Article(id=1242139161835151506, tenantId=1146029695717560320, journalId=1146031591421210625, issueId=1242139102942929861, articleNumber=null, orderNo=11, doi=10.3981/j.issn.1000-7857.2021.09.004, pmid=null, cstr=null, oa=null, hot=null, price=null, onlineType=0, articleFormat=0, articleType=null, articleTypeStr=null, receivedDate=1590076800000, receivedDateStr=2020-05-22, revisedDate=1595952000000, revisedDateStr=2020-07-29, acceptedDate=null, acceptedDateStr=null, onlineDate=1623148872237, onlineDateStr=2021-06-08, pubDate=1620835200000, pubDateStr=2021-05-13, doiRegisterDate=null, doiRegisterDateStr=null, onlineIssueDate=1623148872237, onlineIssueDateStr=2021-06-08, onlineJustAcceptDate=null, onlineJustAcceptDateStr=null, onlineFirstDate=null, onlineFirstDateStr=null, sourceXml=null, magXml=null, createTime=1774078654008, creator=sys-migrate, updateTime=1774078654008, updator=sys-migrate, issue=Issue{id=1242139102942929861, tenantId=1146029695717560320, journalId=1146031591421210625, year='2021', volume='39', issue='9', pageStart='1', pageEnd='135', issueExtLink='null', onlineDate='null', pubDate='1620835200000', pubDateStr='2021-05-13', beforeIssueId=null, nextIssueId=null, price=null, status=1, issueComplete=1, articleOrder=3, issueType=-1, specialIssue=null, createTime=1774078639966, creator='sys-migrate', updateTime=1774078639966, updator='sys-migrate', preIssue=null, nextIssue=null, articleTotal=null, ext=null, issueFiles=null, downloadFileDto=null}, startPage=36, endPage=47, ext={EN=ArticleExt(id=1242139170857103967, articleId=1242139161835151506, tenantId=1146029695717560320, journalId=1146031591421210625, language=EN, title=Effects of heat treatment on microstructure, properties, and residual stress of additive manufactured AlSi10Mg alloy, columnId=1242139157280141858, journalTitle=Science & Technology Review, columnName=Exclusive: Aircraft materials and manufacture technology, runingTitle=null, highlight=null, articleAbstract=Residual stress, always existing in additive manufactured AlSi10Mg alloy, has negative effects on its application. Therefore, it is needed to be controlled or even eliminated by heat treatment. The microstructure, properties and residual stress of as built and annealed alloys are investigated using X ray diffraction, optical microscope, field emission scanning electron microscope, transmission electron microscope, electron backscattered diffraction, microhardness and Raman spectrum tests. The results show that as built alloy consists of supersaturated Al solid solution and Si phase. Additionally, the Si phase exists in the forms of cellular eutectic silicon and dispersed silicon nanoparticles. Meanwhile, the grain size of as built alloy is relatively fine, and the d 50 value of grain size distribution is about 10.4 μm. Annealing treatments lead to the depositions of alloying elements from supersaturated Al solid solution, and formations of equilibrium phase Mg2 Si and Si phase as the annealing temperature ranging from 250℃ to 300℃. With the increase of annealing temperature, the alloying elements precipitate out more thoroughly. Furthermore, the coarsening of cellular eutectic silicon and silicon nanoparticles, grain growth and recrystallization also occur owing to annealing treatment. Because of the decline of fine grain strengthening, solid solution strengthening and dispersion strengthening after annealing treatment, the microhardness decreases. The residual stress, however, can be significantly reduced by annealing process with a reduction of 60%~80%. Consequently, it is necessary to develop new heat treatment system according to the characteristic of additive manufactured aluminum alloy, in order to regulate and control the microstructure and properties., authors=TANG Pengjun1,2,3 , CHEN Bingqing2 , YAN Taiqi2 , CHU Ruikun4 , GUO Shaoqing2 , LI Peiyong1,2,3 , authorsList=TANG Pengjun, CHEN Bingqing, YAN Taiqi, CHU Ruikun, GUO Shaoqing, LI Peiyong, authorCompany=1. Institute of Aluminum Alloys, AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China;d 50 值约为10.4 μm。250~300℃退火使合金元素从过饱和Al固溶体中析出，形成平衡相Mg2 Si和Si相；且随着退火温度升高，合金元素析出越彻底。此外，退火还引起网状共晶硅和纳米硅颗粒粗化，促使晶粒长大并诱发再结晶。由于退火后合金中的细晶强化、固溶强化和弥散强化效果减弱，故合金的维氏硬度下降。然而，退火可以显著降低合金的残余应力，下降幅度达到60%~80%。因此，为更好地实现组织和性能调控，有必要针对增材制造铝合金的特点开发新的热处理制度。, authors=唐鹏钧1,2,3 , 陈冰清2 , 闫泰起2 , 楚瑞坤4 , 郭绍庆2 , 李沛勇1,2,3 , authorsList=唐鹏钧, 陈冰清, 闫泰起, 楚瑞坤, 郭绍庆, 李沛勇, authorCompany=1. 中国航发北京航空材料研究院铝合金研究所, 北京 100095;
科技导报
| 专题：飞机材料及制造技术 2021, 39(9): 36-47
热处理对增材制造AlSi10Mg合金组织性能及残余应力的影响
全屏
唐鹏钧, 陈冰清, 闫泰起, 楚瑞坤, 郭绍庆, 李沛勇
作者信息
通讯作者:
陈冰清(通信作者),研究员,研究方向为增材制造,电子信箱:hwtkjcbq1984@163.com
Effects of heat treatment on microstructure, properties, and residual stress of additive manufactured AlSi10Mg alloy
TANG Pengjun, CHEN Bingqing, YAN Taiqi, CHU Ruikun, GUO Shaoqing, LI Peiyong
Affiliations
出版时间: 2021-05-13
doi: 10.3981/j.issn.1000-7857.2021.09.004
文章导航
增材制造AlSi10Mg合金通常存在较大的残余应力，对材料的服役使用产生不利影响，故需要采用热处理对残余应力予以控制甚至消除。利用X射线衍射、光学显微镜、场发射扫描电子显微镜、透射电子显微镜、背散射电子衍射、维氏硬度和拉曼光谱试验，研究了成形态和退火态合金的显微组织、性能及残余应力。结果表明，成形态合金由过饱和Al固溶体和Si相组成，其中， Si相以网状共晶硅和弥散分布的纳米硅颗粒2种形态存在。同时，成形态合金的晶粒细小，其晶粒尺寸分布的d 50 值约为10.4 μm。250~300℃退火使合金元素从过饱和Al固溶体中析出，形成平衡相Mg2 Si和Si相；且随着退火温度升高，合金元素析出越彻底。此外，退火还引起网状共晶硅和纳米硅颗粒粗化，促使晶粒长大并诱发再结晶。由于退火后合金中的细晶强化、固溶强化和弥散强化效果减弱，故合金的维氏硬度下降。然而，退火可以显著降低合金的残余应力，下降幅度达到60%~80%。因此，为更好地实现组织和性能调控，有必要针对增材制造铝合金的特点开发新的热处理制度。
增材制造
/
AlSi10Mg合金
/
热处理
/
显微组织
/
残余应力
Residual stress, always existing in additive manufactured AlSi10Mg alloy, has negative effects on its application. Therefore, it is needed to be controlled or even eliminated by heat treatment. The microstructure, properties and residual stress of as built and annealed alloys are investigated using X ray diffraction, optical microscope, field emission scanning electron microscope, transmission electron microscope, electron backscattered diffraction, microhardness and Raman spectrum tests. The results show that as built alloy consists of supersaturated Al solid solution and Si phase. Additionally, the Si phase exists in the forms of cellular eutectic silicon and dispersed silicon nanoparticles. Meanwhile, the grain size of as built alloy is relatively fine, and the d 50 value of grain size distribution is about 10.4 μm. Annealing treatments lead to the depositions of alloying elements from supersaturated Al solid solution, and formations of equilibrium phase Mg2 Si and Si phase as the annealing temperature ranging from 250℃ to 300℃. With the increase of annealing temperature, the alloying elements precipitate out more thoroughly. Furthermore, the coarsening of cellular eutectic silicon and silicon nanoparticles, grain growth and recrystallization also occur owing to annealing treatment. Because of the decline of fine grain strengthening, solid solution strengthening and dispersion strengthening after annealing treatment, the microhardness decreases. The residual stress, however, can be significantly reduced by annealing process with a reduction of 60%~80%. Consequently, it is necessary to develop new heat treatment system according to the characteristic of additive manufactured aluminum alloy, in order to regulate and control the microstructure and properties.
additive manufacturing
/
AlSi10Mg alloy
/
heat treatment
/
microstructure
/
residual stress
唐鹏钧, 陈冰清, 闫泰起, 楚瑞坤, 郭绍庆, 李沛勇.
热处理对增材制造AlSi10Mg合金组织性能及残余应力的影响.
科技导报,
2021
, 39
(9)
: 36
-47
.
DOI: 10.3981/j.issn.1000-7857.2021.09.004
TANG Pengjun, CHEN Bingqing, YAN Taiqi, CHU Ruikun, GUO Shaoqing, LI Peiyong.
Effects of heat treatment on microstructure, properties, and residual stress of additive manufactured AlSi10Mg alloy[J].
Science & Technology Review ,
2021
, 39
(9)
: 36
-47
.
DOI: 10.3981/j.issn.1000-7857.2021.09.004
2021年第39卷第9期
PDF下载
443
92
引用本文
BibTeX
文章信息
doi: 10.3981/j.issn.1000-7857.2021.09.004
接收时间：2020-05-22
首发时间：2021-06-08
出版时间：2021-05-13
收稿日期：2020-05-22
修回日期：2020-07-29
通讯作者:
陈冰清(通信作者),研究员,研究方向为增材制造,电子信箱:hwtkjcbq1984@163.com
https://castjournals.cast.org.cn/joweb/kjdb/CN/10.3981/j.issn.1000-7857.2021.09.004
引用本文
BibTeX
2种不同金属材料的力学参数
科 属数 种数 占总种数比例 属 种数 占总种数比例 鹅膏菌科Amanitaceae 2 11 5.26 鹅膏菌属 Amanita 10 4.78 小菇科 Mycenaceae 2 12 5.74 丝盖伞属 Inocybe 5 2.39 多孔菌科 Polyporaceae 8 14 6.70 蜡蘑属 Laccaria 5 2.39 红菇科 Russulaceae 3 23 11.00 小皮伞属 Marasmius 6 2.87 小菇属 Mycena 11 5.26 光柄菇属 Pluteus 5 2.39 红菇属 Russula 17 8.13 栓菌属 Trametes 5 2.39
关闭全屏
BibTeX
EndNote
RefWorks
TxT
PDF下载
全屏
443
92
关闭全屏
北京市海淀区学院南路86号
010-62199257
qkjq@cast.org.cn
