收藏切换
Experimental study on non-shock initiation reaction characteristics of CL-20-based PBX explosive charge considering constraint conditions
收藏切换
Jiamin WANG1, Xiao LI2, Kuiguang YAO2, Pengwan CHEN1, Shuji WANG1, Rui LIU1
Explosion and Shock Waves | 2026, 46(9) : 092301-1 - 092301-11
Less
收藏切换
Explosion and Shock Waves | 2026, 46(9): 092301-1-092301-11
• Explosion Physics •
Experimental study on non-shock initiation reaction characteristics of CL-20-based PBX explosive charge considering constraint conditions
Full
Jiamin WANG1, Xiao LI2, Kuiguang YAO2, Pengwan CHEN1, Shuji WANG1, Rui LIU1
Affiliations
  • 1State Key Laboratory of Explosion Science and Safety Protection, Beijing Institute of Technology, Beijing 100081, China
  • 2Institute of Chemical Materials, CAEP, Mianyang 621999, Sichuan, China
Published: 2026-09-05 doi: 10.11883/bzycj-2025-0053
Outline
收藏切换

In order to study the influence of constraint conditions on the non-shock ignition reaction process of CL-20-based polymer bonded explosive (PBX) explosives, an ignition test device with adjustable mechanical constraints was used to study the reaction evolution behavior of PBX explosives under different constraints. Based on the high-speed camera image and the recovered shell wreckage, the influence of constraint conditions on the reaction rate and reaction intensity of the charge was analyzed respectively. The pressure change in the process of charge reaction was recorded by pressure sensor, and the evolution behavior of non-shock ignition reaction of explosive was analyzed. The overpressure time history of air shock wave at different positions was measured by overpressure sensor, and the detonation test of PBX was carried out. Based on the overpressure peak at the same position of the two types of tests, the relationship between constraint conditions and charge reactivity was further analyzed. The results show that weakening the mechanical constraint strength can reduce the reaction rate and the reaction intensity of the explosive. According to the pressure growth rate, the non-shock ignition reaction process under the constraint condition is divided into two stages. As the constraint strength increases, the distinction between the two reaction stages is gradually not obvious, and the first stage quickly transitions to the second stage. The parameters determined in the calculation formula of detonation overpressure peak of CL-20-based PBX explosive are A = 0.289, B = 1.041, and C = 2.224. The constraint conditions have a significant effect on the reactivity of the explosive charge. When the shell thickness is 6mm and the strength of the constraint plate is 2 MPa and 50 MPa, the reactivity of the explosive is 0.11 and 0.14, respectively. When the shell thickness is 20 mm and the strength of the constraint plate is 2 MPa, the charge reactivity is 0.31. It can be seen that the reaction intensity of CL-20-based PBX explosive can be effectively reduced by weakening the mechanical constraint strength.

CL-20  /  explosive charge  /  constraint conditions  /  pressure evolution  /  reaction characteristics
王佳敏, 李晓, 姚奎光, 陈鹏万, 王书记, 刘睿. 考虑约束条件的CL-20基PBX炸药装药非冲击点火反应特性. 爆炸与冲击, 2026 , 46 (9) : 092301-1 -092301-11 . DOI: 10.11883/bzycj-2025-0053
Jiamin WANG, Xiao LI, Kuiguang YAO, Pengwan CHEN, Shuji WANG, Rui LIU. Experimental study on non-shock initiation reaction characteristics of CL-20-based PBX explosive charge considering constraint conditions[J]. Explosion and Shock Waves, 2026 , 46 (9) : 092301-1 -092301-11 . DOI: 10.11883/bzycj-2025-0053
Year 2026 volume 46 Issue 9
147
70
Cite this Article
BibTeX
Article Info
doi: 10.11883/bzycj-2025-0053
  • Receive Date:2025-02-19
  • Online Date:2026-10-10
  • Published:2026-09-05
Article Data
Affiliations
History
  • Received:2025-02-19
  • Revised:2025-04-14
Affiliations
    1State Key Laboratory of Explosion Science and Safety Protection, Beijing Institute of Technology, Beijing 100081, China
    2Institute of Chemical Materials, CAEP, Mianyang 621999, Sichuan, China
References
Share
https://castjournals.cast.org.cn/joweb/bzycj/EN/10.11883/bzycj-2025-0053
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT