收藏切换
Analysis and Improvement of Edge Crack Defects in Low-temperature Oriented Silicon Steel
收藏切换
He JING1, Wei LIU1, Peng LIU1, Lei GAO2, Zuncheng WANG2, Zheyi YANG2, Shuai WANG2
Angang Technology | 2026, (5) : 60 - 66
Less
收藏切换
Angang Technology | 2026, (5): 60-66
• Production Practice •
Analysis and Improvement of Edge Crack Defects in Low-temperature Oriented Silicon Steel
Full
He JING1, Wei LIU1, Peng LIU1, Lei GAO2, Zuncheng WANG2, Zheyi YANG2, Shuai WANG2
Affiliations
  • 1.Hot Rolled Strip Steel Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China
  • 2.Ansteel Iron & Steel Research Institutes, Anshan 114009, Liaoning, China
Published: 2026-10-10 doi: 10.3969/j.issn.1006-4613.2026.05.010
Outline
收藏切换

Edge crack defects occur frequently during the hot rolling process of low-temperature oriented silicon steel, and remain one of the primary quality problems in hot-rolled coils of oriented silicon steel. Through methods such as microstructure observation, energy spectrum analysis, and thermal simulation experiments, the cause of edge crack formation was identified as decarbonization and coarsening of ferritic grain boundaries during prolonged high-temperature heating of the slab. During rolling, grain refinement through the γ→α phase transformation was impeded, and recrystallization was suppressed by low edge temperatures. The resulting coarse and elongated non-recrystallized microstructure exhibited high brittleness, and tearing during rolling led to the formation of microcracks, which further propagated into edge cracks in the finishing stage. By adopting optimized heating and rolling strategies such as seamless charging, lower heating temperature, shorter heating time, high reduction rough rolling, fewer-pass rapid rolling, heavy vertical edge rolling, and edge heater temperature compensation, the edge quality qualification rate of hot-rolled oriented silicon steel coils increased from 76.3% to 85.2%,

low-temperature oriented silicon steel  /  edge crack  /  recrystallization  /  edge heater
景鹤, 刘威, 刘鹏, 高磊, 王尊呈, 杨哲懿, 王帅. 低温取向硅钢边部裂口缺陷成因分析与改善. 鞍钢技术, 2026 , (5) : 60 -66 . DOI: 10.3969/j.issn.1006-4613.2026.05.010
He JING, Wei LIU, Peng LIU, Lei GAO, Zuncheng WANG, Zheyi YANG, Shuai WANG. Analysis and Improvement of Edge Crack Defects in Low-temperature Oriented Silicon Steel[J]. Angang Technology, 2026 , (5) : 60 -66 . DOI: 10.3969/j.issn.1006-4613.2026.05.010
Year 2026 volume Issue 5
64
11
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1006-4613.2026.05.010
  • Online Date:2026-10-27
  • Published:2026-10-10
Article Data
Affiliations
History
  • Revised:2024-09-12
Affiliations
    1.Hot Rolled Strip Steel Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China
    2.Ansteel Iron & Steel Research Institutes, Anshan 114009, Liaoning, China
References
Share
https://castjournals.cast.org.cn/joweb/agjs/EN/10.3969/j.issn.1006-4613.2026.05.010
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT