Latest ArticlesAchieving high energy densities for all-solid-state lithium batteries is restricted by the poor high voltage stability of solid electrolytes. Herein, F-doping strategy is successfully employed on Li3InCl6 to obtain enhanced voltage stability and electrode compatability towards bare LiNi0.7Mn0.2Co0.1O2 at high voltages. The optimized Li3InCl5.5F0.5 electrolyte exhibits a decreased conductivity of 1.00 mS/cm, a wider voltage window, and improved electrochemical performance in solid-state batteries when cycled at upper cut-off voltages of 4.5 and 4.8 V (vs. Li+/Li0). The generation of more stable LiInF4 phase in the cathode mixture of Li3InCl5.5F0.5-based battery ensures superior electrochemical performances compared to the Li3InCl6-based battery. The former battery exhibits a higher discharge capacity of 218.9 mAh/g and coulombic efficiency of 86.7% for the first cycle, and retains 80.0% of its original value after 100 cycles when cycled in the range of 3.0–4.5 V (vs. Li+/Li0). In contrast, the Li3InCl6-based battery exhibits lower capacities and faster degradation under the same conditions due to the formation of InCl3 phase with poor electrochemical stability. This work facilitates the advancement of high energy density solid-state battery technologies by utilizing high-voltage cathodes.
Urea-assisted water electrolysis offers a promising route to reduce energy consumption for hydrogen production and meanwhile treat urea-rich wastewater. Herein, we devised a shear force-involved polyoxometalate-organic supramolecular self-assembly strategy to fabricate 3D hierarchical porous nanoribbon assembly Mn-VN cardoons. A bimetallic polyoxovanadate (POV) with the inherent structural feature of Mn surrounded by [VO6] octahedrons was introduced to trigger precise Mn incorporation in VN lattice, thereby achieving simultaneous morphology engineering and electronic structure modulation. The lattice contraction of VN caused by Mn incorporation drives electron redistribution. The unique hierarchical architecture with modulated electronic structure that provides more exposed active sites, facilitates mass and charge transfer, and optimizes the associated adsorption behavior. Mn-VN exhibits excellent activity with low overpotentials of 86 mV and 1.346 V at 10 mA/cm2 for hydrogen evolution reaction (HER) and urea oxidation reaction (UOR), respectively. Accordingly, in the two-electrode urea-assisted water electrolyzer utilizing Mn-VN as a bifunctional catalyst, hydrogen production can occur at low voltage (1.456 V@10 mA/cm2), which has the advantages of energy saving and competitive durability over traditional water electrolysis. This work provides a simple and mild route to construct nanostructures and modulate electronic structure for designing high-efficiency electrocatalysts.
The sluggish reaction kinetics of the oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) remain obstacles to the commercial promotion of water splitting and direct methanol fuel cells. Considering the vital role of noble metals in electrocatalytic activity, this work focuses on the rational synthesis of Ni-noble metal composite nanocatalysts for overcoming the drawbacks of high cost and susceptible oxidized surfaces of noble metals. The inherent catalytic activity is improved by the altered electronic structure and effective active sites of the catalyst induced by the size effect of noble metal clusters. In particular, a series of Ni-noble metal nanocomposites are successfully synthesized by partially introducing noble metal into Ni with porous interfacial defects derived from Ni-Al layered double hydroxide (LDH). The Ni10Pd1 nanocomposite exhibits high OER catalytic activity with an overpotential of 0.279 V at 10 mA/cm2, surpassing Ni10Ag1 and Ni10Au1 counterparts. Furthermore, the average diameter of Pd clusters gradually increases from 5.57 nm to 44.44 nm with the increased proportion of doped Pd, leading to the passivation of catalytic activity due to the exacerbated surface oxidation of Pd in the form of Pd2+. After optimization, Ni10Pd1 delivers significantly enhanced OER and MOR electroactivities and long-term stability compared to that of Ni2Pd1, Ni1Pd1 and Ni1Pd2, which is conducive to the effective utilization of Pd and alleviation of surface oxidation.
Transition metal selenides are considered promising electrochemical energy storage materials due to their excellent rate properties and high capacity based on multi-step conversion reactions. However, its practical applications are hampered by poor conductivity and large volume variation for Na+ storage, which resulting fast capacity decay. Herein, a facile metal-organic framework (MOF) derived method is explored to embed Cu2-xSe@C particles into a carbon nanobelts matrix. Such carbon encapsulated nanobelts' structural moderate integral electronic conductivity and maintained the structure from collapsing during Na+ insertion/extraction. Furthermore, the porous structure of these nanobelts endows enough void space to mitigate volume stress and provide more diffusion channels for Na+/electrons transporting. Due to the unique structure, these Cu2-xSe@C nanobelts achieved ultra-stable cycling performance (170.7 mAh/g at 1.0 A/g after 1000 cycles) and superior rate capability (94.6 mAh/g at 8 A/g) for sodium-ion batteries. The kinetic analysis reveals that these Cu2-xSe@C nanobelts with considerable pesoudecapactive contribution benefit the rapid sodiation/desodiation. This rational design strategy broadens an avenue for the development of metal selenide materials for energy storage devices.
As a kind of emerging energy storage devices, Aqueous zinc ion batteries possess the characteristics of safety, low cost and environmental friendliness. However, their further application is restricted by the sluggish electrochemical reaction kinetics and low conductivity. In this work, we prepare two H3.78V6O13 electrode materials with many active sites, which promotes the kinetics of ion diffusion and then improves the capacity of the cell. The as-obtained HVO-PVP electrode possess a capacity of 393.2 and 285.9 mAh/g at 0.2 and 5.0 A/g, respectively. Moreover, the assembled Zn//HVO-PVP cells also indicate excellent specific capacity and cycle stability at different operating temperatures (0–60 ℃).
Despite significant progress has been achieved regarding the shuttle-effect of lithium polysulfides, the suppressed specific capacity and retarded redox kinetics under high sulfur loading still threat the actual energy density and power density of lithium-sulfur batteries. In this study, a graham condenser-inspired carbon@WS2 host with coil-in-tube structure was designed and synthesized using anodic aluminum oxide (AAO) membrane with vertically aligned nanopores as template. The vertical array of carbon nanotubes with internal carbon coils not only leads to efficient charge transfer across through the thickness of the cathode, but also provides significant confinement to polysulfide diffusion towards both the lateral and longitudinal directions. Few-layer WS2 in the carbon coils perform a synergistic role in suppressing the shuttle-effect as well as boosting the cathodic kinetics. As a result, high specific capacity (1180 mAh/g at 0.1 C) and long-cycling stability at 0.5 C for 500 cycles has been achieved at 3 mgS/cm2. Impressive areal capacity of 7.4 mAh/cm2 has been demonstrated when the sulfur loading reaches 8.4 mg/cm2. The unique coil-in-tube structure developed in this work provides a new solution for high sulfur loading cathode towards practical lithium-sulfur batteries.
Natural phytoconstituents exhibit distinct advantages in the management and prevention of inflammatory bowel disease (IBD), attributed to their robust biological activity, multi-target effects, and elevated safety profile. Although promising, the clinical application of phytoconstituents have been impeded by poor water solubility, low oral bioavailability, and inadequate colonic targeting. Recent advancements in nanotechnology has offered prospective avenues for the application of phytoconstituents in the treatment of IBD. A common strategy involves encapsulating or conjugating phytoconstituents with nanocarriers to enhance their stability, prolong intestinal retention, and facilitate targeted delivery to colonic inflammatory tissues. Furthermore, drawing inspiration from the self-assembling nanostructures that emerge during the decoction process of Chinese herbs, a variety of natural active compounds-based nanoassemblies have been developed for the treatment of IBD. They exhibit high drug-loading capacities and surmount the challenges posed by poor water solubility and low bioavailability. Notably, phyto-derived nanovesicles, owing to their unique structure and biological functions, can serve as therapeutic agents or novel delivery vehicles for the treatment of IBD. Consequently, this review provides an extensive overview of emerging phytoconstituent-derived nano-medicines/vesicles for the treatment of IBD, intending to offer novel insights for the clinical management of IBD.
Nickel-rich cathode materials have received widespread attention due to their high energy density. However, the poor rate capability and inferior cycle stability seriously hinder their large-scale application. The traditional co-precipitation method for preparing them has a long process and easily arises agglomeration leading to inhomogeneous element distribution. Here, a novel precursor containing Li element was prepared by ultrafast spray pyrolysis (SP) in 3–5 s. Then the precursor was used to synthesize pristine LiNi0.9Co0.05Mn0.05O2 (NCM90) and 1% Mg modified LiNi0.9Co0.05Mn0.05O2 (NCM90-Mg1). This method gets rid of mixing Li/Mg source and the precursor prepared by common co-precipitation, thus could achieve homogeneous lithiation and Mg2+ doping. The cell parameter c is expanded, and the cation disorder is reduced after Mg2+ doping. Furthermore, the harmful H2-H3 phase transition in NCM90-Mg1 is also well suppressed. As a result, the obtained NCM90-Mg1 shows better electrochemical performance than NCM90. Within 2.8–4.3 V (25 ℃), the specific discharge capacity of NCM90-Mg1 at 5 C is as high as 169.1 mAh/g, and an outstanding capacity retention of 70.0% (10.0% higher than NCM90) can be obtained after 400 cycles at 0.5 C. At 45 ℃, a capacity retention of 81.9% after 100 cycles at 1 C is recorded for NCM90-Mg1. Moreover, the NCM90-Mg1 also exhibits superior cycle stability when cycled at high cut-off voltage (4.5 V, 25 ℃), possessing the capacity retention of 79.2% after 200 cycles at 1 C. Therefore, SP can be proposed as a powerful method for the preparation of multi-element materials for next-generation high energy density LIBs.
As one of the most common gynecological malignancies, peritoneal metastasis is a common feature and cause of high mortality in ovarian cancer (OC). Currently, the standard treatment for OC and its peritoneal metastasis is maximal cytoreductive surgery (CRS) combined with platinum-based chemotherapy. Compared with intravenous chemotherapy, traditional intraperitoneal (IP) chemotherapy exhibits obvious pharmacokinetic (PK) advantages and systemic safety and has shown significant survival benefits in several clinical studies of OC patients. However, there remain several challenges in traditional IP chemotherapy, such as insufficient drug retention, a lack of tumor targeting, inadequate drug penetration, gastrointestinal toxicity, and limited inhibition of tumor metastasis and chemoresistance. Nanomedicine-based IP targeting delivery systems, through specific drug carrier design with tumor cells and tumor environment (TME) targeting, make it possible to overcome these challenges and maximize local therapy efficacy while reducing side effects. In this review article, the rationale and challenges of nanomedicine-based IP chemotherapies, as well as their in vivo fate after IP administration, which are crucial for their rational design and clinical translation, are firstly discussed. Then, current strategies for nanomedicine-based targeting delivery systems and the relevant clinical trials in IP chemotherapy are summarized. Finally, the future directions of the nanomedicine-based IP targeting delivery system for OC and its peritoneal metastasis are proposed, expecting to improve the clinical development of IP chemotherapy.
Electrocatalytic nitrate reduction reaction (NO3−RR) is a green and competitive method for removing nitrate from water, requiring highly active and long-term stable electrocatalysts. In this work, we report a Cu0 nanorod catalyst with disordered structure (re-Cu NRs), prepared by electrochemical in situ reconfiguration of copper-based nitrides (Cu3N NRs). The amorphous structure allows the exposure of abundant active sites to enhance the electrocatalytic activity because of the disordered atomic arrangement. At a potential of −1.2 V vs. Ag/AgCl, the re-Cu NRs catalyst achieved nearly 100% nitrate conversion within 120 min at a low nitrate concentration (50 mg/L), without the accumulation of nitrite. In-situ DEMS detection reveals that the NO3−RR on re-Cu NRs followed the pathway of *NO3−→ *NO2−→ *NO → *N → *NH → *NH2 → *NH3. Furthermore, combining this proposed pathway with electrochlorination could efficiently transform ammonia into harmless N2 (~99.41%). Theoretical calculations confirm that the amorphous structure on the surface of re-Cu NRs catalysts can facilitate strongly adsorbed nitrate, weaken the rate-determining step of *NH3 → NH3, and suppress hydrogen evolution reaction (HER). This study provides a new approach for designing efficient and stable amorphous catalysts for electrocatalytic nitrate reduction.
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
