硅酸盐学报

埃洛石表面锚定四苯乙烯构建铜离子响应型纳米复合材料

PDF下载

马艳芳 ¹ , 贾鹏英 ² , 卢业龙 ² , 张博 ² , 武永刚 ² , 张海磊 ²

硅酸盐学报 | 非金属矿清洁高效利用专题—研究论文 2025,53(12): 3545-3552

收起

硅酸盐学报 |非金属矿清洁高效利用专题—研究论文 2025 , 53 (12) : 3545 -3552

埃洛石表面锚定四苯乙烯构建铜离子响应型纳米复合材料

全屏

马艳芳¹, 贾鹏英², 卢业龙², 张博², 武永刚², 张海磊²

作者信息

^1．石家庄铁路职业技术学院，石家庄 050000

^2．河北大学化学与材料科学学院，河北保定 071002

通讯作者:

张海磊（1988—），男，博士，副教授。

作者简介:

马艳芳（1982—），女，硕士，副教授。

Tetraphenylethylene-Modified Halloysite Nanotubes Enabling Cu(II)-Sensitive Nanocomposite

Yanfang MA¹, Pengying JIA², Yelong LU², Bo ZHANG², Yonggang WU², Hailei ZHANG²

Affiliations

^1.Shijiazhuang Institute of Railway Technology, Shijiazhuang, 050000, China

^2.College of Chemistry and Environmental Science, Hebei University, Baoding, 071002, Hebei, China

Corresponding Author:

ZHANG Hailei (1988-), male, Ph.D., Associate Professor. E-mail: zhanghailei@hbu.edu.cn

MA Yanfang (1982-), female, M.D., Associate Professor. E-mail: 21172347@qq.com

出版时间: 2025-12-20 doi: 10.14062/j.issn.0454-5648.20250167

文章导航

摘要

收起

埃洛石纳米管（HNTs）是一种具有管状结构的天然纳米材料，具有水分散性良好、成本低廉、低毒性、易于实现表面改性等优点。本工作以HNTs为基材，通过表面改性将四苯乙烯和香豆素基团引入其表面结构中，制备具有Cu（II）离子响应性能的纳米复合材料（HNTs-TPE-Cou）。红外光谱、X射线光电子能谱、固体核磁、热重分析和透射电镜等测试表明产物结构与预期相符。HNTs-TPE-Cou水分散液在365 nm紫外光激发下，于560 nm处出现荧光发射峰。Cu（II）离子与HNTs-TPE-Cou的螯合作用导致水分散液荧光迅速淬灭，以此实现了水中Cu（II）离子的快速检测，且显示出良好的特异性、精确性和重复性。通过进一步将HNTs-TPE-Cou与多孔材料复合，制备凝胶状分离柱，并将其成功应用于水中Cu（II）离子的同步检测分离。上述埃洛石纳米管改性产物为水中重金属离子的同步检测分离提供了一种有益尝试。

关键词

埃洛石纳米管 / 表面改性 / 铜离子 / 四苯乙烯

Abstract

收起

Introduction

The increasing risk of heavy metals causes many concerns as one of the nonnegligible problems in modern environmental conservation. As one of the most common heavy metals, copper (II) has a dominant effect in such a pollution. The accumulation of copper (II) in water can eventually give rise to the overexpression of copper in humans, showing to be directly associated with Alzheimer's, Parkinson's, Menkes, and Wilson's disease. As a result, the residue of copper (II) in wastewater becomes a ubiquitous environmental challenge. The development of smart materials that are capable of detecting and removing copper (II) simultaneously can pave an effective approach to solving this puzzling issue. Halloysite nanotubes (HNTs) are natural hollow aluminosilicate clays with a chemical composition similar to kaolin (i.e., Al₂Si₂O₅(OH)₄·nH₂O). HNTs display a superior water dispersibility due to the large cavity volume and surface charge repulsion. The attractive properties including low-cost, environmental friendliness, biocompatibility, good stability, and ease of surface modification also make HNTs promising composite materials in the fields of environmental protection, catalysts, bio-medical materials, and sensors.. In this study, tetraphenylethene (TPE) moiety was immobilized on aminated HNTs with oxalyl chloride for the preparation of TPE-functionalized HNTs (HNTs-TPE-NH₂).

Methods

TPE-2NH₂ (184 mg, 0.5 mmol), HNTs-COCl, mL and and 10 N,N-Dimethylformamide (DMF) were mixed in a flask. The system was stirred at room temperature to make nanoparticles well-dispersed and then reacted at 60 ℃ for 8 h. After cooling to ambient temperature, the suspension was centrifugated and the obtained residue was washed by DMF, tetrahydrofuran (THF), and ethanol.

The coumarin unit was bonded to the HNTs-TPE-NH₂ via a condensation reaction by treating 7-hydroxy-2-oxo-2H-chromene-5-carbaldehyde with HNTs-TPE-NH₂ to afford the Schiff base-containing product (HNTs-TPE-Cou). HNTs-TPE-NH₂ (1.0 g) and compound M1 (50 mg, 0.25 mmol) were added to a flask containing absolute ethanol (15 mL), and vacuum-filled with argon gas was repeated for three times. The mixture was refluxed and stirred at 70 ℃ for 12 h. After cooling to ambient temperature, the suspension was centrifugated and the obtained residue was washed sequentially by THF and ethanol. After vacuum-drying, the product HNTs-TPE-Cou was obtained as a faint yellow solid. The obtained HNTs-TPE-Cou was then deposited on the surface of polyurethane foam (PUF) to afford the composite PUF@HNTs-TPE-Cou based on the surface charge of the nanotubes. The obtained product HNTs-TPE-Cou was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, solid-state nuclear magnetic resonance spectroscopy, thermogravimetric analysis, transmission electron microscopy, respectively.

Results and discussion

HNTs-TPE-Cou aqueous solution has a fluorescence emission peak at a wavelength of 560 nm. The chelation between Cu²⁺ and HNTs-TPE-Cou can destroy the aggregation state of TPE units and give rise to a "turn off" effect on the fluorescence intensity of HNTs-TPE-Cou aqueous solution. he maximum fluorescence intensity of HNTs-TPE-Cou appears as the Cu²⁺ ion concentration is 0 μmol/L. The fluorescence intensity of HNTs-TPE-Cou decreases gradually with the increase of Cu²⁺ ion concentration, showing a typical concentration-dependent manner. F₀ and F represent the fluorescent intensities at 560 nm without and with different concentrations of Cu²⁺ ion, respectively. The F₀/F of HNTs-TPE-Cou at 560 nm has a good linear correlation to the concentration of Cu²⁺ ion when the Cu²⁺ ion concentration in the solution to be measured is between 0.2 μmol/L and 0.6 μmol/L. Other metal ions, including Ni²⁺, Mg²⁺, Ca²⁺, Co²⁺, Mn²⁺, Al³⁺, Ba²⁺, Na⁺, K⁺, Zn²⁺, and Cd²⁺, do not exhibit the quenching phenomenon with the addition to HNTs-TPE-Cou aqueous solution.

The yielded PUF@HNTs-TPE-Cou composites are cut into special shapes to fill the glass columns. A Gel-like separation column is prepared, which can be used to retain Cu²⁺ ions selectively. Moreover, the fluorescence intensity can serve as a nake-eyes identified indicator, which is useful to display the degree of usage. When the fluorescence intensity changes to non-emission, it means the end of useful life, and new columns are needed. The column (20 cm × 2 cm) is used to purify the Cu²⁺-containing water ([Cu²⁺] = 1×10^-4 mol/L). The concentration of Cu²⁺ effluent water is detected. The results indicate the concentration of Cu²⁺ is lower than LOD calculated in the first 100 mL eluting water, having a high purification efficiency.

Conclusions

In this study, HNTs were used as scaffolds and surface modified with tetraphenylethylene and coumarin moieties. The obtained product HNTs-TPE-Cou could be used to detect and separate of Cu²⁺ ions in water solution. HNTs-TPE-Cou displayed an intense fluorescence emission peak at a wavelength of 560 nm in water under the excitation of 365 nm light, while a repaid "turn off" effect on fluorescence appeared, showing a chelation behavior after the addition of Cu²⁺ ions. The as-prepared HNTs-TPE-Cou had high specificity and precision in detecting and removing Cu²⁺ without the recourse to energy consumption. Furthermore, HNTs-TPE-Cou was developed as composite materials by a facile deposition method, which could be further used as gel-like separation columns. The established method could pave a path on the simultaneously detecting and removing metal ions in aqueous solution.

Key words

halloysite nanotube / surface modification / copper (II) / tetraphenylethylene

引用本文

马艳芳, 贾鹏英, 卢业龙, 张博, 武永刚, 张海磊. 埃洛石表面锚定四苯乙烯构建铜离子响应型纳米复合材料. 硅酸盐学报, 2025 , 53 (12) : 3545 -3552 . DOI: 10.14062/j.issn.0454-5648.20250167

Yanfang MA, Pengying JIA, Yelong LU, Bo ZHANG, Yonggang WU, Hailei ZHANG. Tetraphenylethylene-Modified Halloysite Nanotubes Enabling Cu(II)-Sensitive Nanocomposite[J]. Journal of the Chinese Ceramic Society, 2025 , 53 (12) : 3545 -3552 . DOI: 10.14062/j.issn.0454-5648.20250167

基金

收起

中央引导地方科技发展资金项目(226Z1301G)
河北省高等学校科学研究项目(JCZX2025011)

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

2025年第53卷第12期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.14062/j.issn.0454-5648.20250167

接收时间：2025-03-12
首发时间：2026-10-21
出版时间：2025-12-20

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2025-03-12
修回日期：2025-03-20

基金

中央引导地方科技发展资金项目(226Z1301G)

河北省高等学校科学研究项目(JCZX2025011)

作者信息

^1．石家庄铁路职业技术学院，石家庄 050000

^2．河北大学化学与材料科学学院，河北保定 071002

通讯作者:

张海磊（1988—），男，博士，副教授。

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/gsyxb/CN/10.14062/j.issn.0454-5648.20250167

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT