硅酸盐学报

多功能镍/锌/氮掺杂多孔碳@还原氧化石墨烯纳米复合材料制备及其防腐吸波性能

PDF下载

李莹 ¹^,² , 刘佳鑫 ¹ , 王思佳 ¹ , 董春雷 ¹ , 陈志纯 ³^,⁴ , 张鹏 ¹^,² , 雷东移 ¹^,² , 王文佳 ¹ , 耿国颖 ¹ , 王柯心 ¹

硅酸盐学报 | 研究论文 2024,52(6): 2040-2056

收起

硅酸盐学报 |研究论文 2024 , 52 (6) : 2040 -2056

多功能镍/锌/氮掺杂多孔碳@还原氧化石墨烯纳米复合材料制备及其防腐吸波性能

全屏

李莹¹^,², 刘佳鑫¹, 王思佳¹, 董春雷¹, 陈志纯³^,⁴, 张鹏¹^,², 雷东移¹^,², 王文佳¹, 耿国颖¹, 王柯心¹

作者信息

^1．青岛理工大学土木工程学院，山东青岛 266520

^2．海洋环境混凝土技术教育部工程研究中心，山东青岛 266520

^3．建筑材料工业技术监督研究中心，北京 100024

^4．东南大学材料科学与工程学院，南京 211189

通讯作者:

张鹏（1981—），男，博士，教授；

雷东移（1986—），男，博士，副教授。

作者简介:

李莹（1988—），女，博士，副教授。

Preparation of Multifunctional Ni/Zn/NC@rGO Nanocomposites and Study on Their Anticorrosive and Electromagnetic Wave Absorption Performance

Ying LI¹^,², Jiaxin LIU¹, Sijia WANG¹, Chunlei DONG¹, Zhichun CHEN³^,⁴, Peng ZHANG¹^,², Dongyi LEI¹^,², Wenjia WANG¹, Guoying GENG¹, Kexin WANG¹

Affiliations

^1.Department of Civil Engineering, Qingdao University of Technology, Qingdao 266520, Shandong, China

^2.Engineering Research Center of Concrete Technology under Marine Environment, Ministry of Education, Qingdao 266520, Shandong, China

^3.Technical Supervision and Research Center of the Building Materials Industry, Beijing 100024, China

^4.School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China

Corresponding Author:

ZHANG Peng (1981-), male, Ph.D., Professor; E-mail: peng.zhang@qut.edu.cn;

LEI Dongyi (1986-), male, Ph.D., Associate Professor. leidongyi@qut.edu.cn

LI Ying (1988-), female, Ph.D., Associate Professor. E-mail: liying@qut.edu.cn

出版时间: 2024-06-20 doi: 10.14062/j.issn.0454-5648.20230708

文章导航

摘要

收起

优异的吸波材料不仅要满足高效的电磁波衰减特性，还要适应现代日益复杂的服役环境。本工作采用简单的沉淀和热解工艺将镍纳米颗粒（Ni NPs）均匀分散于还原氧化石墨烯（rGO）片层上，制备得到磁电协同的镍/锌/氮掺杂多孔碳@还原氧化石墨烯（Ni/Zn/NC@rGO）纳米复合材料。利用磁性纳米粒子与介电型rGO二维片层结构的协同优势，构建了完整的导电网络，优化了纳米复合材料的阻抗匹配与电磁衰减特性。同时，复合材料间多重界面提供的界面极化增强了入射波的多重反射和散射，有效提升了吸波性能。结果表明，Ni/Zn/NC@rGO-1∶1纳米复合材料在匹配厚度1.67 mm时的最低反射损耗值（RL_min）为-63.70 dB，而当匹配厚度为1.63 mm时，最大有效吸收带宽（RL<-10 dB）达到5.36 GHz。此外，复合材料的片层结构有效延长了腐蚀介质的扩散路径，掺杂Ni/Zn/NC@rGO纳米复合材料涂层的腐蚀电流密度I_corr达到1.437×10^-11 A/cm²，防腐性能明显优于其他涂层样品，这项工作为制备高效防腐电磁吸波多功能材料提供了新思路。

关键词

电磁吸波 / 石墨烯 / 金属有机框架 / 磁电协同 / 防腐

Abstract

收起

Introduction

The rapid development of radar and radio communication technology plays a critical role in enhancing the competitiveness of national defense, while subsequent electromagnetic interference seriously threatens the stealth and information security of military equipment. Consequently, electromagnetic wave absorption (EWA) materials that can eliminate or reduce electromagnetic waves by converting electromagnetic energy into thermal energy or other energy through their own electromagnetic loss mechanism have attracted much attention. Nevertheless, the development of EWA materials is still a challenge to simultaneously satisfy efficient microwave absorption and excellent anticorrosive performance in the case of the complex and changeable marine military environment. Reduced graphene oxide (rGO) with a unique sheet structure, a great chemical stability and a high electrical conductivity can extend the diffusion path of corrosive media and provide conductive loss, which is an excellent candidate for anticorrosion and wave absorption material. To improve the environmental adaptability of EWA materials for practical applications, constructing nanocomposites via combining rGO and MOFs derivatives is an effective strategy to achieve significant EWA and anticorrosion properties. In this paper, metal nanoparticle uniformly loaded carbon skeleton-rGO composites were prepared with MOFs as precursors to improve the impedance matching and EWA performance via utilizing the synergistic effect of magnetic nanoparticles and dielectric rGO. In addition, a theoretical and experimental reference for the development of new multifunctional materials with a high-efficiency electromagnetic wave absorption and an anticorrosion performance was also provided.

Methods

For the preparation of Ni/Zn/NC@rGO nanocomposites, graphene oxide (GO) was prepared by a modified Hummer method. Also, white ZIF-8 precursor powder was obtained via dissolving zinc nitrate in 2-methylimidazole solution in methanol system. Meanwhile, nickel nitrate was dissolved into ZIF-8 precursor powder, and GO with different mass ratios of nickel nitrate was added. Finally, the obtained powder was treated at a high temperature to obtain Ni/Zn/NC@rGO nanocomposites. The composition of Ni/Zn/NC@rGO nanocomposites was determined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The magnetic properties of the composites were measured via hysteresis curves. The microstructures of the nanocomposites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electromagnetic parameters of Ni/Zn/NC@rGO nanocomposites were examined by a vector network analyzer. The dynamic potential polarization of bare carbon steel, carbon steel coated with pure epoxy resin coating, carbon steel coated with 3% (in mass fraction) doped Ni/Zn/NC epoxy resin (Ni/Zn/NC/EP), and carbon steel coated with 3% doped Ni/Zn/NC@rGO epoxy resin (Ni/Zn/NC@rGO/EP) were analyzed by an electrochemical workstation for three times to ensure the accuracy of the results.

Results and discussion

The XRD patterns of Ni/Zn/NC and Ni/Zn/NC@rGO nanocomposites show a crystalline facet C(002) of rGO as well as crystalline facets (111), (200) and (220) of Ni metal, indicating that Ni²⁺ is reduced to magnetic Ni monomers at a high temperature. The XPS spectra show that the Ni/Zn/NC@rGO nanocomposites consist of elements C, N, Ni, O and Zn. Ni/Zn/NC@rGO-1∶1 nanocomposite has the maximum degree of graphitization and more structural integrity, possibly due to the promotion of wave absorption and anticorrosion properties. Besides, the SEM and TEM images of Ni/Zn/NC@rGO nanocomposites reveal that the nanocomposites have a large number of pore structures, which allow electromagnetic waves to be dissipated through multiple reflection and scattering. Furthermore, Ni nanoparticles are uniformly dispersed on rGO nanosheets, and the multiple interfaces formed lead to the polarization relaxation phenomenon, which is beneficial for the attenuation of electromagnetic waves through polarization loss.

Ni/Zn/NC@rGO-1∶1 nanocomposite has the maximum electromagnetic wave storage and attenuation capabilities, which can be attributed to that the interface polarization induced by the rGO multilayer structure and the uniformly dispersed Ni nanoparticles and the rGO sheets, as well as the dipole polarization originated from the defects created by N atoms doping during the pyrolysis process. Moreover, the imaginary part of the complex permittivity of Ni/Zn/NC@rGO-1∶1 shows slight fluctuations, indicating that the existence of multiple polarization relaxation processes, which is also confirmed by the Cole-Cole semicircle plots. As a result, Ni/Zn/NC@rGO-1∶1 exhibits the optimum EMA performance. The minimum reflection loss value (RL_min) is -63.70 dB with a matching thickness of 1.67 mm, and the effective absorption bandwidth (RL<-10 dB) reaches 5.36 GHz at the thickness of 1.63 mm. The synergistic benefits of magnetic nanoparticles and dielectric rGO optimize the impedance matching characteristics of Ni/Zn/NC@rGO-1∶1 sample, while the porous structure and abundant interface polarization effectively improve the attenuation constant of the sample.

Compared with carbon steel of other coating samples, Ni/Zn/NC@rGO/EP coating sample possesses a higher corrosion potential and a lower corrosion current, thus showing the most excellent anticorrosion performance. Ni/Zn/NC@rGO nanoparticles fill the micropores of the epoxy resin, which can effectively inhibit the infiltration of corrosive ions. In addition, the unique sheet structure of graphene is also easy to stack and thereby extend the diffusion pathway of corrosive media to achieve the purpose of improving the anticorrosion performance.

Conclusions

Ni/Zn/NC@rGO nanocomposites derived from MOF were synthetized via co-precipitation and pyrolysis processes., The outstanding impedance matching and microwave attenuation ability was realized via adjusting the mass ratios between the Ni source and GO. At a mass ratio of 1∶1, the effective absorption bandwidth and the RL_min values were 5.36 GHz and -63.70 dB with the thicknesses of 1.63 mm and 1.67 mm, respectively, which could be attributed to that the porous structure provide transmission paths for multiple reflections and scattering of electromagnetic waves, as well as multiple interfaces bring more polarization loss. In particular, the graphene layer structure also extended the diffusion path of the corrosive medium, resulting in a higher corrosion potential and a lower corrosion current in Ni/Zn/NC@rGO-doped nanocomposite coatings. This study provides a reference for the development of efficient anticorrosion and EWA materials, which could have a promising application in the field of marine environment.

Key words

electromagnetic wave absorption / graphene / metal-organic framework / magnetic-electric synergy / anticorrosion

引用本文

李莹, 刘佳鑫, 王思佳, 董春雷, 陈志纯, 张鹏, 雷东移, 王文佳, 耿国颖, 王柯心. 多功能镍/锌/氮掺杂多孔碳@还原氧化石墨烯纳米复合材料制备及其防腐吸波性能. 硅酸盐学报, 2024 , 52 (6) : 2040 -2056 . DOI: 10.14062/j.issn.0454-5648.20230708

Ying LI, Jiaxin LIU, Sijia WANG, Chunlei DONG, Zhichun CHEN, Peng ZHANG, Dongyi LEI, Wenjia WANG, Guoying GENG, Kexin WANG. Preparation of Multifunctional Ni/Zn/NC@rGO Nanocomposites and Study on Their Anticorrosive and Electromagnetic Wave Absorption Performance[J]. Journal of the Chinese Ceramic Society, 2024 , 52 (6) : 2040 -2056 . DOI: 10.14062/j.issn.0454-5648.20230708

基金

收起

青创科技支持计划(2021KJ045)
国家自然科学基金联合基金(U22A20244; U23A20673)
国家自然科学基金(52002201)
海洋环境混凝土技术教育部工程中心开放课题(TMduracon2022007)

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

2024年第52卷第6期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.14062/j.issn.0454-5648.20230708

接收时间：2023-09-12
首发时间：2026-10-22
出版时间：2024-06-20

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2023-09-12
修回日期：2023-10-14

基金

青创科技支持计划(2021KJ045)

国家自然科学基金联合基金(U22A20244; U23A20673)

国家自然科学基金(52002201)

海洋环境混凝土技术教育部工程中心开放课题(TMduracon2022007)

作者信息

^1．青岛理工大学土木工程学院，山东青岛 266520

^2．海洋环境混凝土技术教育部工程研究中心，山东青岛 266520

^3．建筑材料工业技术监督研究中心，北京 100024

^4．东南大学材料科学与工程学院，南京 211189

通讯作者:

张鹏（1981—），男，博士，教授；

雷东移（1986—），男，博士，副教授。

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/gsyxb/CN/10.14062/j.issn.0454-5648.20230708

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT