收藏切换
Calculation of Thermo-mechanical Coupling Deformation Model for 25Mn-7Al-1C Low-density Steel
收藏切换
Xuezhi LI1, Zitong WANG2, Xiaodong QU2, Wei LIU2, Fanzhi MENG2, Peng LIU2
Angang Technology | 2026, (4) : 20 - 29
Less
收藏切换
Angang Technology | 2026, (4): 20-29
• Research and Development •
Calculation of Thermo-mechanical Coupling Deformation Model for 25Mn-7Al-1C Low-density Steel
Full
Xuezhi LI1, Zitong WANG2, Xiaodong QU2, Wei LIU2, Fanzhi MENG2, Peng LIU2
Affiliations
  • 1.Anshan Iron & Steel Group Co., Ltd., Anshan 114021, Liaoning, China
  • 2.Hot Rolled Strip Steel Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China
doi: 10.3969/j.issn.1006-4613.2026.04.003
Outline
收藏切换

The hot deformation behavior of 25Mn-7Al-1C steel was investigated through single-pass hot compression tests in the range of 9 00~1 150 °C for temperature and 0.01~10 s-1 for strain rate. The constitutive equation and hot processing map of the tested steel were established. The results showed that the hot deformation activation energy of the steel was 447.5 kJ/mol, and the degree of dynamic recrystallization changed under different experimental conditions. Through synergistic analysis of dynamic recrystallization behavior and the hot processing map, hot working parameters with low temperature and high strain rate could enhance the impact toughness of the low-density steel. The optimal rolling process parameters for 25Mn-7Al-1C steel were confirmed as deformation temperature of 1 000~1 100 °C and strain rate of 0.01~1 s-1.

low-density steel  /  thermo-mechanical coupling deformation  /  constitutive equation  /  hot processing map
李学志, 王子童, 曲晓东, 刘威, 孟凡志, 刘鹏. 25Mn-7Al-1C低密度钢的热力耦合变形模型计算. 鞍钢技术, 2026 , (4) : 20 -29 . DOI: 10.3969/j.issn.1006-4613.2026.04.003
Xuezhi LI, Zitong WANG, Xiaodong QU, Wei LIU, Fanzhi MENG, Peng LIU. Calculation of Thermo-mechanical Coupling Deformation Model for 25Mn-7Al-1C Low-density Steel[J]. Angang Technology, 2026 , (4) : 20 -29 . DOI: 10.3969/j.issn.1006-4613.2026.04.003
Year 2026 volume Issue 4
171
29
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1006-4613.2026.04.003
  • Online Date:2026-09-20
Article Data
Affiliations
History
  • Revised:2025-09-08
Affiliations
    1.Anshan Iron & Steel Group Co., Ltd., Anshan 114021, Liaoning, China
    2.Hot Rolled Strip Steel Mill of Angang Steel Co., Ltd., Anshan 114021, Liaoning, China
References
Share
https://castjournals.cast.org.cn/joweb/agjs/EN/10.3969/j.issn.1006-4613.2026.04.003
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT