The assembly for pretwisted blades of turbine has significant effect on its overall performance. In this paper, its deformation mechanism is studied and simulation experiments are carried out through finite element model to verify the accuracy of assembly system for pretwisted blades. The process parameters of manually tapping blades are obtained using high speed camera and piezoelectric type impact sensor as well as corresponding mathematical model is established. The parameters of this model are adjusted in software to design the assembly system for pretwisted blades of turbine. The final results indicated that sufficient impact could be generated by the assembly system to meet assembly requirements when the range of air source pressure was between 0.4 MPa and 0.6 MPa so that feasibility and effectiveness of the system were verified.
| 科 Family | 属数 Number of genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) | 属 Genus | 种数 Number of species | 占总种数比例 Percentage of total species (%) |
|---|---|---|---|---|---|---|
| 鹅膏菌科Amanitaceae | 2 | 11 | 5.26 | 鹅膏菌属 Amanita | 10 | 4.78 |
| 小菇科 Mycenaceae | 2 | 12 | 5.74 | 丝盖伞属 Inocybe | 5 | 2.39 |
| 多孔菌科 Polyporaceae | 8 | 14 | 6.70 | 蜡蘑属 Laccaria | 5 | 2.39 |
| 红菇科 Russulaceae | 3 | 23 | 11.00 | 小皮伞属 Marasmius | 6 | 2.87 |
| 小菇属 Mycena | 11 | 5.26 | ||||
| 光柄菇属 Pluteus | 5 | 2.39 | ||||
| 红菇属 Russula | 17 | 8.13 | ||||
| 栓菌属 Trametes | 5 | 2.39 |