收藏切换
Numerical Analysis on Influence of Preset Bubble in a Fluid-filled Structure on the Characteristics of Projectile Penetration and Structural Failure
收藏切换
PDF
Meng-meng WUa, b, Hai-liang HOUa, Dian LIa, Yong-qing LIa, Wei-xue XIAb, Shao-hong YANGb
Journal of Ship Mechanics | 2025, 29(6) : 924 - 940
Less
收藏切换
Journal of Ship Mechanics | 2025, 29(6): 924-940
Structural Mechanics
Numerical Analysis on Influence of Preset Bubble in a Fluid-filled Structure on the Characteristics of Projectile Penetration and Structural Failure
Full
Meng-meng WUa, b, Hai-liang HOUa, Dian LIa, Yong-qing LIa, Wei-xue XIAb, Shao-hong YANGb
Affiliations
Published: 2025-06-20 doi: 10.3969/j.issn.1007-7294.2025.06.007
Outline
收藏切换

In this paper, the failure caused by HRAM loads which were generated by high-speed projectile penetration, and protection technology of the fluid-filled structure were explored. A bubble was preset on the projectile trajectory in a fluid-filled structure. Based on the reflection and transmission phenomena of pressure waves at the gas-liquid interface and the compressibility characteristics of gases, a numerical analysis was conducted on the influence of preset bubble on projectile penetration and structural failure characteristics. The results indicate that the secondary water-entry impact phenomenon occurs when a preset bubble exists on the projectile trajectory, leading to the secondary water entry impact loads. The rarefaction waves reflected on the surface of the preset bubble cause the attenuation ratio of the initial impact pressure peak to reach 68.8% and the total specific impulse attenuation ratio to reach 48.6%. Furthermore, the larger the bubble, the faster the projectile, and the more obvious the attenuation effect. Moreover, due to the compressibility of the bubble, the global deformation attenuation ratio of the front and rear walls can reach over 80%. However, the larger the bubble size, the faster the projectile velocity, the smaller the local deformation attenuation effect of the rear wall, and the more severe the failure at the perforation of the rear wall.

fluid-filled structure  /  preset bubble  /  HRAM loads  /  projectile  /  penetration  /  attenuation
Meng-meng WU, Hai-liang HOU, Dian LI, Yong-qing LI, Wei-xue XIA, Shao-hong YANG. Numerical Analysis on Influence of Preset Bubble in a Fluid-filled Structure on the Characteristics of Projectile Penetration and Structural Failure[J]. Journal of Ship Mechanics, 2025 , 29 (6) : 924 -940 . DOI: 10.3969/j.issn.1007-7294.2025.06.007
  • National Natural Science Foundation of China(52271338; 51979277; 52371342; 12102475)
Year 2025 volume 29 Issue 6
PDF
79
34
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1007-7294.2025.06.007
  • Receive Date:2024-12-24
  • Online Date:2026-03-24
  • Published:2025-06-20
Article Data
Affiliations
History
  • Received:2024-12-24
Funding
National Natural Science Foundation of China(52271338; 51979277; 52371342; 12102475)
Affiliations

Corresponding:

corresponding author, E-mail:
References
Share
https://castjournals.cast.org.cn/joweb/cblx/EN/10.3969/j.issn.1007-7294.2025.06.007
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT