PDF
Full
Outline
To control the height and recoil distance of a frame-shear wall structure after demolition by blasting, a frame-shear wall residential building demolition project in Qingdao was chosen as the subject. The simulation analysis used ANSYS/LS-DYNA software and the orthogonal combination of collapse angle and crotch extension time difference. Firstly, a finite element model of the original scheme was built, and the model's validity was checked by comparing the variance between the model prediction and actual outcomes. Then, the trends of the structure recoil distance and burst pile height with the change were analyzed by changing simply the model's inter-span extension time difference and cut height. Furthermore, the semi-quantitative formulas for the relationships between recoil distance and burst height with notch height and inter-span delay time difference were proposed based on the outcomes of multi-scenario numerical simulation, which were allowed for the determination of the inter-span delay time difference and notch height for the cases of minimum structural recoil distance and burst height, respectively. Finally, the analysis was carried out on the acceptable span-to-span extension time difference and the range of blasting notch heights for demolition blasting of frame-shear wall structures. The results show four fundamental steps to the collapse of frameshear wall structures: blast notch creation, destabilized overturning, notch closure, and landing collapse. The study's findings indicate that the recoil distance of each model primarily increases at first and then decreases as the interspan extension of the blast section is prolonged at the same cut height. Meanwhile, there is a more significant disparity in the structure's recoil distance as the deferred time difference is extended, and the recoil distance increases with the height of the blast cut at the same inter-span extension. Additionally, the height of the detonation pile roughly decreases as the time lag increases. The shear walls simultaneously improve the structural integrity and prevent the building from collapsing during the collapse, resulting in better structural integrity after collapse. The structure reduces recoil distance when employing a short incision height and a 200 ms extension time difference. The most minor burst heights of the structures are those with considerable notch heights and a 300 ms delay time difference. A crotch delay time difference of between 270 and 420 milliseconds is adequate. More importantly, a large blast cut can lower the pile's height, while a tiny blast cut can effectively regulate the recoil. It can be reasonably chosen based on the demands of the area around the structure that will be torn down. The study can provide a guide for determining the incision height and delay time difference for demolishing frame-shear wall structures by blasting.
PDF
125
53
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |
关闭全屏
No. 86 Xueyuan South Road, Haidian District, Beijing
010-62199257
qkjq@cast.org.cn
Copyright © 2025 China Association for Science and Technology. All rights reserved. For all open access content, the relevant licensing terms apply.
Sponsored by the Office of the Leading Group for Cybersecurity and Informatization of CAST, and supported by Science and Technology Review Publishing House
