收藏切换
Open-pit Blasting Technology Research on Super Deep Hole and Large Resistance Line
收藏切换
PDF
Yun-cheng CHEN, Shou-dong XIE, Shi-liu YAN, Tie-long LI
Blasting | 2023, 40(1) : 62 - 68
Less
收藏切换
Blasting | 2023, 40(1): 62-68
BLASTING IN ORE AND ROCK
Open-pit Blasting Technology Research on Super Deep Hole and Large Resistance Line
Full
Yun-cheng CHEN, Shou-dong XIE, Shi-liu YAN, Tie-long LI
Affiliations
  • Hongda Blasting Engineering Group Co, Ltd, Guangzhou 510000, China
Published: 2023-03-01 doi: 10.3963/j.issn.1001-487X.2023.01.009
Outline
收藏切换

There was a special working face with an ultra-high bench and a large resistance at the 410 platform of a mine in Qingyuan city, which required one-time blasting. This working face had a bench height of 30m, a length of 80 m, and a face angle of 45°~80°. Due to the large bench height, small face angle, and the different face angles of the upper and lower parts, it was difficult to conduct the blasting construction. Before blasting design, the RTK measuring instrument and total station were used to measure the topography of the detailed working face, and then calculate the slope angle of each position of the face according to the topographic map. According to the rock properties, the construction experience and the drilling rig type, the powder factor and blast hole diameter were determined. Based on the above results, the toe burden, drilling angle, depth and spacing of the first row of blast holes were then deigned. Similarly, the burden, drilling angle, depth, spacing of the following rows of holes were also determined. After the hole parameters were determined, the charging structure was designed according to the burden of each row of holes, the rock volume of each hole, powder factor, and the principle of uniform blasting action. Finally, the initiation network was designed by the software of 3Dmine based on the direction of rock movement and the earthquake-proof requirements of the protected objects. During the construction process, the key links such as hole layout, hole depth measurement, drilling, charging, and network connection were strictly controlled, and positive results were obtained after blasting.

high bench  /  large resistance line  /  variable face angle  /  blasting design
Yun-cheng CHEN, Shou-dong XIE, Shi-liu YAN, Tie-long LI. Open-pit Blasting Technology Research on Super Deep Hole and Large Resistance Line[J]. Blasting, 2023 , 40 (1) : 62 -68 . DOI: 10.3963/j.issn.1001-487X.2023.01.009
Year 2023 volume 40 Issue 1
PDF
130
61
Cite this Article
BibTeX
Article Info
doi: 10.3963/j.issn.1001-487X.2023.01.009
  • Receive Date:2022-09-19
  • Online Date:2026-03-19
  • Published:2023-03-01
Article Data
Affiliations
History
  • Received:2022-09-19
Affiliations
    Hongda Blasting Engineering Group Co, Ltd, Guangzhou 510000, China
References
Share
https://castjournals.cast.org.cn/joweb/bp/EN/10.3963/j.issn.1001-487X.2023.01.009
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT