科技导报

TiN晶体尺寸与其力学性能的第一性原理研究

PDF下载

科技导报 | 研究论文 2011,29(30): 33-36

收起

科技导报 | 研究论文 2011, 29(30): 33-36

TiN晶体尺寸与其力学性能的第一性原理研究

全屏

刘学杰, 张安萍, 姜永军, 陈小强, 贾慧灵

作者信息

Grain Size Effect on the Mechanical Properties of TiN: First-Principle Studies

Affiliations

出版时间: 2011-10-28 doi: 10.3981/j.issn.1000-7857.2011.30.003

文章导航

摘要

收起

纳米多晶体材料因其独特的力学性能而成为当前材料科学领域的研究热点之一,尤其是晶粒尺寸对其力学性能的影响倍受关注。本文采用基于密度泛函理论的第一性原理方法,模拟计算了晶粒尺寸为0.6387—2.332nm的TiN的力学性能,得到应力应变关系及屈服强度。计算结果表明,随着晶粒尺寸的增加,TiN的屈服强度降低,晶粒呈现软化趋势。通过对应力-应变曲线分析可知：TiN在应变5%处开始屈服,其屈服强度大约为21.5GPa;抗拉强度发生在应变约为15%时,且随着晶粒尺寸的增加,抗拉强度降低。本文对照了屈服极限的计算值和有限元方法的拟合值,讨论了实验中TiN表面的微观结构与硬度、弹性模量的关系。研究表明,TiN试样中的缺陷对其硬度和强度有很大影响。

关键词

第一性原理 / 晶粒尺寸 / TiN / 屈服强度

Abstract

收起

Nanoscale polycrystalline materials with unique mechanical properties become now a hot issue in the field of materials science. One of the research focuses is the grain size effect on the material mechanical properties. In this paper, the grain size effect of TiN nanocrystals is studied with the first principle method based on the density functional theory. The total energies of a series of TiN crystals with different grain sizes ranging from 0.6387nm to 2.332nm are calculated by means of the first principle method to reveal their mechanical properties in the case of simple tension. The calculation results include the strain-stress relationships and the related yield strength. The strain-stress curves show that the yield strength of TiN crystal decreases with the increase of the grain size. That means that the TiN crystal trends to softening as the result of the increase of the grain size. The stress-strain curve indicates also that TiN crystal begins to yield at the tensile strain of 5%, and the yield strength is about 21.5GPa. The TiN crystal has the highest tensile strength at approximately 15% of the tensile strain. As the grain size increases, the tensile strength of TiN decreases. The correlation between the microstructure of TiN and their hardness and elastic properties is discussed, which indicates that besides the grain size effect, the defects in the TiN film is a crucial factor that affects their hardness and strength.

Key words

first principles / grain size / TiN / yield strength

引用本文

刘学杰;张安萍;姜永军;陈小强;贾慧灵. TiN晶体尺寸与其力学性能的第一性原理研究. 科技导报, 2011 , 29 (30) : 33 -36 . DOI: 10.3981/j.issn.1000-7857.2011.30.003

LIU Xuejie;ZHANG Anping;JIANG Yongjun;CHEN Xiaoqiang;JIA Huiling. Grain Size Effect on the Mechanical Properties of TiN: First-Principle Studies[J]. Science & Technology Review, 2011 , 29 (30) : 33 -36 . DOI: 10.3981/j.issn.1000-7857.2011.30.003

参考文献

收起

2011年第29卷第30期

PDF下载

336

引用本文

BibTeX

文章信息

doi: 10.3981/j.issn.1000-7857.2011.30.003

接收时间：2011-09-23
首发时间：2011-10-28
出版时间：2011-10-28

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2011-09-23
修回日期：2011-10-10

基金

作者信息

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/kjdb/CN/10.3981/j.issn.1000-7857.2011.30.003

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT