Ligand-bridged nanoassemblies boost the peroxidase-mimicking activity of gold nanoclusters

Ligand-bridged nanoassemblies boost the peroxidase-mimicking activity of gold nanoclusters

PDF

Jin-Ao Li^a, Nana Pan^b, Li Lu^a, Yifan Wei^a, Wenchang Hu^a, Zhiyang Zhang^a, Houda Amrani^a, Fang Huang^a, Xiaojuan Wang^a

Chinese Chemical Letters | 2026, 37(1) : 111806

Less

Chinese Chemical Letters | 2026, 37(1): 111806

• Communication •

Ligand-bridged nanoassemblies boost the peroxidase-mimicking activity of gold nanoclusters

Full

Jin-Ao Li^a, Nana Pan^b, Li Lu^a, Yifan Wei^a, Wenchang Hu^a, Zhiyang Zhang^a, Houda Amrani^a, Fang Huang^a, Xiaojuan Wang^a

Affiliations

^aState Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), Qingdao 266580, China

^bDepartment of Cardiology, the Affiliated Hospital of Qingdao University, Qingdao 266003, China

About Author:

CRediT authorship contribution statement

Jin-Ao Li: Data curation, Methodology, Writing – original draft.

Nana Pan: Visualization, Data curation.

Li Lu: Validation, Methodology.

Yifan Wei: Validation, Investigation.

Wenchang Hu: Visualization, Investigation.

Zhiyang Zhang: Methodology, Data curation.

Houda Amrani: Validation, Methodology.

Fang Huang: Project administration, Funding acquisition.

Xiaojuan Wang: Writing – review & editing, Funding acquisition, Conceptualization.

Published: 2026-01-15 doi: 10.1016/j.cclet.2025.111806

Outline

Abstract

Less

Rational design of nanozymes with enhanced catalytic efficiency remains a central challenge in the development of artificial enzymes. Herein, we report the construction of ultrasmall gold nanocluster-based nanoassemblies (Dp-AuNCs@Fe²⁺) through the coordination of Fe²⁺ ions by a dopa-containing peptidomimetic ligand (DpCDp). This nanoarchitecture simultaneously integrates catalytically active gold cores and redox-active Fe²⁺ centers, bridged by DpCDp to facilitate directional electron transfer. Comprehensive spectroscopic and kinetic analyses reveal that DpCDp promotes efficient charge migration from the Au core to surface-bound Fe²⁺, significantly enhancing H₂O₂-mediated peroxidase-like activity. Compared to bare Dp-AuNCs, Dp-AuNCs@Fe²⁺ display a 4.3-fold improvement in detection sensitivity, a 6.7-fold increase in catalytic efficiency, and markedly stronger hydroxyl radical generation. Mechanistically, this activity stems from a synergistic triad: direct H₂O₂ oxidation at gold surfaces, radical generation at Fe²⁺ sites, and DpCDp-facilitated electron shuttling. This work presents a robust strategy for nanozyme enhancement via electronic and structural co-engineering, offering valuable insights for the future design of bioinspired catalytic systems.

Key words

Gold nanoclusters / Fe²⁺ coordination / Peptidomimetic ligand / Peroxidase-mimic nanozyme / Electron transfer

Cite this Article

Jin-Ao Li, Nana Pan, Li Lu, Yifan Wei, Wenchang Hu, Zhiyang Zhang, Houda Amrani, Fang Huang, Xiaojuan Wang. Ligand-bridged nanoassemblies boost the peroxidase-mimicking activity of gold nanoclusters[J]. Chinese Chemical Letters, 2026 , 37 (1) : 111806 - . DOI: 10.1016/j.cclet.2025.111806

Full Text

Less

Natural enzymes demonstrate precise catalytic specificity through optimal spatial complementarity between active sites and substrates [1]. However, their protein/RNA nature imposes intrinsic constraints: Limited stability, narrow operational parameters, and prohibitive production costs from intricate purification protocols [2,3]. Nanozymes, engineered nanomaterials mimicking enzymatic functions, overcome these limitations by offering exceptional stability, environmental robustness, and scalable synthesis [4,5]. Their catalytic activity and selectivity are tunable through tailoring size, morphology, and composition [6]. This emerging class of artificial catalysts not only addresses the partial bottlenecks of traditional enzymatic systems but also establishes a novel pathway for overcoming technological barriers in catalysis-driven fields, thereby propelling transformative innovations through functional customization [7].

Peroxidase (POD)-mimic have garnered significant attention due to their unique capacity to catalytically decompose hydrogen peroxide (H₂O₂) into reactive oxygen species [8,9]. These exceptional catalytic properties enable diverse applications in biosensing [10,11], tumor therapeutics [12], and environmental monitoring [13]. The catalytic performance of nanomaterial-based POD-mimic can be precisely optimized through strategic modulation of composition and structural parameters. Researchers have engineered various nanomaterial systems for POD-mimic, including transition metal oxides [14], carbon-based architectures [15], and noble metal clusters [16,17]. Notably, gold nanoclusters (AuNCs) exhibit molecular-like characteristics, ultrahigh surface-to-volume ratios, and exceptional optical properties, coupled with stable catalytic capabilities [18-20]. Such advantages establish AuNCs as a transformative material platform, driving innovations in analytical diagnostics and biomedical technologies while emerging as a focal point in advanced nanozyme research [21-23].

To advance the practical utility of AuNCs, strategic paradigms have been developed to enhance their POD-mimic activity. Kernel engineering approaches involve alloying with transition metals (Pt, Pd) to modulate electronic structure [24,25], thereby improving H₂O₂ activation capacity. Surface modification methodologies have also demonstrated efficacy, exemplified by Zhang's synthesis [26] of AuNCs using amine-terminated thiol ligands with truncated carbon chains, which increased substrate affinity and reduced steric hindrance. Post-synthetic functionalization with catalytic cofactors (aptamers [27,28], imidazole derivatives [29]) further amplifies substrate affinity through surface adsorption mechanisms, achieving catalytic enhancement for biosensing applications. These orthogonal optimization strategies effectively address the activity issue in nanozyme design while expanding the applicability of AuNCs in practical application.

While notable progress has been achieved in augmenting the POD-mimetic activity of AuNCs through core structural modulation and surface functionalization, translational implementation confronts potential barriers. Crucial limitations involve synthesis protocol complexity, unstable catalytic amplification efficiency, and inadequate spatial coupling precision between heterocomponents. These challenges highlight the imperative for establishing facile operational methodologies with precisely regulated catalytic outputs, which would significantly advance AuNCs-based nanozyme applications in next-generation bio-detection systems and targeted therapeutic interventions.

Based on the preceding analysis, a nanoassembly termed Dp-AuNCs@Fe²⁺ (AuNCs@Fe²⁺) was constructed by integrating two catalytically active components, Dp-AuNCs (AuNCs) and ferrous ions (Fe²⁺), via precise self-assembly bridged by the ligand molecules. Notably, electron transfer within the nanoassembly, as well as charge transport between the assembly and hydrogen peroxide (H₂O₂), was efficiently facilitated through coordination among the gold core, tailored ligands, and chelated iron ions. This synergistic interaction significantly enhanced the catalytic performance, enabling efficient conversion of H₂O₂ into hydroxyl radicals (^•OH).

To endow the system with the desired functionality, the design of the gold nanoclusters ligand was of central importance. There ligand was required to fulfill multiple roles: stabilizing the gold nanoclusters during synthesis and assembly, precisely chelating Fe²⁺ ions, and promoting effective intracluster electron transfer. To meet these criteria, l-dopa and cysteine were selected as the core structural units. l-dopa provides phenolic hydroxyl groups capable of chelating metal ions, while cysteine introduces a thiol group that forms robust Au-S covalent bonds, ensuring nanocluster stability. Two peptidomimetic ligands, DpCDp and CDpE, were synthesized via standard peptide-coupling protocols, wherein dopa and natural amino acids were covalently linked through amide bonds. Their sequences, chemical structures, and nomenclature are detailed in Table S1 (Supporting information).

Short peptides have previously been utilized for the synthesis of gold nanoclusters [30-32]. However, many such ligands serve singular purposes, such as stabilizing the nanoclusters, lacking additional functional groups for further interaction or catalytic enhancement. In contrast, our peptidomimetic ligands were engineered to offer multiple functions. Under physiological pH (7.4), their phenolic hydroxyls groups readily deprotonate to form phenoxide anions [33], which serve as effective chelation sites for Fe²⁺. Upon coordination, these phenoxide ligands enable electron delocalization within the Fe²⁺–catechol complex, producing enhanced absorption in the visible region and generating a characteristic purple Dopa/Fe²⁺ chelate with a 2:1 stoichiometry. The ligands were deliberately designed to align with this coordination behavior (Fig. 1A).

The distinct Fe²⁺-chelating properties of the free peptidomimetics were initially validated via titration experiments in solution (Fig. S1 in Supporting information). UV–vis absorption spectroscopy revealed that DpCDp and CDpE exhibited characteristic ligand-to-metal charge-transfer bands at 560 and 580 nm, respectively, consistent with previously reported catechol-Fe²⁺ complexes [34]. As a control, the wildly used ligand glutathione (GSH) failed to induce any new absorption peaks (Fig. S1E), underscoring the indispensable role of ortho-diphenolic groups in metal coordination. This finding was further supported by the visual color changes observed upon Fe²⁺ addition (Fig. S1F), Job's plot analyses determined a binding stoichiometry of 1:1 for DpCDp: Fe²⁺ (Fig. 1B) and 2:1 for CDpE: Fe²⁺ (Fig. S2 in Supporting information), indicating that Fe²⁺-chelating capacity was closely correlated with the number of ortho-diphenol moieties. The presence of bis-dopa units in DpCDp conferred a superior Fe²⁺ chelating ability compared to CDpE, which contains a single dopa group. The binding constant (K = 806.45 L/mol) and molar extinction coefficient (ε = 21,034.9 L mol⁻¹ cm⁻¹) for the DpCDp/Fe²⁺ complex were obtained by fitting the absorbance data (Fig. S3 in Supporting information) using equations derived from the law of mass conservation and chemical equilibrium principles. To validate the Fe²⁺-binding specificity of DpCDp, a competitive chelation assay was performed using EDTA [35]. Upon addition of EDTA to the pre-formed DpCDp/Fe²⁺ complex, a significant decrease in the absorbance at 560 nm was observed (Fig. S4 in Supporting information), confirming that Fe²⁺ was chelated by DpCDp.

In addition to Fe²⁺ chelation, the ligand must also stabilize the gold nanoclusters and modulate their electronic structure to achieve the desired physicochemical properties [36]. However, the use of dopa-containing peptidomimetics in gold nanoclusters synthesis poses two primary challenges: (1) The hydrophobic aromatic moieties are liable to inter-cluster aggregation, compromising colloid stability; (2) The ortho-bisphenol groups are prone to oxidation, which can diminish their metal-chelating efficiency. To address these limitations, GSH, a ligand known for its hydrophilicity and reducing capability, was introduced as a co-ligand [37]. This strategy enabled the facile, one-pot hydrothermal synthesis of orange-fluorescent Dp-AuNCs (Fig. 1C), with imoproved stability and functionality.

The transmission electron microscopy (TEM) analysis (Fig. 1D) demonstrated that the Dp-AuNC products were spherical, uniformly distributed, and well dispersed in aqueous media. The observed lattice fringes exhibited a spacing of approximately 0.22 nm, consistent with the crystalline structure of metallic gold reported in the literature [38,39]. Subsequent characterization of the synthesized product revealed a distinct fluorescence emission peak centered at 600 nm under 404 nm excitation (Fig. 1E). The UV–vis absorption spectrum (Fig. 1F) lacked the characteristic 520 nm plasmon resonance peak [40], indicating absence of large gold particles. A notable absorption feature at 280 nm was assigned to the catechol groups of peptidomimetic ligand bound to on the Au core. X-ray photoelectron spectroscopy (XPS) analysis confirmed the surface elemental composition and valence states. The survey spectrum (Fig. S5A in Supporting information) revealed signals corresponding to both the gold core and organic ligands, while the high-resolution Au 4f spectrum (Fig. S5B in Supporting information) showed the coexistence of Au⁰ and Au⁺ species [41], corroborating successful formation of ultrasmall gold nanocluster.

With DpCDp ligands covalently anchored to gold nanoclusters via Au–S bonds, their catechol moieties were subsequently employed to coordinate Fe²⁺ ions, yielding the nanoassemblies Dp-AuNCs@Fe²⁺. Unlike previously reported multicomponent complexes stabilized by weak interactions such as electrostatics or physisorption [42,43], which are often plagued by constituent leaching and poor stability, our system leverages dopa-containing peptidomimetic ligands as bridges to achieve precise and robust assembly. Owing to the multidentate nature of DpCDp, Fe²⁺ ions were able to simultaneously coordinate with catechol groups on different ligands across separate nanoclusters, thereby forming interparticle cross-links (Fig. 2A). This coordination-driven assembly strategy effectively enables the construction of higher-order AuNC structures. Size and morphology analyses confirmed substantial growth upon Fe²⁺ coordination: the hydrated diameter increased from 3.03 nm to 15.91 nm (Fig. 2B), while TEM images showed expansion from 1.35 nm to 12.25 nm (Fig. 2C and Fig. S6 in Supporting information). Notably, high-resolution TEM image (Fig. 2D) clearly reveals that individual nanoassemblies are composed of multiple small-sized cluster cores, providing strong evidence that Dp-AuNCs@Fe²⁺ formation results from Fe²⁺-mediated bridging of Dp-AuNCs via DpCDp ligands. Furthermore, a reduction in zeta potential indicated decreased electrostatic repulsion among clusters, which also facilitated aggregation through DpCDp/Fe²⁺ coordination (Fig. S7 in Supporting information).

In addition to structural characterization, optical analyses revealed substantial changes in the electronic properties of the nanoclusters upon Fe²⁺-induced assembly. UV–vis spectroscopy showed the emergence of a distinct absorption peak at 580 nm following Fe²⁺ addition, with intensity increasing proportionally to Fe²⁺ concentration and reaching a plateau above 100 µmol/L ([Dp-AuNCs] = 296.8 µg/mL) (Fig. 2E, Figs. S8A and B in Supporting information). This rapid development is completed within 120 s (Fig. S8C in Supporting information), indicating the formation of a visible-light-absorbing DpCDp–Fe²⁺ chelate. Notably, the 580 nm peak is red-shifted by ~20 nm compared to the free DpCDp/Fe²⁺ complex (560 nm), suggesting that interactions with the gold surface may alter the local charge distribution or steric configuration of the ligands, thereby modulating Fe²⁺ coordination behavior [44]. Inductively coupled plasma mass spectrometry (ICP-MS) analysis yielded consistent results, showing that at a total Dp-AuNCs concentration of 296.8 µg/mL, the maximum concentration of Fe²⁺ bound to the nanoclusters reached 100 µmol/L, suggesting that the surface-bound DpCDp ligand concentration was also approximately 100 µmol/L (Fig. S9 in Supporting information). Control experiments employing GSH-AuNCs, which lack the DpCDp ligand, exhibited no spectral change upon Fe²⁺ addition (Fig. S10A in Supporting information), confirming DpCDp as the essential chelating moiety. Endowed with thiol and vicinal bisphenol groups, DpCDp serves as a "bridge" to connect Dp-AuNCs and Fe²⁺, thus promoting the formation of nanoassemblies. After treatment with EDTA significantly reduced the 580 nm absorbance, verifying that Fe²⁺ was bound to AuNCs-anchored DpCDp ligands rather than remaining free in solution (Fig. S10B in Supporting information). Moreover, a notable size reduction was observed in the system, which was comparable to that of Dp-AuNCs alone, further underscoring the bridging function of DpCDp (Fig. S11 in Supporting information). These results suggest that the size and optical properties of the Fe²⁺-bridged Dp-AuNC assemblies Dp-AuNCs@Fe²⁺ are tunable through precise modulation of the DpCDp ligand density and the Fe²⁺/Dp-AuNC ratio.

To evaluate the catalytic performance of the nanoassemblies, we assessed the peroxidase (POD)-mimicking activity of Dp-AuNCs and Dp-AuNCs@Fe²⁺ using 3,3′,5,5′-tetramethylbenzidine (TMB) as a chromogenic substrate, monitored by absorbance at 652 nm (Fig. 3A). In the absence of H₂O₂, neither TMB alone nor its mixtures with Dp-AuNCs or Dp-AuNCs@Fe²⁺ showed appreciable absorbance, indicating no oxidase-like activity. In contrast, when TMB and H₂O₂ were co-incubated with Dp-AuNCs, Fe²⁺, or Dp-AuNCs@Fe²⁺, a significant increase in absorbance was observed, accompanied by a clear blue coloration of the solution (Fig. 3B). These results confirm that the catalytic activity requires both the presence of H₂O₂ and the nanomaterials or metal ions, consistent with a POD-like reaction mechanism. Critically, the catalytic performance of Dp-AuNCs@Fe²⁺ exceeded that of Dp-AuNCs or Fe²⁺ alone, suggesting a synergistic rather than additive effect. To quantify this enhancement, a series of nanoassemblies with varying Fe²⁺ chelation densities was prepared (Fig. 3C). All variants exhibited catalytic activities surpassing the theoretical sum of their individual components, with activity increasing proportionally with Fe²⁺ loading. This trend suggests that Fe²⁺ ions, through coordination with the DpCDp ligands, modulate the electron density of the Dp-AuNCs cores and enhance the catalytic turnover.

The enhanced activity of Dp-AuNCs@Fe²⁺ was further validated using a range of additional peroxidase substrates, confirming the generalizability of the observed catalytic behavior (Figs. S12A–C in Supporting information). Gold nanoclusters are known to function as peroxidase mimics, with Au(Ⅰ) sites serving as catalytic centers [45], and their efficiency is intimately linked to interfacial electron density and mobility [46]. Fe²⁺, due to its reversible redox behavior, can effectively accept electrons from the Dp-AuNC core upon chelation, thereby promoting interfacial charge transfer and enhancing the electron-rich environment at the catalytic interface [47]. This charge redistribution not only enhances the decomposition of H₂O₂ but also improves overall catalytic performance. Furthermore, Fe²⁺ itself contributes intrinsic catalytic activity via Fenton-like reactions, generating hydroxyl radicals that directly promote substrate oxidation. The dual role of Fe²⁺, as both an electron mediator and a catalytic species, creates a synergistic effect that exceeds the simple additive contributions of Dp-AuNCs and Fe²⁺ alone. In contrast, other metal ions tested (e.g., Co²⁺, Mn²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Cu²⁺, Ni²⁺) either lack sufficient redox activity or fail to mediate efficient charge transfer, and thus do not significantly improve the catalytic activity of Dp-AuNCs (Fig. 3D) [48-50]. This specificity underscores the unique and indispensable role of Fe²⁺ in the observed POD-mimicking catalysis.

In addition to catalytic efficiency, the operational stability of the system was evaluated. Benefiting from the stabilizing effect of DpCDp-mediated Fe²⁺ chelation, Dp-AuNCs@Fe²⁺ retained approximately 90% of its initial activity after 30 days of storage at 4 ℃ (Fig. 3E), demonstrating excellent long-term stability of the nanoassemblies. Moreover, we observed that the catalytic efficiency of Dp-AuNCs@Fe²⁺ retained over 85% after three successive recovery cycles (Fig. S13 in Supporting information). These findings collectively confirm the structural robustness of Dp-AuNCs@Fe²⁺.

The Dp-AuNCs@Fe²⁺ nanoassemblies exhibit superior peroxidase-mimicking activity. Comparative catalytic studies were performed under identical H₂O₂ concentrations to assess their responsiveness. Absorption spectral analysis revealed that Dp-AuNCs@Fe²⁺ catalyzed TMB-H₂O₂ reactions with markedly stronger signal changes than bare Dp-AuNCs, especially as H₂O₂ concentrations increased (Figs. S14A and B in Supporting information). Quantification at 652 nm confirmed this enhanced responsiveness (Fig. S14C in Supporting information), and the resulting color gradients were clearly discernible by the naked eye (Fig. S14D in Supporting information). Both systems displayed linear responses to H₂O₂ concentrations ranging from 0 to 200 µmol/L; however, Dp-AuNCs@Fe²⁺ achieved a detection limit of 0.27 µmol/L, representing a 4.3-fold improvement over bare Dp-AuNCs (1.17 µmol/L, Fig. 3F). This heightened sensitivity reflects the catalytic enhancement imparted by the Fe²⁺–Dp-AuNC synergism mediated through DpCDp coordination.

To elucidate the origin of this enhancement, we investigated the electronic interactions within the nanoassembly. In catalytic H₂O₂ reactions, the mechanism generally involves three sequential steps: substrate adsorption, activation, and product desorption [51,52]. The activation step is typically governed by charge transfer between the catalytic center and the substrate, and a high electron density at the catalytic interface is crucial for enhancing this process [53]. Gold nanoclusters, with delocalized valence electrons, serve as efficient electron donors [54], while Fe²⁺, possessing incomplete 3d orbitals, acts as an electron acceptor [55]. Upon coordination through the peptidomimetic ligand, partial electron transfer from Fe²⁺ to the π^* orbitals of DpCDp results in the formation of back-donated π bonds [56]. Simultaneously, DpCDp bridges gold cores and Fe²⁺ centers with sub-nanometer precision, minimizing donor-acceptor distance and facilitating electron flow (Fig. 4A). This dual role of DpCDp—as both electronic mediator and structural linker—amplifies interfacial charge migration, enabling superior peroxidase-like activity.

Fluorescence studies further confirmed the electron transfer. A noTable 45% fluorescence quenching occurred upon Fe²⁺ binding to Dp-AuNCs, in stark contrast to only 12% quenching in DpCDp-free GSH-AuNCs (Fig. 4B). Spectral analysis showed progressive quenching with increasing Fe²⁺ levels (Figs. S15A and B in Supporting information), accompanied by a significant decrease in fluorescence lifetime (Fig. 4C and Fig. S16 in Supporting information), indicating accelerated electron transfer from the Au core to Fe²⁺.

XPS provided additional insight [57]. A 0.3 eV positive shift in the Au 4f binding energy of Dp-AuNCs@Fe²⁺ compared to pristine Dp-AuNCs was observed (Fig. 4D), attributed to electron redistribution from the Au core to the Fe²⁺ coordination sites via DpCDp. Collectively, these findings demonstrate that the enhanced peroxidase-like activity of Dp-AuNCs@Fe²⁺ arises from efficient charge transfer mediated by DpCDp.

Given that the peroxidase-mimicking mechanism involves single-electron [58] oxidation of H₂O₂ to generate ^•OH (POD → e⁻ + h⁺, e⁻ + H₂O₂ → ^•OH + OH⁻), the superior electron-shuttling capacity of Dp-AuNCs@Fe²⁺ was further validated. Upon exposure to H₂O₂, Dp-AuNCs@Fe²⁺ displayed a 32.7% decrease in fluorescence intensity, significantly higher than the 11.5% drop in Dp-AuNCs alone (Fig. 4E), demonstrating that Dp-AuNCs@Fe²⁺ transfer electrons more efficiently to H₂O₂. Moreover, fluorescence resonance energy transfer (FRET) [59] analysis leveraging spectral overlap between Dp-AuNCs emission and oxidized TMB absorption revealed a quenching efficiency of 98.7% for Dp-AuNCs@Fe²⁺, over twice that of the control system (47.2%). These results indicate superior electron donation to H₂O₂, facilitating ^•OH generation.

To further elucidate the working mechanism of Dp-AuNCs@Fe²⁺, electrochemical assays were employed to compare the catalytic activities of Dp-AuNCs and Dp-AuNCs@Fe²⁺ toward H₂O₂. Following their immobilization onto the glassy carbon electrode, both systems exhibited reduction currents in N₂-saturated acetic acid-sodium acetate electrolyte (Figs. 4F and G), confirming electron transfer from donors to H₂O₂ as the acceptor. Notably, Dp-AuNCs@Fe²⁺ demonstrated substantially higher reductive activity than Dp-AuNCs, indicating its capacity to transfer more electrons to H₂O₂, validating the marked enhancement in its catalytic capacity. As catalyst charge transfer capability generally correlates with impedance [60], electrochemical impedance spectroscopy (EIS) was used to compare resistances between the two. The latter showed smaller radius than the former, corresponding to lower resistance, thus enabling Dp-AuNCs@Fe²⁺ to achieve faster electron transfer rates (Fig. S17 in Supporting information), which matches its strong catalytic capacity.

On the other side, chelated Fe²⁺ contributed to the POD-mimicking activity through a typical action pathway (Fe²⁺ + H₂O₂ → Fe³⁺ + ·OH + OH⁻) [61] and the optimized adsorption geometries coupled with the spillover of core electrons in Dp-AuNCs boosted its affinity with the substrate. To quantify this activity, Michaelis-Menten kinetic analyses were conducted (Fig. S18 in Supporting information). Dp-AuNCs@Fe²⁺ showed a reduced K_m for H₂O₂ (0.387 mmol/L vs. 0.525 mmol/L for Dp-AuNCs) and an elevated V_max (7.163 µmol L^-1 min^-1 vs. 1.451 µmol L^-1 min^-1), corresponding to a 6.7-fold increase in catalytic efficiency (V_max/K_m, Fig. 4H). Similar kinetic advantages were observed for TMB oxidation (Fig. S19 in Supporting information). When benchmarked against previously reported peroxidase-mimicking nanozymes, many of which rely on physical adsorption or electrostatic interactions, the DpCDp-bridged Dp-AuNCs@Fe²⁺ system demonstrated superior catalytic activity (Table S2 in Supporting information). This enhancement is attributed to the stable spatial coordination and improved interfacial electron transfer between the two functional components.

Furthermore, electron paramagnetic resonance (EPR) spectroscopy provided direct evidence of ^•OH generation. Dp-AuNCs@Fe²⁺ produced a characteristic 1:2:2:1 quartet signal corresponding to DMPO—OH adducts [62], with signal intensity exceeding that of bare Dp-AuNCs by more than fourfold (Fig. 4I).

We thus delineate a tripartite catalytic mechanism for Dp-AuNCs@Fe²⁺: (1) Direct oxidation of H₂O₂ at gold surfaces, (2) Fe²⁺-driven Fenton-like ^•OH generation, and (3) DpCDp-mediated electron transfer bridging gold and Fe²⁺. This multifunctional integration leads to a synergistic enhancement of peroxidase-mimicking activity far exceeding that of individual components.

In summary, Dp-AuNCs@Fe²⁺ nanoassemblies were rationally designed using a dopa-containing peptidomimetic ligand (DpCDp) to bridge ultrasmall Au nanoclusters with Fe²⁺ ions. The resulting assemblies exhibit significantly enhanced peroxidase-like activity due to efficient electron transfer from the Au core to catalytic interfaces. This work demonstrates a versatile strategy for constructing highly active artificial enzymes and provides a conceptual framework for future nanozyme development via electronic and structural integration.

References

Less

Y.Z. Qiu, G.J. Tan, Y.Q. Fang, et al., New J. Chem. 45 (2021) 20987–21000.

Z.W. Qi, L. Wang, Q. You, et al., Biosens. Bioelectron. 96 (2017) 227–232.

J.Y. Sheng, Y.H. Wu, H. Ding, et al., Adv. Mater. 36 (2024) 2211210.

M.J. Deka, Int. Nano Lett. 13 (2023) 1–14.

Y.H. Xia, K.M. Sun, Y.N. Zuo, et al., Chin. Chem. Lett. 33 (2022) 2081–2085.

K.X. Lv, L.M. Wang, Y.J. Ma, et al., Biomater. Adv. 136 (2022) 212778.

X.S. Wu, B.L. Wang, Y.C. Li, et al., Chin. Chem. Lett. 36 (2025) 110211.

R.X. Liu, F. Shi, Y.P. Xia, et al., Chin. Chem. Lett. 35 (2024) 109664.

H. Liu, Y.N. Ding, B.C. Yang, et al., ACS Sustain. Chem. Eng. 6 (2018) 14383–14393.

F. Shi, G.L. Li, H.B. Zhu, et al., Chin. Chem. Lett. 36 (2025) 110333.

X.L. Yin, P. Liu, X.C. Xu, et al., Sens. Actuator. B: Chem. 328 (2021) 129033.

W.Y. Mi, S. Tang, S.S. Guo, et al., Chin. Chem. Lett. 33 (2022) 1331–1336.

E.L.S. Wong, K.Q. Vuong, E. Chow, Sensors 21 (2021) 408.

Y.F. Huang, L. Zhang, L. Ma, et al., Catal. Lett. 150 (2020) 815–825.

Y.X. Xing, L.P. Sun, K. Liu, et al., Anal. Bioanal. Chem. 414 (2022) 5857–5867.

D. Rosa-Gastaldo, M. Pupier, G. Meshvildishvili, et al., Nanoscale 15 (2023) 6838–6843.

L.H. Jin, Z. Meng, Y.Q. Zhang, et al., ACS Appl. Mater. Interfaces 9 (2017) 10027–10033.

S.R. Bhattacharya, K. Bhattacharya, V.J. Xavier, et al., ACS Appl. Mater. Interfaces (2022) 29521–29536.

H.D. Cui, D.H. Hu, J.N. Zhang, et al., Chin. Chem. Lett. 28 (2017) 1391–1398.

J.F. Qiu, F. Ahmad, J.X. Ma, et al., Anal. Bioanal. Chem. 416 (2024) 3923–3944.

M. Gharib, A.J. Yates, S. Sanders, et al., Adv. Opt. Mater. 12 (2024) 2302833.

A.L. Feng, Q.Y. Jiang, G.G. Song, et al., Chin. J. Anal. Chem. 50 (2022) 100118.

J.F. Zou, W.W. Fei, Y. Qiao, et al., Chin. Chem. Lett. 34 (2023) 107660.

S.S. Zheng, H.Z. Gu, D.Y. Yin, et al., Colloid Surf. A: Physicochem. Eng. Asp. 589 (2020) 124444.

Y.C. Gao, C. Wang, C.X. Zhang, et al., J. Mater. Sci. Technol. 109 (2022) 140–146.

J.J. Zhang, Z.T. Huang, Y.Z.Y. Xie, et al., Chem. Sci. 13 (2022) 1080–1087.

Y. Song, L.H. Wang, J.Y. Zhao, et al., Int. Dairy J. 128 (2022) 105318.

Z.J. Chen, J.Q. Liu, W.Y. Wang, et al., Microchim. Acta 192 (2025) 295.

F.Y. Sun, Y.Y. Liang, L.H. Jin, et al., ACS Appl. Mater. Interfaces 13 (2021) 58209–58219.

M.N. Dou, Y.F. Wu, J.X. Du, J. Chin. Chem. Soc. 69 (2022) 1765–1771.

Y.M. Geng, S.Z. Zhang, Y.X. Wang, et al., Microchem. J. 165 (2021) 106145.

Y.Y. Liang, F.Y. Sun, S.H. Qu, et al., Sens. Actuator. B: Chem. 417 (2024) 136069.

K.J. Franz, Dalton Trans. 41 (2012) 6333–6334.

R.R. Amirov, A.E. Mingazova, A.B. Ziyatdinova, et al., Russ. Chem. Bull. 63 (2014) 662–672.

Q. Zhao, L.Y. Chen, A.L. Cai, et al., Sens. Actuator. B: Chem. 400 (2024) 134893.

A. Kim, C.J. Zeng, M. Zhou, et al., Part. Part. Syst. Charact. 34 (2017) 1600388.

Q.Y. Zhang, X.Z. Xu, Q. Yang, et al., Colloid Surf. B: Biointerfaces 222 (2023) 113091.

M. Feng, S. Werner, B. Qi, et al., Nano Today 65 (2025) 102819.

N.K. Ivanova, E.A. Karpushkin, L.I. Lopatina, et al., Mendeleev Commun. 33 (2023) 346–348.

S.M. Shakouri, E. Bagherzadeh-Khajehmarjan, S. Ahmadi-Kandjani, Phys. Scr. 94 (2019) 055503.

T.H. Huang, F.Z. Zhao, Q.L. Hu, et al., Inorg. Chem. 59 (2020) 16027–16034.

Z.H. Zhang, Y. Dai, X. Zhang, et al., Sens. Actuator. B: Chem. 418 (2024) 136239.

X. Zhang, G.C. Li, J.Q. Yin, et al., Nano Lett. 24 (2024) 9104–9114.

H.Y. Wang, B.Q. Zhang, J. Wang, et al., Small 21 (2025) 2504399.

F.Q. Liu, Y.B. Liu, A.F. Yao, et al., Environ. Sci. Technol. 54 (2020) 5913–5921.

Y.J. Han, X. Ren, T.T. Wu, et al., Angew. Chem. Int. Ed. 64 (2025) e202414073.

F. Chen, L. Xie, T. Deng, et al., Microchim. Acta 191 (2024) 511.

A. Bagheri, D.M. Boghaei, M. Monajjemi, Main Group Met. Chem. 31 (2008) 81–91.

Y. Jinsmaa, P. Sullivan, D. Gross, et al., Neurosci. Lett. 569 (2014) 27–32.

K.S. Rajan, A.A. Manian, J.M. Davis, et al., Brain Res. 107 (1976) 317–331.

O.V. Zalomaeva, V.Y. Evtushok, I.D. Ivanchikova, et al., Inorg. Chem. 59 (2020) 10634–10649.

J.J. Chen, H.J. Gao, Z.H. Li, et al., Chin. Chem. Lett. 31 (2020) 1398–1401.

K. Aneesh, C.S.R. Vusa, S. Berchmans, Anal. Bioanal. Chem. 408 (2016) 6213–6221.

Q.F. Yao, Z.N. Wu, Z.H. Liu, et al., Chem. Sci. 12 (2021) 99–127.

Y.Y. Zhou, Phys. B 322 (2002) 61–67.

N.R. Perron, J.L. Brumaghim, Cell Biochem. Biophys. 53 (2009) 75–100.

Q. Xue, Z.P. Wang, S.J. Han, et al., J. Mater. Chem. A 10 (2022) 8371–8377.

G.D. Fang, Y.M. Deng, M. Huang, et al., Environ. Sci. Technol. 52 (2018) 2178–2185.

J.H. Cong, Y.J. Luo, X.H. Qi, et al., Spectrosc. Spectr. Anal. 42 (2022) 483–489.

N. Amini, M. Shamsipur, Int. J. Biol. Macromol. 123 (2019) 677–681.

S.G. Huling, S. Hwang, D. Fine, et al., Water Res. 45 (2011) 5334–5342.

N. Alizadeh, A. Salimi, T.K. Sham, et al., Chem. Eng. J. 417 (2021) 129134.

Appendix

Less

Year 2026 volume 37 Issue 1

PDF

Cite this Article

BibTeX

Article Info

doi: 10.1016/j.cclet.2025.111806

Receive Date：2025-06-29
Online Date：2026-10-29
Published：2026-01-15

Article Data

Affiliations

History

Received：2025-06-29
Revised：2025-08-29
Accepted：2025-09-08

Affiliations

^aState Key Laboratory of Heavy Oil Processing, College of Chemical Engineering, China University of Petroleum (East China), Qingdao 266580, China

^bDepartment of Cardiology, the Affiliated Hospital of Qingdao University, Qingdao 266003, China

Corresponding:

E-mail addresses: fhuang@upc.edu.cn (F. Huang)

xwang@upc.edu.cn (X. Wang)

References

Share

https://castjournals.cast.org.cn/joweb/ccl/EN/10.1016/j.cclet.2025.111806

Share to

Scan QR to access full text

Cite this article

BibTeX

Citations

表12种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT

Fig.1 (A) Schema of chelation of DpCDp with Fe²⁺. (B) Job's plot indicating the binding ratio between DpCDp and Fe²⁺. (C) Schematic diagram of Dp-AuNC. (D) TEM image of Dp-AuNCs. Inset: high-resolution TEM image showing lattice fringes. (E) Three-dimensional fluorescence spectrum of Dp-AuNCs. (F) UV–vis absorption spectra of Dp-AuNCs, GSH (0.6 mmol/L) and DpCDp (0.16 mmol/L).

Fig.2 (A) Schematic illustration of Dp-AuNCs chelating Fe²⁺. (B) TEM-based particle size distributions demonstrating the size increase from Dp-AuNCs to Dp-AuNCs@Fe²⁺ upon Fe²⁺-mediated assembly. (C) TEM image of Dp-AuNCs@Fe²⁺ assemblies. (D) High-resolution TEM image of Dp-AuNCs@Fe²⁺ nanoassemblies. (E) UV–vis absorption spectra and photograph showing the color change of Dp-AuNCs before and after chelation with Fe²⁺ (25 µmol/L).

Fig.3 (A) UV–vis absorption spectra of different reaction components. The concentrations of TMB, H₂O₂, Dp-AuNCs, Fe²⁺ and Dp-AuNCs@Fe²⁺are 3.0 mmol/L, 2.0 mmol/L, 98 µg/mL, 5.0 µmol/L and 100 µg/mL, respectively. (B) Photographs of the reaction mixtures under daylight (Ⅰ: TMB, Ⅱ: TMB + H₂O₂, Ⅲ: TMB + Dp-AuNCs, Ⅳ: TMB + Dp-AuNCs@Fe²⁺, Ⅴ: TMB + H₂O₂ + Dp-AuNCs, Ⅵ: TMB + H₂O₂ + Fe²⁺, Ⅶ: TMB + H₂O₂ + Dp-AuNCs@Fe²⁺). (C) Comparison of catalytic activities of Dp-AuNCs@Fe²⁺ at varying Fe²⁺ chelation concentrations, with those of Dp-AuNCs alone and Fe²⁺ alone at corresponding concentrations. (D) Catalytic activities of Dp-AuNCs coordinated with various metal ions, showing the highest activity for Fe²⁺-bound assemblies. (E) Catalytic stability of Dp-AuNCs@Fe²⁺ over a period of 0–30 days. (F) Calibration curves of Dp-AuNCs and Dp-AuNCs@Fe²⁺ for H₂O₂ detection in the range of 0–200 µmol/L.

Fig.4 (A) Schematic diagram of electron transfer process between DpCDp-enhanced Dp-AuNCs and Fe²⁺. (B) Fluorescence intensity at 600 nm of GSH-AuNCs and Dp-AuNCs mixed with Fe²⁺(25 µmol/L). (Ex = 404 nm). (C) Time-resolved fluorescence lifetime decay spectra of Dp-AuNCs after addition of Fe²⁺ (25 µmol/L). (D) XPS binding energy changes of Dp-AuNCs chelating Fe²⁺(25 µmol/L). (E) Fluorescence intensity changes of Dp-AuNCs and Dp-AuNCs@Fe²⁺ after treatment with H₂O₂ (2.0 mmol/L) and with a mixture of H₂O₂ (2.0 mmol/L) and TMB (3.0 mmol/L). (F, G) Cyclic voltammetry (CV) curves of (F) Dp-AuNCs and (G) Dp-AuNCs@Fe²⁺ in the presence and absence of H₂O₂. (H) Michaelis−Menten kinetic analysis of Dp-AuNCs and Dp-AuNCs@Fe²⁺ toward H₂O₂. (I) EPR spectroscopy for the detection of ·OH generated by Dp-AuNCs and Dp-AuNCs@Fe²⁺.

Articles: Latest Articles; Most Read; Collections

Updates: Events; News; Multimedia

About: About Us

Contact

No. 86 Xueyuan South Road, Haidian District, Beijing

100081

010-62662699(Operation and Technical Support)

qkjq@cast.org.cn

Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House