收藏切换
Shift Setting and Profile Optimization of Work Rolls in Tandem Cold Rolling Mills
收藏切换
Dawei QIN1, Kuiyue WANG1, 3, Jian ZHAO2, Fengpeng WANG2, Yan ZHANG1
Angang Technology | 2026, (4) : 46 - 52
Less
收藏切换
Angang Technology | 2026, (4): 46-52
• Research and Development •
Shift Setting and Profile Optimization of Work Rolls in Tandem Cold Rolling Mills
Full
Dawei QIN1, Kuiyue WANG1, 3, Jian ZHAO2, Fengpeng WANG2, Yan ZHANG1
Affiliations
  • 1.Ansteel Group Beijing Research Institute Co., Ltd., Beijing 102200, China
  • 2.Silicon Steel Busniness Division of Angang Steel Co., Ltd., Anshan 114009, Liaoning, China
  • 3.Northeastern University, Shenyang 110819, Liaoning, China
doi: 10.3969/j.issn.1006-4613.2026.04.006
Outline
收藏切换

Edge drop control accuracy is a key indicator that determines the core competitiveness of high-end cold-rolled products. Edge drop defects not only reduce product yield but also significantly deteriorate the downstream processing performance. Key edge drop control technologies and roll profile optimization for tandem cold rolling mills were investigated. The synergistic mechanisms among edge drop characteristics of hot-rolled raw materials, roll profile design, and roll shift control were comprehensively analyzed. A full-factor edge drop control solution covering raw material characteristics, roll profile design, and compensation control was formulated. Based on the working principle of the work roll shift device, the calculation methods for key parameters such as work roll shift position, shift amount, and shift insertion amount were derived. Based on the generation mechanism of edge drop, thickness attenuation characteristics at strip edges were analyzed by using measured data obtained from edge drop gauges. Edge attenuation coefficient models for each rolling pass were established, and the calculation methods for the edge compensation roll gap of each stand were further deduced. An auxiliary roll profile design method and a tandem mill edge drop prediction method were both developed on the basis of the edge drop characteristics of hot-rolled raw materials and the edge attenuation characteristics of rolled strip. Finally, auxiliary decision-making software for edge drop control and roll profile design was developed, which provided theoretical foundation and technical support for the process optimization of cold rolling edge drop control in cold rolling production.

tandem rolling mill  /  edge drop control  /  roll profile design  /  edge attenuation
秦大伟, 王奎越, 赵健, 王奉鹏, 张岩. 冷连轧机工作辊窜辊设定及辊形优化. 鞍钢技术, 2026 , (4) : 46 -52 . DOI: 10.3969/j.issn.1006-4613.2026.04.006
Dawei QIN, Kuiyue WANG, Jian ZHAO, Fengpeng WANG, Yan ZHANG. Shift Setting and Profile Optimization of Work Rolls in Tandem Cold Rolling Mills[J]. Angang Technology, 2026 , (4) : 46 -52 . DOI: 10.3969/j.issn.1006-4613.2026.04.006
Year 2026 volume Issue 4
162
36
Cite this Article
BibTeX
Article Info
doi: 10.3969/j.issn.1006-4613.2026.04.006
  • Online Date:2026-09-20
Article Data
Affiliations
History
  • Revised:2026-07-15
Funding
Affiliations
    1.Ansteel Group Beijing Research Institute Co., Ltd., Beijing 102200, China
    2.Silicon Steel Busniness Division of Angang Steel Co., Ltd., Anshan 114009, Liaoning, China
    3.Northeastern University, Shenyang 110819, Liaoning, China
References
Share
https://castjournals.cast.org.cn/joweb/agjs/EN/10.3969/j.issn.1006-4613.2026.04.006
Share to
QR

Scan QR to access full text

Cite this article
BibTeX
Citations
表12种不同金属材料的力学参数
科
Family
属数
Number of
genus
种数
Number of
species
占总种数比例
Percentage of
total species (%)
属
Genus
种数
Number of
species
占总种数比例
Percentage of total
species (%)
鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78
小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39
多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39
红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87
小菇属 Mycena 11 5.26
光柄菇属 Pluteus 5 2.39
红菇属 Russula 17 8.13
栓菌属 Trametes 5 2.39
关闭全屏
  • BibTeX
  • EndNote
  • RefWorks
  • TxT