In this paper, the optimization plan of chemical composition, hot rolling and annealing processes is formulated through analyzing the influences of stress concentration, inclusions, chemical composition, mechanical properties and metallographic structure on fatigue strength with the metallographic microscope and field emission scanning electron microscope. The results showed that the tensile strength of material could be improved by 11~45 MPa by increasing the contents of carbon and manganese in chemical composition, reducing the content of harmful element sulfur as well as matching hot rolling and annealing processes so that the pearlite in metallographic structure was granular and with dispersed distribution. After made into the guide rail, its push-pull effort, service life and functions are tested as well as it is determined to be qualified according to the standard requirements.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |