硅酸盐学报

具有形状记忆效应的陶瓷前驱体光固化4D打印与性能调控

PDF下载

马俊鹏 ¹ , 吴敬文 ¹ , 刘飞腾 ¹ , 魏琦 ¹ , 田恩浩 ¹ , 屈鹏 ¹ , 王绍清 ¹ , 郭帅 ² , 李红双 ¹ , 郭琳 ³ , 吴甲民 ³ , 郭安福 ¹

硅酸盐学报 | 研究论文 2026,54(9): 2950-2960

收起

硅酸盐学报 |研究论文 2026 , 54 (9) : 2950 -2960

具有形状记忆效应的陶瓷前驱体光固化4D打印与性能调控

全屏

马俊鹏¹, 吴敬文¹, 刘飞腾¹, 魏琦¹, 田恩浩¹, 屈鹏¹, 王绍清¹, 郭帅², 李红双¹, 郭琳³, 吴甲民³, 郭安福¹

作者信息

^1．聊城大学机械与汽车工程学院，山东聊城 252000

^2．聊城大学材料科学与工程学院，山东聊城 252000

^3．华中科技大学材料科学与工程学院，材料成形与模具技术全国重点实验室，武汉 430074

通讯作者:

郭安福（1978—），男，博士，教授。

作者简介:

马俊鹏（2001—），男，硕士研究生。

Photopolymerization-Based 4D Printing of Ceramic Precursors with Shape Memory and Tunable Performance

Junpeng MA¹, Jingwen WU¹, Feiteng LIU¹, Qi WEI¹, Enhao TIAN¹, Peng QU¹, Shaoqing WANG¹, Shuai GUO², Hongshuang LI¹, Lin GUO³, Jiamin WU³, Anfu GUO¹

Affiliations

^1.School of Mechanical and Automotive Engineering, Liaocheng University, Liaocheng 252000, Shandong, China

^2.School of Materials Science and Engineering, Liaocheng University, Liaocheng 252000, Shandong, China

^3.School of Materials Science and Engineering, State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China

Corresponding Author:

{GUO} Anfu (1978-), male,Ph.D.,Professor. E-mail: guoanfu@lcu.edu.cn

MA Junpeng (2001-), male, Master candidate. E-mail: 18864988762@163.com

出版时间: 2026-08-18 doi: 10.14062/j.issn.0454-5648.20260084

文章导航

摘要

收起

4D打印在3D打印基础上引入时间维度，使结构能在外界刺激下发生形状或结构变化，拓展了复杂构型的制造潜力，但陶瓷的脆性与刚性制约了陶瓷4D打印的发展。本工作采用光固化4D打印技术，制备了具有形状记忆功能的氧化铝陶瓷前驱体结构。通过配制含纳米氧化铝颗粒的陶瓷浆料，系统分析其流变性能，实现了基于立体光刻技术的高精度打印。结果表明，所制备的陶瓷浆料具有良好的剪切稀化行为，适合用于光固化打印。打印成型的陶瓷前驱体表现出显著的形状记忆特性，形状固定率与形状恢复率分别可达约97%和98%，并可通过热刺激实现可控的形状重构与恢复。通过焦耳热驱动实现了前驱体结构的形状恢复行为，初步展示了其在航空航天智能铰链等领域的应用潜力。此外，热重-差示扫描量热分析为脱脂与烧结工艺提供了依据，经热处理后成功获得结构完整的致密氧化铝陶瓷。本工作为陶瓷材料的4D打印与形状记忆结构设计提供了可行的技术途径。

关键词

光固化 / 4D打印 / 陶瓷前驱体 / 形状记忆

Abstract

收起

Introduction

Four-dimensional (4D) printing, as an advanced additive manufacturing technology, enables the fabricated structures to undergo programmable shape or performance changes over time in response to external stimuli. This technology has a significant application potential in aerospace, communication, and biomedical engineering. However, achieving ceramic structures with high precision, complex shapes, and excellent shape memory functionality remains a major challenge. The main difficulty lies in the inability to formulate ceramic slurry suitable for high-resolution printing and precisely controlling the shape memory behavior of the printing precursors and the sintering process. To address these challenges, this study was to use a photopolymerization 4D printing technique to prepare alumina ceramic precursors with shape memory effects. An effective printing of ceramic specimens was ensured via formulating high-solid-content ceramic slurry and optimizing their rheological properties. The shape memory performance was characterized, and the debinding and sintering strategy was adopted based on the results of thermal analysis to obtain dense and crack-free ceramic parts. Also, the shape recovery was achieved through Joule heating, having an application potential of the ceramic precursors in aerospace intelligent hinges. This study could provide a feasible technical approach for designing and manufacturing shape memory ceramic structures through 4D printing and offer practical methods for developing advanced intelligent ceramic components.

Methods

For the preparation of the ceramic slurry, polyurethane acrylate, acrylic isoprene ester, and ethyl (2,4,6-trimethylbenzoyl) phenylphosphoric acid ester were mixed in a weight ratio of 51∶45∶4 to prepare the shape memory polymer (SMP) resin. Afterwards, the SMP resin was mixed with alumina powder in a weight ratio of 55∶45, and was stirred by a mechanical mixer under heating and ultrasonic vibration for 30 min to obtain a uniform ceramic slurry. The rheological properties of the slurry were tested using a rotational rheometer. The 3D printing was completed by a vat photopolymerization (VPP) printer, with the process parameters including a layer thickness of 50 μm, a laser power of 100 mW, and a scanning interval of 0.03 mm. To characterize the shape memory performance, the rectangular samples (1.5 mm×5.0 mm×30.0 mm) were heated at 80 ℃ to deform, and then cooled to 25 ℃ to fix the temporary shape. The shape fixation rate (R_f) and shape recovery rate (R_r) were calculated based on the shape fixation angle and shape recovery angle, and 10 cycles of tests were conducted. The glass transition temperature (T_g) of the printed precursor was determined by a dynamic thermal mechanical analyzer (DMA). The chemical structure evolution before and after curing was analyzed by Fourier transform infrared spectroscopy (FTIR). The potential applications in fields such as aerospace intelligent hinges were initially demonstrated under the influence of Joule heating. The temperature rise rate was tested by thermogravimetric differential scanning calorimetry (TG-DSC) in a nitrogen environment at a rate of 10 ℃ per minute, starting from 30 ℃ to 800 ℃, to guide the debinding and sintering processes.

Results and discussion

The prepared ceramic slurry exhibits a distinct shear-thinning behavior, with decreasing viscosity significantly as the shear rate increases, making it suitable for use in UV photopolymerization-based printers. The dynamic thermomechanical analysis reveals a glass transition temperature (T_g) of approximately 76.24 ℃ for the ceramic precursor. The printed precursor demonstrates excellent shape memory properties, achieving R_f and R_r rates of approximately 97% and 98%, respectively, for 10 test cycles, confirming stable and reliable shape memory performance. The Fourier transform infrared spectra confirm that the ceramic slurry successfully undergoes a photopolymerization and forms a cross-linked network. Furthermore, complex structures such as box and flower models are successfully printed, and they show the excellent shape recovery under thermal stimulation, highlighting a flexibility of this process for fabricating intricate shapes. The study utilizes the Joule heating as an external stimulus to drive shape recovery, demonstrating a potential of ceramic precursor as an intelligent hinge for aerospace applications. The thermogravimetric-differential scanning calorimetry indicates key temperature stages for organic component decomposition. In addition, a debinding and sintering strategy is implemented, effectively preventing cracking and deformation, and yielding dense, crack-free alumina ceramic parts.

Conclusions

This study fabricated an alumina ceramic precursor with a shape memory effect by the photopolymerization 4D printing technology, and systematically investigated its printing process, shape memory performance, and sintering behavior. The study demonstrated that the configured ceramic slurry had excellent shear thinning properties and rheological performance, making it suitable for high-precision stereolithography printing. The precursor printed was found to exhibit a significant shape memory function, with a shape fixation rate of approximately 97% and a shape recovery rate of approximately 98%. It could be controlled to undergo shape reconstruction and recovery through thermal stimulation. The shape recovery of the precursor structure was achieved through the Joule heating, demonstrating its potential application in fields such as aerospace intelligent hinges. Moreover, the thermal analysis results indicated that the optimized degreasing and sintering process could yield structurally complete and dense ceramic parts. This research could provide a feasible technical approach for 4D printing of ceramic materials and the design of shape memory structures, having a significant theoretical and application value.

Key words

photopolymerization / 4D printing / ceramic precursor / shape memory

引用本文

马俊鹏, 吴敬文, 刘飞腾, 魏琦, 田恩浩, 屈鹏, 王绍清, 郭帅, 李红双, 郭琳, 吴甲民, 郭安福. 具有形状记忆效应的陶瓷前驱体光固化4D打印与性能调控. 硅酸盐学报, 2026 , 54 (9) : 2950 -2960 . DOI: 10.14062/j.issn.0454-5648.20260084

Junpeng MA, Jingwen WU, Feiteng LIU, Qi WEI, Enhao TIAN, Peng QU, Shaoqing WANG, Shuai GUO, Hongshuang LI, Lin GUO, Jiamin WU, Anfu GUO. Photopolymerization-Based 4D Printing of Ceramic Precursors with Shape Memory and Tunable Performance[J]. Journal of the Chinese Ceramic Society, 2026 , 54 (9) : 2950 -2960 . DOI: 10.14062/j.issn.0454-5648.20260084

基金

收起

山东省自然科学基金(ZR2023ME154)
国家自然科学基金(52405371)

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

2026年第54卷第9期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.14062/j.issn.0454-5648.20260084

接收时间：2026-02-06
首发时间：2026-10-22
出版时间：2026-08-18

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2026-02-06
修回日期：2026-03-30

基金

山东省自然科学基金(ZR2023ME154)

国家自然科学基金(52405371)

作者信息

^1．聊城大学机械与汽车工程学院，山东聊城 252000

^2．聊城大学材料科学与工程学院，山东聊城 252000

^3．华中科技大学材料科学与工程学院，材料成形与模具技术全国重点实验室，武汉 430074

通讯作者:

郭安福（1978—），男，博士，教授。

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/gsyxb/CN/10.14062/j.issn.0454-5648.20260084

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT