硅酸盐学报

透明装甲防护材料及其结构设计与应用评价

PDF下载

邵岑 ¹^,² , 张乐 ¹^,² , 王思晴 ¹ , 王彤 ² , 邱凡 ² , 马庆飞 ¹ , 陈浩 ¹^,²

硅酸盐学报 | 综合评述 2024,52(3): 1043-1064

收起

硅酸盐学报 |综合评述 2024 , 52 (3) : 1043 -1064

透明装甲防护材料及其结构设计与应用评价

全屏

邵岑¹^,², 张乐¹^,², 王思晴¹, 王彤², 邱凡², 马庆飞¹, 陈浩¹^,²

作者信息

^1．江苏师范大学物理与电子工程学院，江苏省先进激光材料与器件重点实验室，江苏徐州 221116

^2．江苏锡沂高新材料产业技术研究院，江苏徐州 221400

通讯作者:

张乐（1988—），男，博士，教授；

陈浩（1976—），男，博士，教授。

作者简介:

邵岑（1993—），男，硕士。

Transparent Armor Protective Materials : Structural Design and Application Performance Evaluation

Cen SHAO¹^,², Le ZHANG¹^,², Siqing WANG¹, Tong WANG², Fan QIU², qingfei MA¹, Hao CHEN¹^,²

Affiliations

^1.School of Physics Electronic Engineering, Jiangsu Normal University, Jiangsu Key Laboratory of Advanced Laser Materials and Devices, Xuzhou 221116, Jiangsu, China

^2.Jiangsu Xiyi Advanced Materials Research Institute of Industrial Technology, Xuzhou 221400, Jiangsu, China

Corresponding Author:

ZHANG Le (1988-), male, Ph.D., Professor; E-mail: zhangle@jsnu.edu.cn;

CHEN Hao (1976-), male, Ph.D., Professor. chenhao@jsnu.edu.cn

SHAO Cen (1993-), male, Master. E-mail: shcy-h@foxmail.com

出版时间: 2024-03-20 doi: 10.14062/j.issn.0454-5648.20230719

文章导航

摘要

收起

透明装甲是应对未来战争的“光学盾牌”，其具有高光学透明度、高硬度、高强度、可防弹道冲击与爆炸物碎片冲击等特性，被广泛应用于装甲战车、武装直升机、舰船航母等装备平台。目前，世界各军事强国竞相开发出抗弹性能优异的透明装甲，但是，透明装甲的防护性能提升与轻量化设计仍面临瓶颈。本文首先对现役透明防护材料的性质进行了详细介绍；重点分析了透明防护装甲的结构设计方案及其损伤机制，并指出了防护性能提升的重点方向；再者介绍了国内外透明防护材料性能考核的评价方法，特别是需要重点考核的项目；最后，对透明装甲的发展方向进行了展望，为新一代透明装甲的结构设计与应用评价提供借鉴。

关键词

透明装甲 / 防护性能 / 轻量化 / 结构设计 / 应用评价

Abstract

收起

As the "optical shield" for the future warfare, transparent armors exhibit high optical transparency, high hardness, high strength, and resistance to ballistic and explosive debris impacts. They are widely used on the equipment platforms such as armored vehicles, armed helicopters, and ship carriers. At present, the transparent armor with a superior elastic resistance is developed. However, the improvement of armor protection performance and lightweight armor design becomes a challenge, and it is manifested in the difficulty of balancing its protection performance and optical properties. Based on the research status and existing problems of transparent armor in the field of protective materials, this review represented the following aspects:

1) The current development status of transparent protective materials are reviewed. It is important to introduce the physical and chemical properties, mechanism of action, and industrial status of hard protective materials and soft energy absorbing materials for in-service armor. The research status indicates that sapphire single crystal is the most suitable material for mass production of new armored projectile surface, and its mechanical properties and industrial advantages do not possess, compared to other hard and transparent protective materials such as float glass, AlON and MgAl₂O₄ ceramics. However, the cleavage fracture of sapphire single crystals restricts its application potential in transparent protection. Polyurethane adhesive can achieve the high-strength bonding of inorganic and organic materials in the armor fields, but its poor environmental weather resistance affects the service life of transparent armor. Polycarbonate board is an ideal soft energy absorbing material with superior optical properties, impact resistance, and creep resistance. However, it is prone to moisture absorption and fogging, affecting the observation field of transparent armor.

