燃料化学学报（中英文）

荧光纳米成像破解工业分子筛催化剂“黑箱”：传质-酸性-积炭机理与优化设计

PDF下载

关慧敏 ¹ , 唐琴 ¹ , 张君屹 ² , 张梅花 ¹ , 黄义星 ¹ , 王焕 ¹ , 段宏昌 ³^,^* , 秦玉才 ¹ , 宋丽娟 ¹^,^*

燃料化学学报（中英文） | 2026,54(5): 20250328-837-20250328-854

收起

燃料化学学报（中英文） 2026 , 54 (5) : 20250328-837 -20250328-854

荧光纳米成像破解工业分子筛催化剂“黑箱”：传质-酸性-积炭机理与优化设计

全屏

关慧敏¹, 唐琴¹, 张君屹², 张梅花¹, 黄义星¹, 王焕¹, 段宏昌³^,^*, 秦玉才¹, 宋丽娟¹^,^*

作者信息

¹辽宁石油化工大学石油化工学院辽宁省石油化工催化科学与技术重点实验室, 辽宁抚顺 113000

²中国石油兰州石化公司, 甘肃兰州 730060

³中国石油石油化工研究院兰州化工研究中心, 甘肃兰州 730060

通讯作者:

段宏昌, 宋丽娟

Fluorescence nanoscopy unveils the black box of industrial zeolite catalysts: Mechanisms and optimization of mass transfer-acidity-coke formation

Huimin GUAN¹, Qin TANG¹, Junyi ZHANG², Meihua ZHANG¹, Yixing HUANG¹, Huan WANG¹, Hongchang DUAN³^,^*, Yucai QIN¹, Lijuan SONG¹^,^*

Affiliations

¹Liaoning Key Laboratory of Petrochemical Catalytic Science and Technology, College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113000, China

²PetroChina Lanzhou Petrochemical Company, Lanzhou 730060, China

³Lanzhou Petrochemical Research Centre, PetroChina Petrochemical Research Institute, Lanzhou 730060, China

Corresponding Author:

Tel: 15242715386, 13941350056; E-mail: duanhongchang@petrochina.com.cn

lsong@lnpu.edu.cn

出版时间: 2026-05-10 doi: 10.1016/S1872-5813(26)60652-4

文章导航

摘要

收起

工业分子筛催化剂(典型如FCC催化剂)的应用性能，受其传质、酸性及积炭等微观行为制约。传统表征技术对此类“结构-性能”关系的认知存在局限。本综述总结了超分辨荧光成像技术在解析上述关键微观过程的最新研究进展：(1)传质扩散行为：揭示了反应分子在复杂等级孔道内的非均匀扩散行为；(2)酸中心可及性：实现了酸性位点的纳米级定位与可接近性的可视化；(3)积炭行为：辨识了催化剂上积炭物种的时空演变机制。同时，还系统阐述了超分辨成像如何从纳米尺度深化对催化剂核心机理的理解，为精准设计高性能催化剂(优化孔道、调控酸中心、抑制积炭)提供关键理论支撑，并展望了该技术面临的挑战与未来发展方向。

关键词

超分辨荧光成像技术 / 分子筛催化剂 / 传质扩散 / 酸中心 / 积炭

Abstract

收起

The performance of industrial zeolite catalysts, typically exemplified by fluid catalytic cracking (FCC) catalysts, is governed by microscopic behaviors such as mass transfer, acidity and coking. Conventional characterization techniques exhibit limitations in elucidating the structure-performance relationships. So, recent advances in super-resolution fluorescence imaging for deciphering the key microscopic processes are systematically summarized in this review: (1) Mass transfer diffusion behavior: the heterogeneous diffusion of reactant molecules within hierarchical pore networks are revealed; (2) Acid site accessibility: nanoscale localization of acid sites and visualization of their accessibility are achieved; (3) Coking behavior: the spatiotemporal evolution mechanism of coke species on the catalysts are identified. Furthermore, the review elaborates on how super-resolution imaging deepens the understanding of fundamental catalytic mechanisms at the nanoscale, providing theoretical support for the rational design of high-performance catalysts-such as pore structure optimization, acid site regulation, and coking suppression-and concludes with an outlook on current challenges and future directions.

Key words

super-resolution fluorescence imaging / zeolite catalysts / mass transfer diffusion / acid sites / coking

引用本文

关慧敏, 唐琴, 张君屹, 张梅花, 黄义星, 王焕, 段宏昌, 秦玉才, 宋丽娟. 荧光纳米成像破解工业分子筛催化剂“黑箱”：传质-酸性-积炭机理与优化设计. 燃料化学学报（中英文）, 2026 , 54 (5) : 20250328-837 -20250328-854 . DOI: 10.1016/S1872-5813(26)60652-4

Huimin GUAN, Qin TANG, Junyi ZHANG, Meihua ZHANG, Yixing HUANG, Huan WANG, Hongchang DUAN, Yucai QIN, Lijuan SONG. Fluorescence nanoscopy unveils the black box of industrial zeolite catalysts: Mechanisms and optimization of mass transfer-acidity-coke formation[J]. Journal of Fuel Chemistry and Technology, 2026 , 54 (5) : 20250328-837 -20250328-854 . DOI: 10.1016/S1872-5813(26)60652-4

正文

收起

Industrial catalytic processes constitute the core of modern chemical industry, and their efficiency and selectivity directly determine energy utilization and conversion efficiency, environmental impact, and production costs^[1−4]. Zeolite catalysts have become indispensable materials in petroleum refining, chemical synthesis, and related fields due to their well-defined micropores and tunable acidity. The macroscopic performance of catalysts is essentially determined by their microscopic structure, among which mass transfer efficiency, accessibility of acid sites, and coking behavior are three key microscopic factors constraining their activity and selectivity^[5−14].

Traditional characterization techniques (e.g. XRD, N₂ physisorption, and TPD, etc.) exhibit significant limitations in resolving the microstructural properties of the zeolite catalysts^[15−29]. These techniques mostly provide bulk-averaged information or static ex situ data, making it difficult to achieve in situ observation of dynamic processes such as mass transfer, acidity and coke formation under real reaction conditions involving high temperature, high pressure, and flowing media^[30−33]. This deficiency in understanding the microscopic mechanisms has long kept the correlation between catalyst structure and performance in a “black-box”. In the 400 kt/a polypropylene unit of PetroChina Lanzhou Petrochemical Company, the fluctuation in product selectivity caused by the non-uniform distribution of acid sites in the ZSM-5 catalyst exemplifies the manifestation of the aforementioned technical bottleneck in industrial practice^[34].

In recent years, the rise of super-resolution fluorescence imaging technology has provided a novel pathway to overcome the bottleneck. By ingenious designing molecular probes, such as merocyanine-based dyes with excellent photostability and environmental sensitivity, the technique utilizes fluorescence signal inversion to surpass the optical diffraction limit. The breakthrough enables the combination of nanoscale spatial resolution with exceptional in situ imaging capabilities. This enables to “visualize” the transport pathways of reactant molecules within the nanoscale channels of catalysts, accurately map the spatial distribution of acid sites and assess their accessibility, and even directly track the dynamic formation and evolution of coke species-all in environments approaching real reaction conditions. The team led by Weckhuysen has achieved a series of breaking in this field. For instance, the application of single-molecule fluorescence tracking technology enabled the first-ever measurement of local diffusion coefficient distributions within industrial catalyst particles. Furthermore, through super-resolution imaging, they successfully revealed nanoscale heterogeneity in the activity across the catalyst particles^[35]. In the methanol-to-olefins (MTO) reaction, in situ UV-vis and fluorescence microscopic imaging are employed to track the formation and evolution of coke species within individual H-ZSM-5 crystals in real time. The study suggested that polycyclic aromatic hydrocarbons preferentially form at the crystal edges and pore intersections, providing direct evidence for the catalyst deactivation^[36−37]. The results demonstrate that super-resolution fluorescence imaging technology not only addresses the longstanding “black-box” in industrial catalysis, but also provides a new visual, data-driven tool for catalyst screening, lifespan prediction, and structural optimization.

This paper will systematically elucidate the principles and characteristics of various super-resolution fluorescence imaging techniques, with a particular focus on discussing the latest applications in addressing key microscopic behavioral challenges in industrial zeolite catalysts, such as mass transfer, acidity, and coke deposition. By establishing precise correlations between nanoscale microstructure and macroscopic performance degradation, this review aims to elucidate the intrinsic mechanisms of catalyst deactivation and enhancement. It further seeks to develop microscopic design principles for catalysts with high coke resistance and efficient diffusion, providing theoretical foundations and practical pathways for targeted development of a new generation of high-performance zeolite catalysts.

1　Fluorescence microscopy

收起

1.1　Confocal laser scanning microscopy (CLSM)

Confocal fluorescence microscopy has emerged as a powerful tool for analyzing the multiscale structure of industrial catalysts, thanks to its unique optical sectioning capability^[38−46]. By employing a pinhole device, this technique effectively filters out fluorescence interference from out-of-focus planes. A typical optical path configuration of the system is illustrated in Figure 1. The point-scanning mechanism combined with pinhole-conjugate detection enables the acquisition of two-dimensional optical sections with high signal-to-noise ratio. In catalyst characterization, this advantage allows layer-by-layer analysis of fluorescence signals at varying depths within the particles. Consequently, it facilitates the three-dimensional reconstruction of catalyst spatial structures, providing direct evidence to elucidate critical aspects such as mass transfer and active site distribution in industrial catalysts.

To overcome the spatial resolution limitations imposed by the optical diffraction limit, multiple research teams have developed innovative super-resolution imaging strategies. Based on a confocal system, the research by Zhang has developed parallel detection pixel reassignment and fluorescence emission difference techniques. The technology utilizes spatial light modulators to precisely control the excitation light field and significantly enhances three-dimensional resolution while maintaining high-speed imaging capabilities through algorithmic optimization^[47]. The team of Zhao proposed a reflective differential confocal technique, which integrates bilateral fitting with super-resolution restoration algorithms, achieving nanometer-level axial resolution and high environmental stability^[48].

The multidimensional advancements in confocal technology now enable precise capture of three-dimensional structures and dynamic evolution within complex catalyst systems. By enabling in situ monitoring of critical parameters such as pore structures, active site distribution, and coking behavior, the technology provides a robust foundation for rational catalyst design and process optimization, effectively illuminating the opaque “black box” in traditional development approaches.

1.2　Total internal reflection fluorescence microscopy (TIRFM)

Total Internal Reflection Fluorescence Microscopy (TIRFM) demonstrates significant advantages in studying surface processes of industrial catalysts, leveraging its unique principle of evanescent wave excitation. The technique selectively excites samples using evanescent waves generated by total internal reflection, with a typical working principle illustrated in Figure 2. Since the penetration depth of evanescent waves perpendicular to the interface is strictly confined to nanometer scale (typically 100−200 nm), this technique can precisely restrict the excitation region to the catalyst surface and near-surface area which eliminates the interference from bulk fluorescence, resulting in exceptionally high signal-to-noise ratios and contrast during imaging^[49−53].

The unique surface-selective imaging capability makes TIRFM an ideal tool for investigating the physicochemical processes on catalyst surfaces. For instance, Frederice’s team successfully achieved in situ imaging of charge injection processes in CdS/TiO₂ composite materials by employing sequential fluorescence imaging in combination with resazurin and resorufin fluorescent probes. This approach clearly revealed the differences in charge injection efficiency between CdS/TiO₂ and SiO₂TiO₂/CdS structures, directly correlating the differences with macroscopic hydrogen production performance. It thus provides a powerful means for understanding the “structure-performance” relationship at the single-particle scale and enables rational catalyst design^[54].

1.3　Super-resolution fluorescence microscopy (SRFM)

While both confocal and two-photon techniques enhance the resolution of optical microscopy, they remain constrained by the diffraction limit. To overcome the problem, various super-resolution fluorescence microscopy techniques have been developed. Examples include structured illumination microscopy (SIM), stimulated emission depletion microscopy (STED), and single-molecule localization-based techniques such as stochastic optical reconstruction microscopy (STORM) using organic dyes, as well as photoactivated localization microscopy (PALM/fPALM) employing fluorescent proteins. Stochastic Optical Reconstruction Microscopy (STORM) achieves super-resolution imaging by temporally separating the emission behaviors of fluorescent molecules. As illustrated in Figure 3, the process begins by using photoswitchable fluorescent probes to randomly activate a sparse subset of molecules into an emissive state under controlled activation laser illumination, ensuring that the spacing between adjacent molecules exceeds the diffraction limit. Subsequently, the activated molecules are excited to emit fluorescence whose diffraction-limited spots are captured by a highly sensitive camera. Using single-molecule localization algorithms, the central position of each fluorescence spot is determined with nanometer-level precision (typically within 20−30 nm). Through tens of thousands of cycles of “activation-localization-quenching”, precise positional information for all fluorescent molecules within the sample is collected. Ultimately, all localized coordinates are reconstructed into a comprehensive super-resolution image. The approach breaks through the optical diffraction limit, enabling nanoscale visualization of critical processes within catalysts such as internal pore structures, active site distribution, and the evolution of reaction intermediates. It thereby provides direct observational evidence for mechanistic analysis and performance optimization of industrial catalysts^[55−58]. For example, Weckhuysen’s team employed single-molecule super-resolution imaging for the first time to quantitatively reveal the difference of up to an order of magnitude in catalytic activity among distinct zeolite domains within industrial FCC catalyst particles^[59].

1.4　Other related fluorescence techniques

Beyond the mainstream fluorescence microscopy techniques discussed above, fluorescence lifetime imaging (FLIM) and single-molecule fluorescence imaging also offer unique perspectives for catalyst characterization^[60−65]. FLIM detects the excited-state lifetime of fluorophores to sensitively probe microenvironmental characteristics (such as polarity and pH value) on the catalyst surfaces, thereby realizing the analysis of localized chemical interactions. Single-molecule imaging, by analyzing individual fluorescence signals, directly reveals the heterogeneity in activity distribution within and across the catalyst particles, overcoming the averaging limitations inherent in bulk measurements. For instance, the team led by Zürner et al.^[66] employed single-molecule tracking to visualize the diffusion trajectories of individual molecules within mesoporous materials for the first time, directly elucidating the pore transport characteristics from the perspective of mass transfer. Hendriks et al.^[67] further correlated the single-molecule signals with the accessibility of acid sites and the mechanisms of coking-induced deactivation within the catalyst particles, thereby bridging the gap from physical observation to chemical processes.

2　Selection principles and mechanism of action of fluorescent probes

收起

Fluorescent probes serve as the core element of super-resolution fluorescence imaging techniques whose appropriate selection and design directly determine the accuracy and reliability of experimental outcomes. In zeolite catalyst research, fluorescent probes must be selected according to the objectives such as mass transfer, acid sites, and coke formation.

For mass transfer studies, physical tracers such as rhodamine B and merocyanine are typically employed. The probes diffuse along concentration gradients, enabling clear visualization of molecular transport pathways within pore networks through time-series imaging. In the characterization of acid sites, the selection of fluorescent probes primarily encompasses three categories: basic recognition probes, reactive conversion probes, and polymer-tagged probes. Representative alkaline organic molecules such as DAMPI and Nile Blue A contain nitrogen-rich molecular structures that specifically interact with Brønsted acid sites. This binding induces significant changes in fluorescence quantum yield or emission wavelength, enabling nanoscale spatial localization and semi-quantitative analysis of acid strength. Reactive probes such as thiophene and furfuryl alcohol undergo acid-catalyzed oligomerization to form highly fluorescent oligomers. The location and intensity of the resulting fluorescence signals directly reflect the spatial distribution of the acid sites and their activity. p-methylstyrene, functioning as a polymer-tagged probe, undergoes cationic polymerization initiated by acid sites to form fluorescent polymer chains. This characteristic makes it an effective tool for investigating acid site accessibility and activity. The three types of probes each offer distinct advantages, providing multi-dimensional solutions for characterizing zeolite acidity through static recognition, dynamic reaction, and polymerization labeling, respectively. For coking behavior monitoring, two complementary strategies are primarily adopted: firstly, label-free imaging based on the intrinsic fluorescence of carbon deposits, which effectively distinguishes the carbon species with varying degrees of graphitization by analyzing spectral characteristics. Secondly, the use of reactive probes such as thiophene and furfuryl alcohol, which generate highly fluorescent products through catalytic reactions on acid sites, thereby indicating active sites prone to coking and potential reaction pathways.

In summary, the selection of fluorescent probes for imaging studies of zeolite catalysts must adhere to specific mechanisms tailored to different research scenarios. The investigation of mass transfer processes primarily relies on the principle of physical diffusion tracing. The acidity characterization depends on specific interactions between probes and acid sites. While coking monitoring can be achieved through two complementary approaches: direct detection via intrinsic fluorescence and reaction pathway tracing. A thorough understanding of the mechanistic differences and the appropriate selection of probes hold theoretical guidance and practical value for establishing accurate “structure-performance” correlations in catalysts.

3　Fluorescence imaging unveils mass transfer resistance and diffusion pathways

收起

3.1　Correlation between catalyst structure and mass transfer performance

Kumar et al.^[68] developed a confocal fluorescence microscopy method based on fluorescent staining, enabling chemical imaging of individual zeolite domains within the FCC catalyst particles at nanoscale while simultaneously staining the matrix material. Reis et al.^[69] synthesized two reactive phenanthrene derivatives with high quantum yields as fluorescent markers for the microscopic imaging of surface-modified micron-sized zeolite L. The approach offers a novel method for the visualization of zeolite-based catalysts. Li et al.^[70] employed single-particle fluorescence spectroscopy to image charge carrier transport in facet-dependent semiconductor photocatalysts, thereby revealing the distribution of active sites and charge transfer pathways. In summary, fluorescence microscopy imaging, with the powerful capability for spatiotemporally resolved visualization of mass transfer, has become a key approach for establishing correlations between catalyst structure and performance, opening new directions for mass transfer research.

Building upon the technical foundation, our team employed laser scanning confocal microscopy and single-molecule super-resolution fluorescence imaging to address the mass transfer limitations of traditional kaolin-based catalysts (CAT-1) i.e. five FCC catalysts with different matrix materials were synthesized. Using Rhodamine B staining (Figure 4(a))^[71] and fluorescence imaging analysis, the mass transfer of catalysts doped with various matrix materials was evaluated. The results indicated that the catalyst using the independently developed macroporous Brønsted acid-rich matrix APM-9 (CAT-6) exhibited significantly optimized mesoporous structure, with a mass transfer diffusion coefficient up to 25 times that of conventional catalysts, achieving a breakthrough in performance.

Furthermore, the imaging technique was employed to investigate the mechanism by which crystallization time affects the mass transfer performance of the catalysts. By controlling the in situ crystallization time (1, 8, 16 and 24 h), four types of FCC catalysts with varying Y-zeolite content were prepared. Combining breakthrough experiments with acridine probe staining (Figure 4(b))^[72], fluorescence imaging results confirmed that the distribution of Y-zeolite could be precisely controlled via in situ crystallization, thereby optimizing the pore structures–a key strategy for achieving superior mass transfer performance.

3.2　Mass transfer bottlenecks in crystal structures and hierarchical pore optimization

Zeolite crystals are typically composed of multiple intergrown subcrystalline domains with varying orientations. The complexity of the internal pore structures leads to significant anisotropy in reactant diffusion. Karwacki et al.^[73] utilized fluorescence imaging to reveal that the 90° intergrowth structure within ZSM-5 crystals results in alternating straight and sinusoidal channels, forming a “diffusion maze”. Ristanović et al.^[59] further employed single-molecule imaging to unveil significant differences in diffusion rates and activities among distinct subcrystalline domains, confirming the profound impact of intracrystalline diffusion heterogeneity on the catalytic processes.

To overcome the diffusion limitations caused by the inherent crystal structure, constructing a hierarchical pore system has proven to be an effective strategy. Zhu et al.^[74] introduced fluorine ions during the synthesis of SSZ-13 zeolite (SSZ-13-10F), creating a hierarchical structure rich in secondary micropores (0.46−0.7 nm). Fluorescence imaging results demonstrated that the reaction signals achieved full penetration throughout the modified crystals (Figure 5), significantly enhancing the diffusion efficiency of the reactants and the products. Consequently, the material exhibited prolonged catalyst lifespan and higher carbon tolerance in the MTO reaction.

In methodological terms, Hendriks et al.^[75] utilized confocal fluorescence microscopy combined with a series of increasingly sized DAMPI-based fluorescent probe molecules. Through three-dimensional imaging and polarization-dependent measurements, they systematically revealed the adsorption behavior and alignment orientation of the probe molecules within pores of different sizes (Figure 6(a)), offering a novel approach for assessing zeolite accessibility.

The team led by Peng et al.^[76−77] further employed structured illumination microscopy (SIM) in conjunction with non-reactive and reactive probes to achieve dynamic visualization of diffusion processes inside the ZSM-5 zeolite. The results suggested that acid etching effectively reduces the surface diffusion barriers, facilitating the mass transfer of reactants into the crystal interior and thereby significantly enhancing the catalytic reaction rates (Figure 6(b), (c)).

3.3　Catalytic mass transfer mechanisms and industrial optimization pathways

In industrial processes, optimizing the diffusion pathways of the catalysts is a critical step for enhancing the reaction efficiency. Fluorescence microscopy imaging not only accurately identifies the locations and extent of mass transfer limitations but also provides direct visual evidence for the precise tuning of internal catalyst structures and the optimization of diffusion pathways. At the fundamental research level, multiple studies have demonstrated the value of the technology in elucidating the mechanisms linking mass transfer and reaction processes. Hendriks et al.^[78] utilized single-molecule fluorescence tracking to analyze the diffusion trajectories of PDI probe molecules within FCC catalyst particles, providing a direction for establishing correlations between “structure-mass transfer-reaction performance” at the single catalyst particle level or within other hierarchical materials. Park et al.^[79] employed total internal reflection fluorescence microscopy to observe the fluorescence trajectories of individual molecules in a Diels-Alder reaction with high temporal resolution (~100 ms). By analyzing the intensity variations, they identified the reaction intermediates and successfully quantified the kinetic parameters for state transitions, thereby revealing the microscopic kinetics of organocatalytic reactions at the single-molecule level. Reis et al.^[80] applied the technique to the palladium-catalyzed Suzuki-Miyaura cross-coupling reaction, analyzing the fluorescence blinking trajectories to calculate the single-molecule turnover frequencies. This approach provides a novel method for assessing the impact of catalyst loading on catalytic efficiency.

