, a quasi-solid battery is constructed to offer superior interfacial stability as well as excellent interfacial contact by the incorporation of Li@composite solid electrolyte integrated electrode and a limited amount of liquid electrolyte (7.5 μL/cm2). By combining the inorganic garnet Aldoped Li6.75La3Zr1.75Ta0.25O12 (LLZO) with high mechanical strength and ionic conductivity and the organic ethylene-vinyl acetate copolymer (EVA) with good flexibility, the composite solid electrolyte film could provide sufficient ion channels, sustained interfacial contact and good mechanical stability at the anode side, which significantly alleviates the thermodynamic corrosion and safety problems induced by liquid electrolytes. This innovative and facile quasi-solid strategy is aimed to promote the intrinsic safety and stability of working Li metal anode, shedding light on the development of next-generation high-performance Li metal batteries.
The complex-architectured NiFe-LDH@FeOOH negative material was first prepared by simple two-step hydrothermal method. In this study, the porous nanostructure of FeOOH nanosheets features a large number of accessible channels to electroactive sites and the two-dimensional layered structure of NiFe-LDH nanosheets have an open spatial structure with high specific surface area, which enhance the diffusion of ions in the active material. Benefited from above advantages, the excellent electrochemical properties were demonstrated. NiFe-LDH@FeOOH nanocomposites present high specific capacitance (1195 F/g at a current density of 1 A/g), lower resistance and well cycling performance (90.36% retention after 1000 cycles). Furthermore, the NiFe-LDH@MnO2//NiFe-LDH@FeOOH supercapacitor exhibits 22.68 Wh/kg energy density at 750 W/kg power density, demonstrating potential application in energy storage devices.
Lithium-sulfur (Li-S) batteries have received extensive attention due to their high theoretical specific energy density. However, the utilization of sulfur is seriously reduced by the shuttle effect of lithium polysulfides and the low conductivity of sulfur and lithium sulfide (Li2S). Herein, we introduced bimetalorganic frameworks (Co/Zn-ZIF) derived cobalt and nitrogen-doped carbons (Co/N-C) into Li-S batteries through host design and separator modification. The Co/N-C in Li-S batteries effectively limits the shuttle effect through simultaneously serving as polysulfide traps and chemical catalyst. As a result, the Li-S batteries deliver a high reversible capacity of 1614.5 mAh/g and superior long-term cycling stability with a negligible capacity decay of only 0.04% per cycle after 1000 cycles. Furthermore, they have a high area capacity of 5.5 mAh/cm2.
NiS2 has become a research hotspot of anode materials for Na-ion batteries due to its high theoretical specific capacity. However, the volume effect, the dissolution of polysulfide intermediates and the low conductivity during the charge/discharge process lead to the low specific capacity and poor cycling stability. NiS2/rGO nanocomposite was prepared by a facile two-step process: GO was prepared by modified Hummers method, and then NiS2/rGO nanocomposite was synthesized by L-cys assisted hydrothermal method. NiS2/rGO nanocomposite shows excellent cycle performance and rate performance, which could be attributed to the mesoporous structure on the graphene skeleton with high conductivity. Besides, the chemical constraint of a unique S-O bond on NiS2 could inhibit the dissolution of intermediates and the loss of irreversible capacity.
Zinc-based electrochemistry energy storage with high safety and high theoretical capacity is considered to be a competitive candidate to replace lithium-ion batteries. In electrochemical energy storage, multimetal oxide cathode materials can generally provide a wider electrochemical stability window and a higher capacity compared with single metal oxides cathode. Here, a new type of cathode material, MnFe2Co3O8 nanodots/functional graphene sheets, is designed and used for aqueous hybrid Zn-based energy storage. Coupling with a hybrid electrolyte based on zinc sulfate and potassium hydroxide, the asfabricated battery was able to work with a wide electrochemical window of 0.1~1.8 V, showed a high specific capacity of 660 mAh/g, delivered an ultrahigh energy density of 1135 Wh/kg and a scalable power density of 5754 W/kg (calculated based on the cathode), and displayed a long cycling life of 1000 cycles. These are mainly attributed to the valence charge density distribution in MnFe2Co3O8 nanodots, the good structural strengthening as well as high conductivity of the cathode, and the right electrolyte. Such cathode material also exhibited high electrocatalytic activity for oxygen evolution reaction and thus could be used for constructing a Zn-air battery with an ultrahigh reversible capacity of 9556 mAh/g.
D-peptides are recognized as a new class of synthetic chemical drugs and they possess many interesting advantages such as high enzymatic stability, improved oral bioavailability, as well as high binding affinity and specificity. Recently, D-peptide drugs have been attracting increasing attention in both academic and industrial researches over recent years. One D-peptide etelcalcetide has even entered the market that targets the calcium (Ca2+)-sensing receptor (CaSR) to fight secondary hyperparathyroidism. Effective discovery and optimization of D-peptide ligands that can bind to various disease-related targets with high specificity and potency is of great importance for the development of D-peptide drugs. This review surveys the recent method development in this area especially the chemical protein synthesis-assisted high-throughput screening strategies for D-peptide ligands and their application in drug discovery.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