2) The structural design strategy and the analysis of failure behavior are explored in transparent armor. A comparison is made between the design principles, performance differences, and failure mechanisms of conventional laminated glass structure (or similar-laminated glass structure) armors and the new structural armors with three functional layers. At present, the core of structure design is the synergistic matching of hard protective materials and soft energy-absorbing materials in optical properties and protective performance in the new structural transparent armor. The comparison results of different structural armors indicate that the weight of new structural armor is reduced by more than 30%, compared with that of conventional glass transparent armor under the same protection level. The conventional armor has a large damage surface with the first layer and the second layer being crushed and cracked, after being impacted by the projectile, resulting in the loss of its observation and combat capabilities. The damage surface of new structural armor shows granular crushing around the impact point, leading to the local area of the armor losing its observation and combat capabilities. The main causes of failure are the interface delamination cracking and projectile penetration damage in the optical application field of transparent armor.

3) The evaluation methods of transparent armor are summarized. The comparison results of key evaluation items of transparent armor procurement indicate that European and American countries focus on the optical properties of armor, while China pays more attention to the protective performance of armor. The United States establishs a relatively complete transparent armor procurement specification, and incorporates the optical properties of armor such as transmittance, haze, and light distortion into the procurement standards. For special night vision application scenarios, the U.S. military focuses on the optical properties of transparent armor rather than protective performance. However, there is no scientific and effective normative document for armor evaluation methods in China, and their test and characterization are often based on the evaluation methods of non-transparent protective materials. In addition, the existing test standards for transparent bulletproof materials do not pay attention to the balanced evaluation between the optical properties and protective performance of the armor, as well as the adaptability of transparent armor to the environment.

Summary and prospects

A key to improve the protective performance and lightweight degree of transparent armor is to achieve the breakthroughs in the performance of transparent protective materials. It is important to establish and improve the scientific testing methods and assessment evaluation system of transparent armor for achieving practical application of transparent armor. This review provides a reference for the structural design and application evaluation methods of the new generation of transparent armor, and assists the high-quality development of armor industry.

Key words

transparent armor / protective performance / lightweight / structural design / application evaluation

引用本文

邵岑, 张乐, 王思晴, 王彤, 邱凡, 马庆飞, 陈浩. 透明装甲防护材料及其结构设计与应用评价. 硅酸盐学报, 2024 , 52 (3) : 1043 -1064 . DOI: 10.14062/j.issn.0454-5648.20230719

Cen SHAO, Le ZHANG, Siqing WANG, Tong WANG, Fan QIU, qingfei MA, Hao CHEN. Transparent Armor Protective Materials : Structural Design and Application Performance Evaluation[J]. Journal of the Chinese Ceramic Society, 2024 , 52 (3) : 1043 -1064 . DOI: 10.14062/j.issn.0454-5648.20230719

基金

收起

国家重点研发计划(2021YFB3501700)
国家自然科学基金(52202135; 52302141)
江苏省高校优势学科建设项目(PAPD)
江苏省重点研发计划(BE2023050; BE2021040)
江苏省国际科技合作项目(BZ2023007)
徐州市技术创新专项(KC23380; KC22461; KC22497)

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

2024年第52卷第3期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.14062/j.issn.0454-5648.20230719

接收时间：2023-09-15
首发时间：2026-10-22
出版时间：2024-03-20

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2023-09-15
修回日期：2023-10-23

基金

国家重点研发计划(2021YFB3501700)

国家自然科学基金(52202135; 52302141)

江苏省高校优势学科建设项目(PAPD)

江苏省重点研发计划(BE2023050; BE2021040)

江苏省国际科技合作项目(BZ2023007)

徐州市技术创新专项(KC23380; KC22461; KC22497)

作者信息

^1．江苏师范大学物理与电子工程学院，江苏省先进激光材料与器件重点实验室，江苏徐州 221116

^2．江苏锡沂高新材料产业技术研究院，江苏徐州 221400

通讯作者:

张乐（1988—），男，博士，教授；

陈浩（1976—），男，博士，教授。

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/gsyxb/CN/10.14062/j.issn.0454-5648.20230719

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT