收藏切换
Bench Blasting Parameters Optimization with Air-decked Charge Structure based on Fragmentation Control
收藏切换
PDF
Hai-wang YE1a, 1b, 1c, Meng-hao YU1a, Cong LIU2, Jia-tao CHEN2, Fa-ming ZHOU2, Hao WANG2, Bao-zhong YANG2, Tao LEI1a, 1b, 1c
Blasting | 2024, 41(4) : 84 - 90
Less
收藏切换
Blasting | 2024, 41(4): 84-90
BLASTING IN ORE AND ROCK
Bench Blasting Parameters Optimization with Air-decked Charge Structure based on Fragmentation Control
Full
Hai-wang YE1a, 1b, 1c, Meng-hao YU1a, Cong LIU2, Jia-tao CHEN2, Fa-ming ZHOU2, Hao WANG2, Bao-zhong YANG2, Tao LEI1a, 1b, 1c
Affiliations
  • 1a.School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China
  • 1b.Ministry of Education Key Laboratory of Key Non-metallic Mineral Resources Green Utilization, Wuhan University of Technology, Wuhan 430070, China
  • 1c.Hubei Key Laboratory of Mineral Resources Processing and Environment, Wuhan University of Technology, Wuhan 430070, China
  • 2.Chuzhou Langyashan Mining Engineering Technology Co., Ltd., Chuzhou 239000, China
Published: 2024-12-01 doi: 10.3963/j.issn.1001-487X.2024.04.010
Outline
收藏切换

This study presents a comprehensive approach to solve the problem of low ore recovery caused by the difficulty in separating small-particle size ore from soil after blasting in a limestone building stone mine. Firstly, a correlation model between blasting fragmentation and dynamic damage of rock mass was established based on field measurement data and numerical simulation results, which can determine dynamic damage thresholds corresponding to various rock particle sizes. Secondly, the numerical simulation test of bench blasting in a three-dimensional fractured rock mass was carried out by using different air-decked charging stages and borehole distribution parameters, which can improve the particle size yield of 0.3~0.9 m and control the bulk ratio to obtain the best blasting parameters. Finally, the field blasting tests were conducted to optimize the charge structure and borehole distribution parameters based on numerical simulation results. The results show a negative exponential function relationship between the blasting block size and the dynamic damage value of the limestone. Specifically, the dynamic damage thresholds corresponding to the blasting size of 0.3 m and 0.9 m are 0.793 and 0.286, respectively. Using only an air-decked charging structure alone can increase the particle size ratio of 0.3~0.9 m and significantly raise the bulk rate. Conversely, combining an air-decked charging structure with a reduced hole spacing markedly enhances the particle size ratio of 0.3~0.9 m while maintaining a stable bulk rate. Optimal blasting results are achieved using a two-stage air interval charging structure and a strategic reduction in hole distribution parameters. The field application results show a 20.09 percentage point increase in the 0.3~0.9 m particle size ratio, with the bulk rate remaining virtually unchanged. Additionally, the unit consumption of explosives decreased by 10.29%.

blasting fragments  /  rock damage  /  air-decked charge  /  fractured rock mass  /  numerical simulation
Hai-wang YE, Meng-hao YU, Cong LIU, Jia-tao CHEN, Fa-ming ZHOU, Hao WANG, Bao-zhong YANG, Tao LEI. Bench Blasting Parameters Optimization with Air-decked Charge Structure based on Fragmentation Control[J]. Blasting, 2024 , 41 (4) : 84 -90 . DOI: 10.3963/j.issn.1001-487X.2024.04.010
  • National key research and development plan project(2020YFC1909602)
  • Hubei Province key research and development project(2021BCA152)
Year 2024 volume 41 Issue 4
PDF
79
35
Cite this Article
BibTeX
Article Info
doi: 10.3963/j.issn.1001-487X.2024.04.010
  • Receive Date:2024-05-21
  • Online Date:2026-03-19
  • Published:2024-12-01
Article Data
Affiliations
History
  • Received:2024-05-21
Funding
National key research and development plan project(2020YFC1909602)
Hubei Province key research and development project(2021BCA152)
Affiliations
    1a.School of Resources and Environmental Engineering, Wuhan University of Technology, Wuhan 430070, China
    1b.Ministry of Education Key Laboratory of Key Non-metallic Mineral Resources Green Utilization, Wuhan University of Technology, Wuhan 430070, China
    1c.Hubei Key Laboratory of Mineral Resources Processing and Environment, Wuhan University of Technology, Wuhan 430070, China
    2.Chuzhou Langyashan Mining Engineering Technology Co., Ltd., Chuzhou 239000, China

Corresponding:

LEI Tao (1983-), male Ph. D, lecturer, mainly engaged in mining, safety, numerical mining and other aspects of teaching and research, (E-mail) .
References
Share
https://castjournals.cast.org.cn/joweb/bp/EN/10.3963/j.issn.1001-487X.2024.04.010
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT