硅酸盐学报

SiC_f/SiC复合材料基体改性抗氧化腐蚀研究进展

PDF下载

刘永胜 ¹^,² , 任洁 ¹ , 李昀臻 ¹ , 李精鑫 ¹^,² , 曹晔洁 ¹^,²

硅酸盐学报 | 第15届无机非金属材料专题研讨会专题(一)——综合评述 2026,54(4): 1257-1273

收起

硅酸盐学报 | 第15届无机非金属材料专题研讨会专题(一)——综合评述 2026, 54(4): 1257-1273

SiC_f/SiC复合材料基体改性抗氧化腐蚀研究进展

全屏

刘永胜¹^,², 任洁¹, 李昀臻¹, 李精鑫¹^,², 曹晔洁¹^,²

作者信息

^1．西北工业大学超高温结构复合材料重点实验室，西安 710072

^2．西北工业大学宁波研究院，浙江宁波 315399

刘永胜（1975—），男，博士，教授。

LIU Yongsheng (1975-), male, Ph.D., Professor. E-mail: yongshengliu@nwpu.edu.cn

Research Progress on Matrix Modification of SiCf/SiC Composites for Oxidation and Corrosion Resistance

Yongsheng LIU¹^,², Jie REN¹, Yunzhen LI¹, Jingxin LI¹^,², Yejie CAO¹^,²

Affiliations

^1.Science and Technology on Thermostructural Composites Materials Laboratory, Northwestern Polytechnical University, Xi'an 710072, China

^2.Ningbo Institute of Northwestern Polytechnical University, Ningbo 315399, Zhejiang, China

出版时间: 2026-01-30 doi: 10.14062/j.issn.0454-5648.20250721

文章导航

摘要

收起

连续碳化硅纤维增强碳化硅陶瓷基复合材料（简称SiC_f/SiC复合材料）由于其优异高温性能已成为高推重比航空发动机首选高温轻质热结构材料，但其高温抗氧化腐蚀性能较差限制了长寿命使用。本文综述了SiC_f/SiC复合材料中引入自愈合组元、网络中间体氧化物以及稀土硅酸盐组元等进行基体改性的研究进展，系统分析了不同改性组元提升其抗氧化腐蚀性能的改性机理与改性工艺，对存在问题及未来发展方向进行了展望。

关键词

碳化硅纤维增强碳化硅复合材料 / 基体改性 / 抗氧化腐蚀 / 腐蚀机理

Abstract

收起

Continuous silicon carbide fiber reinforced silicon carbide ceramic matrix composites (referred to as SiC_f/SiC composites) become the preferred high-temperature and lightweight thermal structure materials for high thrust-to-weight ratio aero engines due to their excellent high-temperature properties. However, their poor high-temperature oxidation and corrosion properties limit their long-life use. It is effective to improve the oxidation and corrosion properties of SiC_f/SiC composite matrix through matrix modification, and the commonly used modified materials mainly include self-healing components, network intermediate oxides and rare-earth silicates.

The self-healing components form the liquid phase of B₂O₃ or borosilicate glass phase in the process of oxidative corrosion that has a certain fluidity and viscosity at a high temperature, which can fill the cracks and holes in the matrix. The volume expansion caused by oxidation makes the small defects heal when the oxidizing medium diffuses in the cracks as the oxidation phase, which can effectively block the diffusion of the oxidizing medium to the key areas that are easy to oxidize such as fibers and interfaces, thus enhancing the oxidation resistance of the material and extending its service life. The network intermediate oxide can absorb the "free oxygen" in the borosilicate glass melt and change its coordination from [MO₆] to [MO₄], reconstructing the silicate network damaged by water vapor erosion and maintain its integrity, and significantly improving the stability of the self-healing glass phase under high temperature water vapor conditions and the oxidation and corrosion properties of composites. Rare-earth silicate itself has excellent antioxidant corrosion properties, and the rare-earth elements migrate to the near surface of the matrix to form an antioxidant layer during the oxidative corrosion process, which inhibits the penetration of oxidative corrosion medium into the matrix and the reaction between borosilicate glass and water vapor, reduces the generation of gaseous substances, and slows down the oxidative corrosion of the matrix to a certain extent.

There are two main ways to introduce modified materials into the matrix, i.e., one refers to the direct introduction of antioxidant corrosive materials without changing their phases during use, such as directly introducing rare-earth silicates into the matrix, and another refers to the introduction of the precursor of the modified material or substances containing modified elements into the matrix, and the target modified material is obtained through chemical reactions during the oxidative corrosion process, usually in this way the introduction of self-healing components and oxidation corrosion phases into the matrix. In addition, the synthesis process of modified materials mostly adopts CVI, PIP, RMI, SI, etc., and their advantages and disadvantages of different modification processes are different. For instance, the preparation temperature of CVI process is low, but the densification cycle is long and the cost is high. The RMI process is simple, the cycle is short, and the composite material with a high density is prepared, but the melting temperature is high, which is easy to heat damage to the fiber and interface. Besides a single process, composite processes are mostly used to achieve complementary advantages, introducing modified materials into the matrix and realizing the densification of composite materials.

Summary and Prospects

It is effective to introduce self-healing components, network intermediate oxides and rare-earth silicates into the SiC_f/SiC composite matrix to fill the pores and cracks of the material via generating self-healing components during the oxidative corrosion process, and forming a dense oxide layer on the surface of the material to resist further erosion by the oxidizing medium, thus improving the water and oxygen corrosion resistance of the composites. However, there are still some challenges. Firstly, the research on the oxidation corrosion mechanism of composite materials is still in-depth, and there is a lack of data on oxidation kinetics, oxidative corrosion rate and oxidative corrosion depth, and the basic research on the damage evolution mechanism of materials in different environments is still relatively weak. It is thus necessary to construct a complete and reliable performance database of SiC_f/SiC composites modified with different substrates, clarify the oxidative corrosion damage mechanism, and provide design parameters and theoretical support for the practical application of composites. Secondly, the effective temperature range of a single modified substance to improve the oxidative corrosion performance of composites is limited. The temperature range of B group is below

1000 ℃, and the temperature range of Al group is 1000-1300 ℃. The synergistic effect of multiple modification strategies is explored via introducing multiple modified substances into the matrix of composites at the same time. It is expected to achieve the oxidation and corrosion properties of SiC_f/SiC composites in a wide temperature range and achieve a long-life cycle protection. Finally, it is also worth to develop new preparation processes, such as nano-infiltration and transient eutectic (NITE), or use hybrid processes to achieve material densification and improve the performance of SiCf/SiC composite substrates while modifying them.

Key words

silicon carbide fiber reinforced silicon carbide composites / matrix modification / oxidation and corrosion resistance / corrosion mechanism

引用本文

刘永胜, 任洁, 李昀臻, 李精鑫, 曹晔洁. SiC_f/SiC复合材料基体改性抗氧化腐蚀研究进展. 硅酸盐学报, 2026 , 54 (4) : 1257 -1273 . DOI: 10.14062/j.issn.0454-5648.20250721

Yongsheng LIU, Jie REN, Yunzhen LI, Jingxin LI, Yejie CAO. Research Progress on Matrix Modification of SiCf/SiC Composites for Oxidation and Corrosion Resistance[J]. Journal of the Chinese Ceramic Society, 2026 , 54 (4) : 1257 -1273 . DOI: 10.14062/j.issn.0454-5648.20250721

基金

收起

陕西省重点研发计划(2025CY-GJHX-15)
国家重点研发计划(2023YFB4606100)
科创甬江2035国际科技合作项目(2024H018)
科创甬江2035重点研发项目(2025Z071)

参考文献

收起

2026年第54卷第4期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.14062/j.issn.0454-5648.20250721

接收时间：2025-09-30
首发时间：2026-05-20
出版时间：2026-01-30

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2025-09-30
修回日期：2025-11-02

基金

陕西省重点研发计划(2025CY-GJHX-15)

国家重点研发计划(2023YFB4606100)

科创甬江2035国际科技合作项目(2024H018)

科创甬江2035重点研发项目(2025Z071)

作者信息

^1．西北工业大学超高温结构复合材料重点实验室，西安 710072

^2．西北工业大学宁波研究院，浙江宁波 315399

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/gsyxb/CN/10.14062/j.issn.0454-5648.20250721

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT