Reconciling the development of a sustainable, global-scale energy system concurrently with the preservation of the environment stands as one of the most critical challenges facing humanity. To date, over 80% of the energy resources supporting modern society stems from traditional fossil fuels [
1–
3]. Therefore, leveraging renewable energy sources, including solar, wind, marine, and hydroelectric power for electrochemical energy conversion and storage represents a promising approach to achieving energy sustainability [
4–
13]. In this context, clean energy storage and conversion technologies, such as hydrogen production
via water electrolysis, various rechargeable battery systems, and fuel cells have attracted significant research interest [
14–
20]. Hydrogen and oxygen evolution reactions (HER and OER) are crucial electrokinetic processes for hydrogen production. Likewise, efficient oxygen reduction and evolution reactions (ORR and OER) are essential for the renewable energy sector, especially in the development of fuel cells and rechargeable batteries [
21,
22]. Thus, the development of catalytic system with high stability and enhanced performance for HER, OER and ORR are vital for the aforementioned energy storage and conversion systems.
In the past ten years, transition-metal phosphides (TMPs) have received considerable attention for their applications in electrocatalysis due to their outstanding physicochemical properties, including good conductivity and high catalytic activities [
23,
24,
25–
32]. However, achieving metal phosphides with stable crystal structure requires prolonged high-temperature pyrolysis (≥2 h) under the inert atmosphere, which is not only time-consuming and energy-intensive but also escalates production costs. Furthermore, the extended high-temperature calcination process generates substantial CO
2 emissions. These factors contribute to increased production costs. Additionally, the toxic phosphine gas (PH
3) generated during traditional calcination can cause severe air pollution. Similarly, the dissolution-thermal method produces phosphorus-containing wastewater and organic solvent emissions, imposing supplementary economic and environmental burdens. More importantly, traditional methods often result in large particle sizes as well as agglomeration, ultimately resulting in a decline in electrochemical performance. Therefore, it is highly desirable to explore rapid synthetic approaches that enable the production of nano-sized TMP particles with enhanced surface area at lower pyrolysis temperatures and ambient air conditions. Fortunately, ultrafast carbothermal shock (UCS) synthesis allows for rapid flash heating and cooling, with ramp rates reaching up to 10
5 K/s. This instantaneous temperature fluctuation allows reactions to complete within few seconds [
33–
36]. The total energy consumption is significantly reduced. On the other hand, UCS holds significant potential for continuous production, leading to lower long-term operating costs and reduced per-unit production costs as scale increases. Additionally, the low energy consumption of UCS effectively decreases carbon emissions, aligning with the principles of green manufacturing. More importantly, the optimized second-level calcination time effectively mitigates sintering and agglomeration of active components that could result from prolonged heat treatment, thereby ensuring the rapid and uniform dispersion of active atoms. This enhancement facilitates precise control over the particle size and structure of the synthesized materials.
Herein, we have successfully demonstrated an ultrafast (≤15 s), energy-saving synthesis of a series of TMPs, including Rh2P, Ir2P, Pd5P2, RuP, and PtP2, using UCS under ambient air atmosphere. Characterization results indicate that these TMPs comprise of ultrasmall nanoparticles with controllable sizes and well-defined crystalline structures, with enhanced HER activity and stability. For example, the as obtained Rh2P exhibits platinum-like HER activity with overpotentials of 13 and 70 mV at a current density of 10 and 100 mA/cm2 in 0.5 mol/L H2SO4, respectively. Such high HER activities not only surpass most reported electrocatalysts based on precious-metal phosphides, but also compared favorably to commercial Pt/C materials. Therefore, this study presents a pioneering approach to fabricating TMPs in seconds by UCS under ambient air conditions with enhanced HER performance.
The UCS synthesis process for these TMPs nanoparticles is schematically illustrated in
Fig. 1a. Initially, a homogeneous mixture of metal salts and NH
4H
2PO
2 was prepared. Subsequently, the obtained precursor mixture was subjected to UCS under air atmosphere. Following cooling, the byproduct was extensively rinsed with deionized water to obtain the final sample. Notably, the UCS strategy enables the synthesis of various TMPs, including Rh
2P, Ir
2P, Pd
5P
2, RuP, and PtP
2 (
Fig. 1b). For comparison, Rh
2P-T was also prepared
via the calcination process in a tube furnace. As shown in Fig. S1a (Supporting information), the XRD pattern confirming the Rh
2P-T has been successfully obtained. Furthermore, TEM images show that Rh
2P-T exhibits a bulk morphology (Figs. S1b, c and S2 in Supporting information).
Powder X-ray diffraction (XRD) was used to investigate the crystallographic structure of Rh
2P, Ir
2P, Pd
5P
2, RuP, and PtP
2. As displayed in
Figs. 2a, d, g, j and m, the diffraction patterns of Rh
2P, Ir
2P, Pd
5P
2, RuP, and PtP
2 match well with their standard PDF cards [
37,
38]. The structural features of Rh
2P, Ir
2P, Pd
5P
2, RuP, and PtP
2 are revealed by TEM (
Figs. 2b, c, e, f, h, i, k, l, n and o). The TEM images in
Figs. 2b and h indicate that Rh
2P and RuP are composed of small nanocrystals. The Ir
2P shows a nanosphere morphology with particle size ranges from 8 nm to 25 nm (
Fig. 2e and Fig. S3 in Supporting information), while both Pd
5P
2 and PtP
2 possess a typical nanoparticles structure with particle size of ~2 and 20 nm, respectively (
Figs. 2k and n, Fig. S3). Additionally, the high-resolution TEM (HRTEM) images reveal the lattice fringe spacing of Rh
2P, Ir
2P, RuP, Pd
5P
2 and PtP
2 to be 0.195, 0.278, 0.306, 0.228 and 0.285 nm, corresponding to cubic Rh
2P (220), cubic Ir
2P (200), orthorhombic RuP (200), monoclinic Pd
5P
2 (113) and cubic PtP
2 (200) crystal planes (
Figs. 2c, f, i, l and o), respectively.
The energy dispersive X-ray (EDX) spectrum (Fig. S4 in Supporting information) confirms the presence of Rh and P in the Rh
2P nanoparticle, with an atomic ratio of Rh and P approaching 2:1. Furthermore, the HAADF-STEM and energy-dispersive X-ray spectroscopy (EDS) elemental mapping demonstrate homogeneous distribution of both Rh and P elements within the Rh
2P nanoparticle (
Figs. 3a-d). These results demonstrate that the UCS process is energy-efficient and time-saving for fabricating a series of uniformly dispersed TMPs under an air atmosphere.
XPS was employed to further examine the elemental composition and surface chemical state of Rh
2P. The results indicate that the surface of Rh
2P is predominantly composed of C, O, Rh and P (Fig. S5 in Supporting information). The presence of elemental C and O can be assigned to the absorption of CO
2, H
2O, O
2, or slight surface oxidation of Rh
2P potentially caused by exposure to air. The XPS spectrum of the Rh 3d region exhibits two peaks at binding energies (BE) of 312.6 and 307.8 eV, corresponding to the Rh 3d
3/2 and Rh 3d
5/2 states of Rh
2P (
Fig. 3e), respectively. In addition, the P 2p spectrum displays three distinct subpeaks at 133.9, 131.2 and 130.1 eV (
Fig. 3f). The peaks observed at 131.2 and 130.1 eV can be attributed to the Rh-P bond, whereas the peak at 133.9 eV is indicative of oxidized phosphorus species. Notably, the Rh 3d
5/2 peak is blue-shifted by 0.5 eV relative to the metal Rh (307.3 eV) [
39], while the P 2p
3/2 peak is red-shifted compared to elemental P (130.2 eV) [
40]. These observations indicate the presence of a partial positive charge (
δ+) on Rh and a partial negative charge (
δ−) on P in Rh
2P, suggesting a weak electron transfer from Rh to P. The positively charged Rh atom serve as the hydride-acceptor center, while the negatively charged P atom functions as the proton-acceptor center. This dual functionality modulates the attachment and detachment of hydrogen atoms at the active sites during the subsequent HER process.
The HER activity of the obtained samples (Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2) were examined in 0.5 mol/L H
2SO
4 electrolytes, with all potentials calibrated using an RHE as the reference scale. Before conducting the HER tests, the obtained samples were activated by performing a series of linear sweep voltammetry (LSV) scans ranging from 0 to −0.5 V
vs. Ag/AgCl.
Fig. 4a illustrates the
iR-corrected (the internal resistance determined through EIS analysis in Fig. S6 in Supporting information) HER polarization curves of Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2. All the samples (Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2) obtained
via UCS exhibits good HER catalytic activities with an onset potential close to 0 mV. Specifically, the overpotentials needed for Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2 to achieve a cathodic current density of 10 mA/cm
2 are 13, 20, 37, 30 and 84 mV (
Fig. 4b), respectively. More importantly, the catalytic activity of Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2 is comparable to that of recently reported Rh/Pt/Ir/Ru/Pd-based TMPs synthesized by traditional methods, such as Rh
2P obtained by solution-phase reaction (14 mV@10 mA/cm
2) [
41], PtP
2@NPC synthesized by high-temperature pyrolysis of mixtures of PtCl
4 with phytic acid under an ammonia atmosphere (320 mV@10 mA/cm
2) [
42], Ir
2P-decorated Ru
2P hollow nanotubes
via an anion/cation-exchange strategy (23.2 mV@10 mA/cm
2) [
43], RuP
2@NPC obtained by thermal treatment (38 mV@10 mA/cm
2) [
44], Pd
5P
2@NPGC synthesized by traditional pyrolysis (104 mV@10 mA/cm
2) [
45]. This observation suggests the superiority of UCS over conventional methods in preparing TMPs. Tafel slope is another critical parameter for assessing the HER activity of electrocatalysts. The Tafel slopes obtained from the linear region of the Tafel plots for of Rh
2P, PtP
2, Ir
2P, RuP and Pd
5P
2 are 30, 49, 51, 70 and 110 mV/dec (
Fig. 4c), respectively. Similarly, these Tafel values are comparable to those reported for Pt-group TMPs synthesized using conventional ways [
41–
45]. Furthermore, taking Rh
2P as the research object, based on its Tafel value, it can be inferred that the hydrogen generation process of Rh
2P in acidic solutions likely follows the Volmer-Tafel mechanism, and the rate-determining step (RDS) is governed by the Tafel step: 2M-H
ad → H
2 + 2M, where M denotes the active site and H
ad represents the adsorbed hydrogen intermediate [
46,
47]. To the best of our knowledge, the high HER activity of these samples compares favorably with that of most TMPs synthesized by traditional methods (such as pyrolysis at high temperature in inert atmosphere or solution synthesis in organic solvents) reported in acidic electrolytes (
Fig. 4d and Table S2 in Supporting information).
Based on the superior HER activity demonstrated by Rh
2P, we conducted an in-depth investigation into its long-term stability.
Fig. 4e presents the polarization curves obtained before and after 1000 cyclic voltammetry (CV) cycles at 5 mV/s. It is worth noting that the LSV curves of Rh
2P exhibited minimal degradation even after undergoing 1000 CV potential cycles. Furthermore, the long-term stability of the Rh
2P electrocatalyst is evaluated through continuous electrolysis at a fixed overpotential of ~20 mV without iR correction. As shown in
Fig. 4f, the current density of Rh
2P demonstrates negligible degradation under acidic conditions over 20 h electrolysis period, highlighting the exceptional durability of the synthesized Rh
2P. Additionally, the XRD analysis of both the fresh and post-HER Rh
2P materials (Fig. S7 in Supporting information) confirms the similarity in their crystal structures. Furthermore, inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis revealed that rhodium exhibited minimal leaching (6%) in the electrolyte during prolonged stability testing. This limited leaching may be attributed to the partial desorption of powder electrocatalysts from the electrode surfaces due to vigorous gas evolution during the HER [
48]. These resulting offering robust evidence for the retention of the Rh
2P composition and its remarkable durability under acidic media during HER.
More significantly, Rh2P exhibits excellent HER performance under both alkaline (1.0 mol/L KOH) and neutral (1.0 mol/L PBS) conditions, requiring overpotentials of 70 and 97 mV, respectively, to achieve a current density of 10 mA/cm2 (Fig. S8 in Supporting information). Additionally, it exhibits stable performance with operation durations of 8 h in neutral electrolytes (1.0 mol/L PBS) and 11 h in alkaline electrolytes (1.0 mol/L KOH) (Fig. S9 in Supporting information). Therefore, these comprehensive analyses demonstrate that Rh2P is an excellent and durable catalyst material for HER in a wide pH range.
In conclusion, we have developed a facile, energy efficient, and ultrafast carbothermal shock method capable of synthesizing TMPs within 15 s under ambient air conditions. The versatility of this technique was validated through the successful synthesis of various TMPs, including Rh2P, PtP2, Ir2P, Pd5P2, RuP and PtP2. Electrochemical measurements confirmed that all samples exhibited high HER catalytic activity, with overpotential of 13, 20, 37, 30 and 84 mV for Rh2P, PtP2, Ir2P, RuP and Pd5P2 required to achieve cathodic current densities of 10 mA/cm2. This outstanding HER activity rivals that of state-of-the-art phosphides based on Pt-group metals, which are typically synthesized through conventional solid-state or solution-phase methods. Consequently, the ultrafast carbothermal shock synthesis of TMPs under ambient air conditions shows significant potential for advancing the development of TMP-based electrocatalysts for energy-related applications.
PDF
Full
88
49
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62662699(Operation and Technical Support)
qkjq@cast.org.cn
