Latest ArticlesGraphene oxide (GO) membranes show great potential in molecular separation for water treatment. However, the inferior stability of GO membranes is a major bottleneck for practical applications. In this study, bio-inspired polydopamine (PDA) deposition is reported for enhancing the stability of GO membranes. Through simple and mild immersion, PDA is self-polymerized on GO membranes. The blocking of PDA chains to membrane defects improves the rejections for various molecules. Because the inherently strong adhesion and crosslinking of PDA greatly strengthen the interactions of substrates to GO layers and the binding force of GO nanosheets, the prepared PDA-GO membranes exhibit impressive long-term stability in cross-flow filtration, and maintain good nanofiltration performance at various feed pressures, tangential velocities, and even after external scratching. Moreover, because the deposited PDA layers obstruct the direct contact between GO and contaminants, the antifouling property of the PDA-GO membranes increases substantially, with recovery ratio about 98%.
Acetylene black (AB), as a kind of carbon material with large specific surface area, low density, strong electron transferability, is supposed to have great potential for application in advanced oxidation processes (AOPs). In this study, AB was utilized as a peroxydisulfate (PDS) activator for the catalytic degradation of sulfamethoxazole (SMX) in aqueous media. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) techniques, zeta potential and Raman spectra were employed to characterize the features of AB. To verify the excellent performance of AB/PDS systems, a series of control experiments were carried out. Compared to graphite/PDS and biochar/PDS system, AB/PDS system could complete degradation of SMX within 15 min. Besides, the effects of key factors including AB dosage, PDS dosage, initial pH and SMX concentration on SMX degradation in AB/PDS system were elucidated systematically. Furthermore, through the radical quenching experiments, it was proved that singlet oxygen (1O2) was dominantly responsible for the degradation of SMX. Finally, based on the experiment results and comprehensive analysis, a probable reaction mechanism of AB/PDS system for SMX degradation was proposed. This work suggests that AB has a good potential for tackling the hazardous pollutants in environmental remediation.
This study aimed to construct a photoelectrocatalytic (PEC) reaction system based on the self-made reduced TiO2 NTAs (r-TNAs) photoanode and activated carbon/Polytetrafluoroethylene (AC/PTFE) cathode. It would be observed clearly that the degradation rate constant of carbamazepine (CBZ) over r-TNAs(photoanode)-AC/PTFE(cathode) PEC system (0.04961 min-1) was even higher than that of r-TNAs(photoanode)-Pt(cathode) PEC system (0.04602 min-1) with the assistance of visible light irradiation and +0.4 V external potential. Besides, in order to obtain optimized conditions, the influence of key parameters such as pH value, electric current density and electrolyte concentration were studied. Most importantly, photoelectrochemical (PECH) properties, reactive oxide species contribution, ·OH formation rate and CBZ degradation pathway were determined. The results illustrated that the excellent PEC degradation performance depended on the excellent photocatalytic property of r-TNAs photoanode and electron transfer property of photoelectrodes in r-TNAs(photoanode)-AC/PTFE(cathode) PEC system. Therefore, the study demonstrated that the r-TNAs(photoanode)-AC/PTFE(cathode) PEC system could be expected to replace metal-catalyzed cathodes depending on its excellent PEC performance activity and low cost as well as the reaction system possessed objective and practical application prospect.
Graphitic carbon nitride (g-C3N4) as a metal-free candidate of photocatalyst has received worldwide attention because of its great potentials in solar light-induced degradation and hydrogen evolution, yet the industrial application is seriously hindered by the small specific surface area and rapid recombination rate of carriers. Herein, we demonstrate that porous g-C3N4 (HCl-CNU-X) can be prepared via the co-polymerization of acidified melamine and a green bubble template (urea). Transmission electron microscopy and nitrogen sorption characterization results show that the prepared HCl-CNU-X possesses an in-plane porous structure and large specific surface area, enabling the exposure of more accessible active sites. As a result, HCl-CNU-X exhibits both enhanced photocatalytic tetracycline hydrochloride degradation and higher hydrogen evolution than bulk g-C3N4. The boosted photocatalytic performance was ascribed to the formation of the porous structure, which dramatically promotes the separation of charge-carriers and facilitates the electron transfer. This work demonstrates that the acidification of nitrogen-rich precursors combined with a bubble-template can develop a new paradigm of highly porous photocatalysts for environmental remediation and water splitting.
Electrochemical degradation of sulfamethoxazole (SMX) and its metabolite acetyl-sulfamethoxazole (Ac-SMX) by Ti/SnO2-Sb/Er-PbO2 were investigated. Results indicated that the electrochemical degradation of SMX and Ac-SMX followed pseudo-first-order kinetics. The rate constants of SMX and Ac-SMX were 0.268 and 0.072 min-1 at optimal current density of 10 and 14 mA/cm2, respectively. Transformation products of SMX and Ac-SMX were identified and the possible degradation pathways, including the cleavage of S-N bond, opening ring of isoxazole and nitration of amino group, were proposed. Total organic carbon removal of SMX was nearly 63.2% after 3 h electrochemical degradation. 22.4% nitrogen of SMX was transformed to NO3-, and 98.8% sulfur of SMX was released as SO42-. According to quantitative structure-activity relationship model, toxicities of SMX and Ac-SMX to aquatic organisms significantly decreased after electrochemical degradation. Electric energy consumption for 90% SMX and Ac-SMX degradation was determined to be 0.58-8.97 and 6.88-44.19 Wh/L at different experimental conditions, respectively. Compared with parent compound SMX, the metabolite Ac-SMX is more refractory and toxic, which emphasizes the importance of taking its metabolites into account when investigating the disposal of pharmaceuticals from wastewater.
In this work, the reduction of mercury ions (Hg2+) to elemental mercury (Hg0) was easily achieved using highly reductive carbon dots (r-CDs), which synthesized from sucrose by a simple and cost-effective method. After a careful mechanistic study, the reduction was probably accomplished with the large numbers of electrons contained in r-CDs rather than the oxidation of its functional groups. Additionally, a 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay showed that the r-CDs were nontoxic to wildlife and human beings. Consequently, the r-CDs were used as an alternative to toxic reductants (SnCl2 or NaBH4) for the sensitive and in situ determination of mercury by cold vapor generation (CVG) coupled to a miniature point discharge optical emission spectrometer (μPD-OES). Limit of detection of 0.05 μg/L was obtained for Hg2+, with relative standard deviation (RSD) less than 5.4% at a concentration of 5 μg/L. The accuracy of r-CDs induced CVG-μPD-OES was validated by the determination of mercury in a certified reference material (DOLT-5, dogfish liver) and five natural water samples collected from different rivers and lakes in Chengdu City. Since r-CDs are nontoxic and prepared from abundant and inexpensive sucrose, the r-CDs induced CVG-μPD-OES retains the great potential for the inexpensive and environmentally friendly field analysis of mercury in natural water. The accuracy of the proposed method was validated by the analysis of a certified reference material and several water samples with satisfactory results.
Metal organic frameworks (MOFs) has broad application prospect in separation, catalysis, and adsorption. By a facile green method, we successfully fabricated prGO@cHKUST-1 composite membrane with the modification of dopamine and orientated growth of MOFs. Mg/Al-layered double hydroxides (Mg/Al-LDHs) was used as a modulator to obtain cubic HKUST-1 (cHKUST-1) with excellent morphology and special properties. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) etc. characterization illustrated successful synthesis of cHKUST-1 and composite membranes. Cubic HKUST-1 can tune the inter-layer spacing of graphene oxide (GO) leading increase in hydrophilicity and flux of the membrane. Meanwhile, the reduction effect of PDA and intercalation effect of MOFs could change the stacked way of GO layers, forming several fuzzy pores and more active sites on membrane surface. The prGO@cHKUST-1 membrane has an excellent rejection for methylene blue (MB) (99.5%) and Congo red (CR) (71.2%). Moreover, the modified membrane exhibited 10 and 5 times higher permeation flux than that of original GO membrane and prGO membrane, respectively. Thus, using orientated growth of MOFs to synthesize GO based composite membrane will provide useful insights in ultrahigh permeation flux membranes of dye and oil-water emulsion separation.
Largely limited by the high dissociation energy of the O—O bond, the photocatalytic molecular oxygen activation is highly challenged, which restrains the application of photocatalytic oxidation technology for atmospheric pollutants removal. Herein, we design and fabricate the InP QDs/g-C3N4 compounds. The introduction of InP QDs promotes the charge transfer within the interface resulting in the effective separation of photo-generated carriers. Furthermore, InP QDs greatly facilitates the activation of molecular oxygen and promote the formation of O2·- under visible-light illumination. These conclusions are identified by experimental and calculation results. Hence, NO can be combined with the O2·- to form O—O—N—O intermediate to direct conversion into NO3-. As a result, the NO removal ratio of g-C3N4 has a onefold increase after InP QDs loaded and the generation of NO2 is effectively inhibited. This work may provide a strategy to design highly efficient materials for molecular oxygen activation.
Composting can enhance the nutrient elements cycling and reduce carbon dioxide production. However, little information is available regarding the application of compost for the remediation of the contaminated soil. In this study, we assess the response of the redox capacities (electron accepting capacities (EAC) and electron donating capacities (EDC)) of compost-derived humic acids (HAs) to the bioreduction of hexavalent chromium (Cr(VI)), especially in presence of hematite. The result showed that the compost-derived HAs played an important role in the bioreduction of Cr(VI) in presence and absence of hematite under the anoxic, neutral (pH 7) and motionless conditions. Based on the pseudo-first order kinetic model, the rate constants of Cr(VI) reduction increased by 1.36–2.0 times when compost-derived HAs was added. The redox capacity originating from the polysaccharide structure of compost-derived HAs made them effective in the direct Cr(VI) reduction (without MR-1) at pH 7. Meanwhile, the reduction rates were inversely proportional to the composting treatment time. When iron mineral (Fe2O3) and compost-derived HAs were both present, the rate constants of Cr(VI) reduction increased by 2.35–5.09, which were higher than the rate of Cr(VI) reduction in HA-only systems, indicating that the hematite played a crucial role in the bioreduction process of Cr(VI). EAC and quinonoid structures played a major role in enhancing the bioreduction of Cr(VI) when iron mineral and compost-derived HAs coexisted in the system. The results can extend the application fields of compost and will provide a new insight for the remediation of Cr(VI)-contaminated soil.
Multiple pollutants including pathogenic microorganism contaminations and emerging organic contaminations (EOCs) have shown a growing threat to the environment, especially the natural waters. However, the control and removal of pathogenic microorganism contaminations and EOCs have been greatly limited since limited knowledge of their environmental behaviors. Thus, a novel and efficient photocatalyst Ag2O/BiOBr heterojunction was synthesized and used for removal of multiple pollutants including Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), tetracycline and acetaminophen under visible light. The results showed that there were valid electron transfer pathways between BiOBr and Ag2O, the main electron transfer direction was the BiOBr to Ag2O. Photo-generated electrons were stored in Ag2O and thus separation efficiency between holes and photo-generated electrons was obviously enhanced. Active oxygen species were highly produced and eventually end up with the high efficiency of removal of multiple pollutants. For Ag2O/BiOBr with Ag2O content at 3% (the best performance) under visible light, log decrease of E. coli was 7.16 (removal efficiency was 100%) in 120 min, log decrease of S. aureus was 7.23 (removal efficiency was 100%) in 160 min, C/C0 of tetracycline was 0.06 in 180 min, C/C0 of acetaminophen was 0.17 in 180 min. This work could provide a promising candidate in the actual contaminated natural waters for cleaning multiple pollutants.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