In the realm of industrial catalyst design, our team employed super-resolution fluorescence microscopy and single-molecule trajectory tracking to systematically reveal the identification and modulation mechanisms of surface mass transfer barriers in ZSM-5 zeolite (Figure 7)^[81]. The study suggested that due to the micropore limitations in conventional ZSM-5 (CAT-0), probe molecules could only diffuse to the crystal edges, resulting in significant mass transfer barriers. In contrast, the CAT-W sample, prepared via template-protected alkaline treatment, successfully constructed a continuous mesoporous system while maintaining the integrity of the crystal structure. This led to an approximately 1.39-fold increase in the effective diffusion coefficient of probe molecules, significantly enhancing the mass transfer efficiency within the support and enabling high-efficiency transport from the surface to the interior. This research clarifies the structure-activity relationship of “template protection-mesopore construction-diffusion enhancement” at the microscale, offering critical guidance for the rational design of industrial catalysts.

4　Analysis of acid sites accessibility

收起

4.1　Multiscale characterization of spatial distribution and accessibility of acid sites

As the key active centers in industrial catalysts, the spatial distribution and accessibility of acid sites directly determine the efficiency of the catalytic reactions. However, traditional characterization methods can only reflect average acidity information of the catalysts, making it difficult to reveal the microscale heterogeneous characteristics. In recent years, the emergence of fluorescence microscopy techniques has provided powerful tools for in situ, high-resolution imaging of acid sites.

In studying the deactivation mechanisms of industrial fluid catalytic cracking (FCC) catalysts, Buurmans et al.^[82] innovatively developed a dual-probe confocal fluorescence staining strategy using thiophene and Nile Blue A. The technique successfully enabled simultaneous visualization and quantitative analysis of zeolite active centers and Brønsted acid sites at the single-particle level. It not only clearly revealed significant acidity heterogeneity within and between particles but also, more importantly, established a positive correlation between fluorescence intensity and the activity (Figure 8). This confirmed a quantitative “acidity-activity” relationship in an industrial catalyst for the first time, providing direct evidence for understanding the dynamic evolution of acid sites during the catalyst deactivation.

Furthermore, in their study on acid sites imaging of H-ZSM-5 zeolite crystals, quantitative three-dimensional single-molecule fluorescence microscopy was employed to precisely measure the catalytic activity of different acid sites^[83]. The results showed that mild steam treatment at 500 °C significantly enhanced the acid site accessibility by introducing mesoporous structures, increasing the local catalytic turnover frequency by up to fourfold. In contrast, steam treatment at 700 °C led to substantial dealumination, significantly reducing both the number of acid sites and the turnover frequency, clearly demonstrating the critical regulatory role of pore structure on acidic reactivity.

By integrating dark-field microscopy imaging with temperature-programmed desorption (TPD), the team led by Yi et al.^[84] developed the optical temperature-programmed desorption (oTPD) method. By real-time tracking of the scattering intensity changes of individual zeolite nanoparticles during ammonia desorption, this method enables intrinsic evaluation of the quantity, strength, and desorption kinetics of acid sites. The technique not only reveals heterogeneity in acid properties at the single-particle level but also establishes, for the first time, a linear relationship between acid strength and silicon island content, offering a new perspective for understanding structure-acidity relationships.

Building upon traditional imaging methods, our team integrated super-resolution fluorescence microscopy with GIS-based spatial quantitative analysis. Through nearest-neighbor distance analysis, precise characterization of the spatial distribution of acid sites within ZSM-5 zeolite was achieved^[85]. As shown in Figure 9, by statistically analyzing the spatial distances between active acid sites, it was confirmed that after alkaline treatment, the number of acid sites in regions larger than 10 nm increased significantly. This finding indicated that alkaline treatment effectively eliminated the surface diffusion barriers, allowing originally embedded acid centers to be fully exposed, thereby addressing the distribution challenge of acid sites being “accessible yet not densely clustered.”

In collaboration with the PetroChina Lanzhou Petrochemical Research Center, we employed spatiotemporally resolved fluorescence imaging to systematically elucidate the inherent trade-off mechanism between particle size and acid site accessibility in FCC catalysts^[86]. The results suggested that small-particle catalysts (CAT-1: 10−20 μm), benefiting from abundant submicron pores ( < 0.2 μm) and shorter diffusion pathways, achieved full penetration of acid sites within 3 min. In contrast, large-particle catalysts (CAT-6: 120−180 μm) suffered from significantly extended mass transfer pathways, resulting in severely reduced accessibility in the core regions (Figure 10).

Based on the studies at the single-particle level, a quantitative structure-activity relationship among “particle size, pore structure, and mass transfer efficiency” were established. Accordingly, we propose that precisely controlling the catalyst particle size within the range of 10−50 μm is a key strategy to overcome the mass transfer resistance and optimize the reaction efficiency.

4.2　Spatial heterogeneity and regulatory mechanisms of acid site utilization efficiency

In the study of reaction heterogeneity within industrial FCC catalyst particles, Ristanović et al.^[59] employed single-molecule fluorescence super-resolution imaging techniques (NASCA and SOFI) to realize quantitative imaging of catalytic activity in submicron ZSM-5 aggregates inside the catalyst particles for the first time. The study revealed significant differences in Brønsted acidity and turnover frequencies among distinct zeolite domains within the same particle, with utilization efficiency of active sites varying by up to an order of magnitude. This work unveils the substantial heterogeneity in active site utilization efficiency within the catalysts at the nanoscale, providing direct evidence for optimizing the performance of industrial catalysts.

The team further employed single-molecule fluorescence microscopy to track, in real time, the formation of fluorescent oligomers from styrene derivatives on Brønsted acid sites of zeolites which established a novel method using individual fluorescence events as counts for catalytic conversions. Local turnover frequencies at the nanoscale were calculated, enabling precise evaluation of the utilization efficiency of active sites in different regions of the crystal^[87]. The study also found that photostable trimers preferentially form in defect-rich regions, providing a new nanoscale spectroscopic marker for assessing the zeolite quality.

Leveraging methodological innovation, the team used furfuryl alcohol as a probe. By precisely counting fluorescence events and calculating the local turnover frequencies, they quantified, for the first time in three-dimensional space, the impact of steam treatment on the utilization efficiency of active sites across different regions of H-ZSM-5 (Figure 11)^[88]. The study revealed that after mild steam treatment, the turnover frequency in the near-surface regions of the crystals could be up to four times higher than in the bulk, though the distribution of utilization efficiency was highly uneven. In contrast, severe steam treatment caused the overall turnover frequency to plummet by 460-fold. Combined with TOF-SIMS elemental analysis, the intrinsic correlation between aluminum migration and active site utilization efficiency was clarified.

By employed ZSM-5 as a model system, our team constructed a hierarchical pore system (2−5 nm) using template-protected alkaline etching (Figure 12)^[85]. Thiophene was selected as probe molecule for the catalytic conversion to fluorescent trimers on Brønsted acid sites to compare the actual accessibility of acid sites in hierarchical pore versus microporous zeolites. The results showed a 114% increase in fluorescence signal density of trimeric products in the former, experimentally confirming the significant enhancement of active site utilization efficiency by the hierarchical pore structure.

5　Investigation of catalyst coking behavior

收起

5.1　Localization and identification of coke species

Coke deposition is one of the key factors leading to catalyst deactivation. Traditional characterization methods struggle to enable in situ observation of the spatiotemporal evolution of coke species at the nanoscale. However, the fluorescence imaging technology offers a breakthrough tool for this purpose.

In the study of catalytic pyrolysis of polypropylene to produce aromatic hydrocarbons (BTX), Weckhuysen’s team combined in situ fluorescence microscopy, UV-vis spectroscopy, and solid-state NMR to achieve, for the first time, in situ visualization of aromatic intermediate evolution at the nanoscale during the reaction^[89]. As shown in Figure 13, it was found that the spent industrial FCC catalysts (ECAT), due to their moderate acidity and excellent structural accessibility, could significantly suppress graphitic carbon deposition while maintaining 20% of aromatic yield. This phenomenon revealed the synergistic mechanism between zeolite and matrix domains in coke formation.

In the methanol-to-olefins (MTO) reaction, the coke-induced deactivation in ZSM-5 zeolite has long constrained its industrial application. Mores et al.^[90] further combined in situ UV-vis microspectroscopy with confocal fluorescence microscopy to unveil the microscopic pathways of coke evolution: during the initial reaction stage, methyl-substituted aromatic carbocations formed, gradually developing into linear polycyclic aromatic hydrocarbons, and ultimately leading to the formation of non-removable graphitic carbon on the catalyst surface.

Polarization spectroscopy further confirmed that large coke molecules preferentially align along the straight channels of ZSM-5 (Figure 14)^[90]. Moreover, acid density played a critical regulatory role in coking behavior i.e. high acid density significantly accelerated coke formation. However, when the Si/Al ratio exceeded 17, reaction temperature, instead of the acid density, became the dominant factor.

To further reveal the spatial distribution patterns of coke deposition, the teams of Zenobi and Kumar, in collaboration with Weckhuysen’s team, combined hyperspectral confocal fluorescence microscopy with tip-enhanced fluorescence microscopy. For the first time, they mapped a “spatiotemporal atlas” of coke evolution on ZSM-5 catalysts at the nanoscale (Figure 15)^[91]. The results revealed that during the initial reaction stage, small methylated aromatic molecules predominantly accumulated in the crystal center, while graphite-like carbon preferentially formed at the crystal edges. As the reaction progressed, graphitic coke gradually spread across the entire crystal surface, ultimately leading to catalyst deactivation. Even more remarkably, the TEFL technique, with its approximately 35 nm ultra-high resolution, visually demonstrated that step edges on the crystal surface exhibited higher catalytic activity and a greater tendency for coke deposition, suggesting the inherent heterogeneity in the distribution of active sites on the catalyst surface.

5.2　Coking mechanisms and catalyst design optimization

To effectively suppress the catalyst coking and extend its service life, researchers have utilized advanced characterization techniques to elucidate the coking mechanisms and guide the design of catalyst structures. Significant progress has been achieved in several key catalytic systems.

In the methanol-to-olefins (MTO) reaction, by combining confocal fluorescence microscopy with hyperpolarized ¹²⁹Xe NMR spectroscopy, Gao et al.^[92] found that the coke deposition in SAPO-34 zeolite exhibited a “shell-rich” distribution pattern (Figure 16). This finding informed the optimization of diffusion pathways: by modulating crystal size and pore structure, diffusion limitations of reactants were effectively alleviated, significantly delaying the catalyst deactivation caused by coke deposition.

In the skeletal isomerization of oleic acid, the study further elucidated the regulatory role of pore structure on coking behavior. Based on polarized fluorescence analysis of Ferrierite single crystals (Figure 17)^[93], the entrance region of the 10-membered ring straight channels was identified as the preferential site for coke formation. This understanding provided clear direction for catalyst optimization: by modulating crystal size to increase pore entrance density, pore clogging could be effectively delayed, thereby significantly enhancing the catalyst stability and service life during long-term operation.

To address the coking issue of Ni-based catalysts in the dry reforming of methane, the team led by Zu collaborated with our group to design a b-axis-oriented Ni@S-1 nanosheet catalyst (Figure 18)^[94]. By precisely controlling the nanosheet thickness to 60 nm, a dynamic balance between Ni⁰ and NiO_x(OH)_γ active sites was achieved, establishing a self-regulated “coking-decoking” cycle. This enabled stable operation of the catalyst for 100 h at 750 °C, demonstrating the outstanding anti-coking performance.

Weckhuysen’s team combined atom probe tomography (APT) with confocal fluorescence microscopy (CFM) to reveal, for the first time across scales (micro- to nano-), the intrinsic relationship between coke distribution and nanostructure in Beta zeolites (Figure 19)^[95], elucidating the microscopic origins of non-uniform deactivation in industrial catalysts. Furthermore, by employing in situ UV-vis spectroscopy and confocal fluorescence microscopy, the team revealed, at the single-particle level, that coke precursors preferentially grew along the straight channels during template decomposition in ZSM-5 zeolite, eventually distributing uniformly within the crystal. This discovery not only provided a theoretical basis for optimizing industrial calcination processes to avoid pore blockage but also opened new approach for designing shape-selective zeolite materials, regulating reaction pathways, and suppressing coke formation.

6　Conclusion and outlook

收起

This article systematically reviews the latest advances in super-resolution fluorescence imaging technology for unraveling the “black box” in industrial zeolite catalysts. By enabling in situ, quantitative analysis of key microscopic processes such as mass transfer, acidity, and coke formation at the nanometer and single-molecule scales, the technology has successfully transformed industrial catalysts from “black boxes” into “transparent reactors.” The research reveals that mass transfer exhibit significant spatial heterogeneity within hierarchical pores. The accessibility of acid sites and their utilization efficiency show substantial nanoscale variations and coking behavior following distinct spatiotemporal evolution patterns. The insights gained from the microscopic mechanistic studies provide theoretical foundations and clear optimization pathways for the precise design of industrial catalysts: For mass transfer optimization, constructing hierarchical pore systems and surface modifications can reduce the diffusion barriers. For acidity regulation, a synergistic approach is needed that precisely controls aluminum distribution and applies moderate steam treatment to balance the acid density, accessibility, and stability. In terms of anti-coking design, strategies such as shape-selective pore mouth passivation and crystal morphology control can effectively suppress the formation and deposition of the coke precursors.

Although fluorescence nanoscopy shows immense potential, its further advancement still faces several key challenges. Firstly, the technology heavily relies on the development of high-performance fluorescent probes, yet the probe molecules themselves may intrude and interfere with the actual reaction microenvironment. Secondly, despite being termed “super-resolution,” the spatial resolution (typically 20−50 nm) remains far below that of electron microscopy, limiting the direct atomic-level structural analysis. Thirdly, the technique has limitations in imaging depth and sample compatibility, performing poorly with opaque, thick, or highly scattering samples. Moreover, designing in situ reaction cells suitable for real industrial conditions such as high temperature and high pressure remains a significant challenge. Lastly, prolonged laser exposure can cause photobleaching and phototoxicity, leading to fluorescence signal decay and potential damage to the catalyst surface, thereby compromising the authenticity of observations.

Looking ahead, the technology will continue to evolve along the four key directions: firstly, multimodal integration (e.g. fluorescence-IR, fluorescence-Raman) will enable simultaneous analysis of catalyst structure, composition, and reaction activity. Secondly, the deep integration of high-speed dynamic imaging with machine learning algorithms will facilitate precise capture and performance prediction of dynamic catalytic processes. Thirdly, research systems will expand from traditional zeolites to emerging materials such as metal-zeolite bifunctional catalysts and MOFs. Finally, advancements in in situ characterization will drive the transition of research environments from idealized conditions to real operating scenarios. Through continuous technological innovation and mechanistic exploration, fluorescence nanoscopy is poised to play an increasingly pivotal role in the “on-demand design” of future high-performance industrial catalysts. It will complement and synergize with theoretical simulations and artificial intelligence, collectively advancing heterogeneous catalysis science from fundamental understanding to industrial application.

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

HESS F, SMARSLY B M, OVER H. Catalytic stability studies employing dedicated model catalysts[J]. Acc Chem Res, 2020, 53(2): 289−544.

PENG P, GAO X-H, YAN Z-F, et al. Diffusion and catalyst efficiency in hierarchical zeolite catalysts[J]. Nat Sci Rev, 2020, 7(11): 726−1742.

ROSTRUP-NIELSEN J R. Challenges to industrial catalysis[J]. Catal Today, 2022, 423: 113878.

ZHENG R, LIU Z, WANG Y, et al. Industrial catalysis: Strategies to enhance selectivity[J]. Chin J Catal, 2020, 41(7): 1032−1038.

GRUNEWALD G C, DRAGO R S. Carbon molecular sieves as catalysts and catalyst supports[J]. J Am Chem Soc, 1991, 113(5): 1475−872.

JIANG Z, CHEN D, DENG W, et al. Different morphological ZSM-5 zeolites supported Pt catalysts for toluene catalytic combustion[J]. Chem Phys Impact, 2022, 5: 100134.

KADJA G T M, AZHARI N J, MARDIANA S, et al. Recent advances in the development of nanosheet zeolites as heterogeneous catalysts[J]. Results Eng, 2023, 13(9): 5780−6485.

SONG S, SUN Y, YANG K, et al. Recent progress in metal-molecular sieve catalysts for propane dehydrogenation[J]. ACS Catal, 2023, 13(9): 6044−6067.

WANG F, WANG P, ZHANG J, et al. Deactivation mechanisms and anti-deactivation strategies of molecular sieve catalysts for NO_x reduction[J]. Chin Chem Lett, 2023, 35(3): 108800.

WANG L, DONG F, MENG Y, et al. Molecular sieve confined catalysts for the catalytic combustion of VOCs: Preparation, application and future development[J]. J Mater Chem A, 2025, 13(24): 18209−18252.

WANG S, WANG M, CUI H, et al. Mulberry-like hierarchical ZSM-5 zeolite supported MnSmO_x catalysts for catalytic oxidation of propane[J]. Appl Surf Sci, 2025, 706: 163535.

XING X, LIU L, ZHANG Y, et al. Mild modification of lignin pyrolysis vapors by metal oxide catalysts: A comparative study with molecular sieve catalysts[J]. Energy Sources Part A, 2023, 45(2): 5052−5062.

YUAN Y, GUAN B, CHEN J, et al. Research status and outlook of molecular sieve NH₃-SCR catalysts[J]. Mol Catal, 2024, 554: 113846.

ZHANG Y, LI Y, JIA C, et al. Research on stop-effect on the catalytic dehydration of ethanol over HZSM-5[J]. J Fuel Chem Technol, 2013, 41(12): 1495−1501.

BRASIL H, CARVALHO A L G D, COSTA F F, et al. Preparation of novel mesoporous Ca/P MCM-41-based materials for mechanochemical diphenyl sulfide oxidation[J]. 2020, 297: 110017.

CIMINO S, LISI L, ROMANUCCI S. Catalysts for conversion of ethanol to butanol: Effect of acid-base and redox properties[J]. Catal Today, 2017, 304: 58−63.

COLMENARES-ZERPA J, GONZÁLEZ G, GAJARDO J, et al. Revealing reaction conditions to drive the oxidation reaction of hydroxyacetone to lactic acid on Cu/ZrO₂ catalyst[J]. Top Catal, 2024, 68(11/12): 1171−1191.

GAO T-Y, ZHAO Y-H, ZHANG Q-J, et al. Zinc oxide modified HZSM-5 as an efficient acidic catalyst for hydrogen production by steam reforming of dimethyl ether[J]. React Kinet, Mech Catal, 2019, 128(1): 235−249.

HAN Y, WANG H, WANG L, et al. Research progress on the in-situ characterizations of iron-based FTS catalysts pretreatment process[J]. J Fuel Chem Technol, 2023, 51(4): 458−472.

JIANG Y, SUN X, ZHANG G, et al. Cerium-modified phosphomolybdenum heteropoly acid for selective oxidation of methylacrolein to methacrylic acid[J]. Fuel, 2023, 64(6): 3254−3263.

LI Y, HAN X, HOU Y, et al. In situ preparation of mesoporous iron titanium catalysts by a CTAB-assisted process for NO reduction with NH₃[J]. Appl Catal A: Gen, 2018, 559: 146−152.

QIAN H, ZHANG G, LI J, et al. Cerium-modified phosphomolybdenum heteropoly acid for selective oxidation of methylacrolein to methacrylic acid[J]. Ind Eng Chem Res, 2025, 64(6): 3254−3263.

REN S, MENG B, SUI X, et al. Preparation of mesoporous zeolite Y by fluorine-alkaline treatment for hydrocracking reaction of naphthalene[J]. Ind Eng Chem Res, 2019, 58(19): 7886−7891.

SUTTIPAT D, YUTTHALEKHA T, WANNAPAKDEE W, et al. Tunable acid-base bifunction of hierarchical aluminum-rich zeolites for the one-pot tandem deacetalization-Henry reaction[J]. 2019, 84(10): 1503−1507.

TOMITA S, YABUSHITA M, NAKAGAWA Y, et al. Hydrolysis of amide bonds in dipeptides and nylon 6 over a ZrO₂ catalyst[J]. Catal Sci Technol, 2024, 14(14): 3898−3908.

WANG P, YAO L, PU Y, et al. Low-temperature selective catalytic reduction of NO_x with NH₃ over an activated carbon-carbon nanotube composite material prepared by in situ method[J]. RSC Adv, 2019, 9(63): 36658−36663.

WANG T, HAN M, XIE J, et al. Mo-doping induced acidity modulation in mesoporous tin phosphate with enhanced recyclability for catalyzing toluene alkylation with benzyl chloride[J]. React Kinet, Mech Catal, 2025, 138: 3639−3704.

WU H, ZHANG W, LIU Y, et al. One-step control of Brønsted acid sites and oxygen vacancies in Mn-based perovskite for boosting catalytic oxidation of chlorobenzene[J]. J Environ Chem Eng, 2023, 11(3): 110210.

ZHOU W, JIANG Y, SUN Z, et al. Support effect of Ga-based catalysts in the CO₂-assisted oxidative dehydrogenation of propane[J]. Catalysts, 2023, 13(5): 896.

JI Y, YANG H, YAN W. Strategies to enhance the catalytic performance of ZSM-5 zeolite in hydrocarbon cracking: a review[J]. Catalysts, 2017, 7(12): 367.

WANG H, MAO W, WANG K, et al. Insight into the effects of mass transfer performance of Y zeolite on the product selectivity of VGO hydrocracking[J]. Ind Eng Chem Res, 2022, 61(2022): 18270−18281.

XU G, GAO X, LUO T, et al. A convenient synthesis of core-shell ZSM-5@ZnO catalysts for methane co-aromatization with propane[J]. New J Chem, 2022, 46(35): 16990−16997.

ZHU Z-J, HE Z-H, TIAN Y, et al. Mass-transfer enhancement in the CO₂ oxidative dehydrogenation of propane over GaN supported on zeolite nanosheets with a short b-axis and hierarchical pores[J]. ACS Catal, 2024, 14(13): 10376−10391.

TARACH K A, AKOUCHE M, PYRA K, et al. Polypropylene cracking on embryonic and ZSM-5 catalysts – An operando study[J]. Appl Catal B: Environ, 2023, 3334: 122871.

WECKHUYSEN B M. Solid catalysts under the spotlight[J]. Nat Catal, 2018, 1(2): 101−102.

FU D, MARIS J J E, STANCIAKOVA K, et al. Unravelling channel structure–diffusivity relationships in zeolite ZSM-5 at the single-molecule level[J]. Angew Chem Int Ed, 2022, 61(5): e202114388.

GOETZE J, WECKHUYSEN B M. Spatiotemporal coke formation over zeolite ZSM-5 during the methanol-to-olefins process as studied with operando UV-vis spectroscopy: A comparison between H-ZSM-5 and Mg-ZSM-5[J]. Catal Sci Technol, 2018, 8(6): 1632−1644.

CHIA C-M, WANG H-C, YEH J A, et al. Multiplexed holographic non-axial-scanning slit confocal fluorescence microscopy[J]. Opt Express, 2018, 26(11): 14288−14294.

GAMBINO M, NIEUWELINK A E, REINTS F, et al. Mimicking industrial aging in fluid catalytic cracking: a correlative microscopy approach to unravel inter-particle heterogeneities[J]. J Catal, 2021, 404: 634−646.

GAMBINO M, VESELÝ M, FILEZ M, et al. Nickel poisoning of a cracking catalyst unravelled by single-particle X-ray fluorescence-diffraction-absorption tomography[J]. Angew Chem, Int Ed, 2019, 59(10): 3922−3927.

HUANG B, LI J, YAO B, et al. Enhancing image resolution of confocal fluorescence microscopy with deep learning[J]. 2023, 4(1): 2.

JANG Y J, NAUNDORF C, KLAPPER M, et al. Study of the fragmentation process of different supports for metallocenes by laser scanning confocal fluorescence microscopy (LSCFM)[J]. Macromol Chem Phys, 2005, 206(20): 2027−2037.

LEENHEER A J, ATWATER H A. Imaging water-splitting electrocatalysts with pH-sensing confocal fluorescence microscopy[J]. J Electrochem Soc, 2012, 159(9): H752−H757.

VERKLEIJ S P, WHITING G T, ESCLAPEZ S P, et al. Operando micro-spectroscopy on ZSM-5 containing extrudates during the oligomerization of 1-hexene[J]. Catal Sci Technol, 2018, 8(8): 2175−2185.

VERKLEIJ S P, WHITING G T, PIEPER D, et al. Chemical imaging of the binder-dependent coke formation in zeolite-based catalyst bodies during the transalkylation of aromatics[J]. 2019, 11(19): 4788−4796.

WERNY M J, SIEBERS K B, FRIEDERICHS N H, et al. Advancing the compositional analysis of olefin polymerization catalysts with high-throughput fluorescence microscopy[J]. J Am Chem Soc, 2022, 144(56): 21287−21294.

ZHANG Z. Research on parallel detection-based differential super-resolution microscopy method and system[D]. Hangzhou: Zhejiang University, 2021.

SHENG Z. High-resolution laser confocal/differential confocal sample scanning microscopic imaging technology and system[D]. Bejing: Beijing Institute of Technology, 2017.

AFFANNOUKOUÉ K, LABOUESSE S, MAIRE G, et al. Super-resolved total internal reflection fluorescence microscopy using random illuminations[J]. Optica, 2023, 10(8): 1009−1017.

FAN Z, KUAI Y, TANG X, et al. Chip-based wide field-of-view total internal reflection fluorescence microscopy[J]. Opt Lett, 2022, 47(17): 4303−4306.

MOCHALOV K E, AGAPOVA O I, AGAPOV I I, et al. 3D TIRF microscopy: Combination of the total internal reflection fluorescence microscopy and ultramicrotomy techniques[J]. Opt Laser Eng, 2025, 188: 108891.

WANG W-K, CHEN J-J, LOU Z-Z, et al. Single-molecule and -particle probing crystal edge/corner as highly efficient photocatalytic sites on a single TiO₂ particle[J]. Proc Natl Acad Sci U S A, 2019, 116(38): 18827−18833.

YAN C, MEI X, GONG X, et al. Practical applications of total internal reflection fluorescence microscopy for nanocatalysis[J]. Ind Chem Mater, 2023, (1): 85−89.

FREDERICE R, LENCIONE D, GEHLEN M H. Imaging the photoinduced charge injection in CdS/TiO₂ nanoparticles by the sequential fluorescence mapping method[J]. MAF, 2017, 5(1): 1−6.

SAMANTA S, GONG W, LI W, et al. Organic fluorescent probes for stochastic optical reconstruction microscopy (STORM): Recent highlights and future possibilities[J]. Coord Chem Rev, 2019, 380: 17−34.

TAM J, MERINO D. Stochastic optical reconstruction microscopy (STORM) in comparison with stimulated emission depletion (STED) and other imaging methods[J]. J Neurochem, 2015, 135(4): 643−658.

TEHRANI K F, ZHANG Y, SHEN P, et al. Adaptive optics stochastic optical reconstruction microscopy (AO-STORM) by particle swarm optimization[J]. Biomed Opt Express, 2017, 8(11): 5087−5097.

XU J, MA H, LIU Y. Stochastic Optical Reconstruction Microscopy (STORM)[J]. Curr Protoc Cytom, 2017, 81(1): 12.46. 1−12.46. 27.

RISTANOVIĆ Z, KERSSENS M M, KUBAREV A V, et al. High-resolution single-molecule fluorescence imaging of zeolite aggregates within real-life fluid catalytic cracking particles[J]. Angew Chem, 2014, 54(6): 1836−1840.

LóPEZ P A, BLUM S A. Fluorescence lifetime imaging microscopy (FLIM) as a tool to understand chemical reactions and catalysis[J]. ACS Catal, 2024, 14(22): 17132−17147.

OLEKSIIEVETS N, THIELE J C, WEBER A, et al. Wide-field fluorescence lifetime imaging of single molecules[J]. J Phys Chem A, 2020, 124(17): 3301−3500.

SHEN M, RACKERS W H, SADTLER B. Getting the most out of fluorogenic probes: Challenges and opportunities in using single-molecule fluorescence to image electro- and photocatalysis[J]. Chem Biomed Imaging, 2023, 1(8): 670−766.

XIAO Y, XU W. Single-molecule fluorescence imaging of nanocatalysis[J]. Chin J Chem, 2021, 39(6): 1459−1470.

XIAO Y, XU W. Single-molecule fluorescence imaging for probing nanocatalytic process[J]. Chem, 2022, 9(1): 16−28.

ZHANG S, FAN D, YAN Q, et al. Single-molecule fluorescence imaging of photocatalytic nanomaterials[J]. J Mater Chem A, 2024, 12(31): 19627−19662.

ZüRNER A, KIRSTEIN J, DÖBLINGER M, et al. Visualizing single-molecule diffusion in mesoporous materials[J]. Nature, 2007, 119(46): 26101−10.

HENDRIKS F C, MOHAMMADIAN S, RISTANOVIĆ Z, et al. Integrated transmission electron and single-molecule fluorescence microscopy correlates reactivity with ultrastructure in a single catalyst particle[J]. Angew Chem Int Ed, 2017, 57(1): 257−261.

KUMAR N, KALIRAI S, WAIN A J, et al. Nanoscale chemical imaging of a single catalyst particle with tip‐enhanced fluorescence microscopy[J]. ChemCatChem, 2018, 11(1): 417−423.

REIS I F, FOLTRAN L S, LAUER M H, et al. Reactive phenanthrene derivatives as markers of amino groups in fluorescence microscopy of surface modified micro-zeolite L[J]. J Fluoresc, 2021, 31(5): 1417−1424.

LI B, ZHANG X, LV M, et al. Imaging charge carrier transfer in facet-dependent semiconductor photocatalysts by single-particle fluorescence spectroscopy[J]. Sci China Chem, 2024, 68(5): 1794−1809.

WANG R, WANG H, XIONG X, et al. Visualization analysis of mass transfer enhancement on active site utilization efficiency in FCC catalysts[J]. CIESC J, 2024, 75(9): 3198−3209.

ZHANG L, HU Q, QIN Y, et al. Optimizing the accessibility of zeolite Y on FCC catalyst to improve heavy oil conversion capacity[J]. Microporous Mesoporous Mater, 2023, 359: 112627.

KARWACKI L, WECKHUYSEN B M. New insight in the template decomposition process of large zeolite ZSM-5 crystals: An in situ UV-Vis/fluorescence micro-spectroscopy study[J]. Phys Chem Chem Phys, 2010, 13(9): 3681−3685.

ZHU X, KOSINOV N, HOFMANN J P, et al. Fluoride-assisted synthesis of bimodal microporous SSZ-13 zeolite[J]. Chem Commun, 2016, 52(15): 3227−3230.

HENDRIKS F C, SCHMIDT J E, ROMBOUTS J A, et al. Probing zeolite crystal architecture and structural imperfections using differently sized fluorescent organic probe molecules[J]. Chem-Eur J, 2017, 23(26): 6305−6314.

PENG S, LI H, LIU W, et al. Reaction rate enhancement by reducing surface diffusion barriers of guest molecules over ZSM-5 zeolites: A structured illumination microscopy study[J]. Chem Eng J, 2021, 61(30): e202203903.

PENG S, XIE Y, WANG L, et al. Exploring the influence of inter-and intra-crystal diversity of surface barriers in zeolites on mass transport by using super-resolution microimaging of time-resolved guest profiles[J]. Angew Chem Int Ed, 2022, 61(30): e202203903.

HENDRIKS F C, MEIRER F, KUBAREV A V, et al. Single-molecule fluorescence microscopy reveals local diffusion coefficients in the pore network of an individual catalyst particle[J]. J Am Chem Soc, 2017, 139(39): 13632−13635.

PARK M, AHN Y, CHO J, et al. Real-time visualisation of reaction kinetics and dynamics: Single-molecule insights into the iminium-catalysed Diels-Alder reaction[J]. Angew Chem Int Ed, 2025, 64(45): e202506535.

REIS I F, GEHLEN M H. Exploring the dynamics of Suzuki-Miyaura cross-coupling reactions via single-molecule fluorescence microscopy: Catalytic efficiency from SM-TOF measurements[J]. J Phys Chem C, 2025, 12(8): 4052−4058.

CHEN C, GUAN H, ZHOU J, et al. Visualization analysis of the mass transfer optimization mechanism of alkali-modified ZSM-5 zeolite[J]. J Solid State Chem, 2025, 350: 125421.

BUURMANS I L C, RUIZ-MARTÍNEZ J, KNOWLES W V, et al. Catalytic activity in individual cracking catalyst particles imaged throughout different life stages by selective staining[J]. Nat Chem, 2011, 3(11): 862−867.

SPRUNG C, WECKHUYSEN B M. Differences in the location of guest molecules within zeolite pores as revealed by multilaser excitation confocal fluorescence microscopy: Which molecule is where?[J]. J Am Chem Soc, 2015, 137(5): 1705−2138.

YI X, LIU S, ZHAO T, et al. Temperature-programmed desorption of single zeolite nanoparticles[J]. J Am Chem Soc, 2024, 146(48): 32979−32988.

CHEN C, GUAN H, ZHOU J, et al. Visualizing acid site accessibility in hierarchical ZSM-5 zeolites through super-resolution fluorescence imaging[J]. Appl Catal A: Gen, 2025, 707: 120498.

YU L, ZHANG L, DUAN H, et al. Dynamic fluorescence imaging deciphers the particle size-acid accessibility trade-off in FCC catalysts toward optimized synthesis[J]. J Mater Sci, 2025, 60(35): 15724−15736.

STAVITSKI E, KOX M H F, WECKHUYSEN B M. Revealing shape selectivity and catalytic activity trends within the pores of H-ZSM-5 crystals by time- and space-resolved optical and fluorescence microspectroscopy[J]. Chem-Eur J, 2007, 13(25): 7057−7065.

RISTANOVIĆ Z, HOFMANN J P, DE CREMER G, et al. Quantitative 3D fluorescence imaging of single catalytic turnovers reveals spatiotemporal gradients in reactivity of zeolite H-ZSM-5 crystals upon steaming[J]. J Am Chem Soc, 2015, 137(20): 6559−6568.

VOLLMER I, JENKS M J F, REJMAN S, et al. Correction: Unravelling potential reaction intermediates during catalytic pyrolysis of polypropylene with microscopy and spectroscopy[J]. Catal Sci Technol, 2024, 14(8): 2305.

MORES D, KORNATOWSKI J, OLSBYE U, et al. Coke formation during the methanol-to-olefin conversion: In situ microspectroscopy on individual H-ZSM-5 crystals with different Brønsted acidity[J]. Chem-Eur J, 2011, 17(10): 2874−2884.

BIENZ S, VAN VREESWIJK S H, PANDEY Y, et al. Probing coke formation during the methanol-to-hydrocarbon reaction on zeolite ZSM-5 catalyst at the nanoscale using tip-enhanced fluorescence microscopy[J]. Catal Sci Technol, 2022, 12(19): 5795−5801.

GAO S, XU S, WEI Y, et al. Insight into the deactivation mode of methanol-to-olefins conversion over SAPO-34: Coke, diffusion, and acidic site accessibility[J]. J Catal, 2018, 367: 306−314.

WIEDEMANN S C C, RISTANOVIC Z, WHITING G T, et al. Large ferrierite crystals as models for catalyst deactivation during skeletal isomerisation of oleic acid: evidence for pore mouth catalysis[J]. Chem-Eur J, 2016, 22(1): 199−210.

ZHANG Q, JIANG Z, ZHANG Y, et al. Deciphering transient carbon footprint for methane dry reforming over Ni@S-1 nanosheet zeolite catalyst[J]. Appl Catal B: Environ, 2024, 362: 124722.

VAN VREESWIJK S H, PARKER L A, MARIS J J E, et al. Micro- and nanoscale heterogeneities in zeolite Beta as measured by atom probe tomography and confocal fluorescence microscopy[J]. ChemPhysChem, 2023, 24(13): e202300094.

2026年第54卷第5期

PDF下载

197

引用本文

BibTeX

文章信息

doi: 10.1016/S1872-5813(26)60652-4

接收时间：2025-10-30
首发时间：2026-09-23
出版时间：2026-05-10

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2025-10-30
修回日期：2025-12-05
录用日期：2025-12-29

基金

作者信息

¹辽宁石油化工大学石油化工学院辽宁省石油化工催化科学与技术重点实验室, 辽宁抚顺 113000

²中国石油兰州石化公司, 甘肃兰州 730060

³中国石油石油化工研究院兰州化工研究中心, 甘肃兰州 730060

通讯作者:

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/rlhxxb/CN/10.1016/S1872-5813(26)60652-4

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT