收藏切换
Development of Material Card for Stamping Simulation
收藏切换
PDF
Ya-nan Wang, Yan Liu, En-ze Liu, Lu Lu, Shi-wei Zhu, Bing-kun Jiang
Science & Technology of Baotou Steel | 2022, 48(5) : 39 - 42
Less
收藏切换
Science & Technology of Baotou Steel | 2022, 48(5): 39-42
Quality of Variety and Experiment and Research
Development of Material Card for Stamping Simulation
Full
Ya-nan Wang, Yan Liu, En-ze Liu, Lu Lu, Shi-wei Zhu, Bing-kun Jiang
Affiliations
  • Inner Mongolia Baotou Steel Rare Earth Steel Plate Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
Published: 2022-10-25
Outline
收藏切换

The accuracy of performance characterization for material has crucial influences on the numerical simulation results. In the software CAE, it generally contains the material cards of European mainstream material suppliers and a small number of domestic manufacturers, but due to different material characteristics of each manufacturer, the corresponding material card of material with the same grade shows different data distribution law as well as the criterion of yield and hardening. Thus, it is an indispensable link in such product applications as evaluation of stamping process as well as design and manufacture of mould to accurately characterize the characteristics of their own products and establish own material cards for material manufacturers. In the paper, the test scheme suitable for presenting cold stamping performance is established and data processing method is studied by taking the typical grade DC04 for cold stamping steel as the objective. Finally, the material data card for stamping simulation analysis which could accurately characterize product characteristics of Baotou Steel is developed. After adjust the working condition of stamping based on the calculation guidance of material data card, the stamping process suitable for performance characteristics of sheet matal of Baotou Steel is obtained to ensure the accuracy of simulation technology support and accurately improve the applicability of product.

stamping forming  /  material card  /  performance characterization  /  numerical simulation  /  AUTOFORM
Ya-nan Wang, Yan Liu, En-ze Liu, Lu Lu, Shi-wei Zhu, Bing-kun Jiang. Development of Material Card for Stamping Simulation[J]. Science & Technology of Baotou Steel, 2022 , 48 (5) : 39 -42 .
Year 2022 volume 48 Issue 5
PDF
157
71
Cite this Article
BibTeX
Article Info
  • Receive Date:2022-05-31
  • Online Date:2025-11-24
  • Published:2022-10-25
Article Data
Affiliations
History
  • Received:2022-05-31
Affiliations
    Inner Mongolia Baotou Steel Rare Earth Steel Plate Co., Ltd., Baotou 014010, Inner Mongolia Autonomous Region, China
References
Share
https://castjournals.cast.org.cn/joweb/bgkj/EN/
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数

Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)

Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT