电源学报

一种拓扑自动重构的恒压恒流无线充电系统

PDF下载

苏君平中国电源学会会员 ¹^,² , 邱椿 ³ , 张陈涛 ³

电源学报 | 无线电能传输 2025,23(8): 226-234

收起

电源学报 |无线电能传输 2025 , 23 (8) : 226 -234

一种拓扑自动重构的恒压恒流无线充电系统

全屏

苏君平中国电源学会会员¹^,², 邱椿³, 张陈涛³

作者信息

^1.厦门城市职业学院智能制造学院，厦门　361008

^2.厦门开放大学，厦门　361008

^3.厦门大学萨本栋微米纳米科学技术研究院，厦门　361102

通讯作者:

张陈涛（1986—　），男，通信作者，博士，助理教授。研究方向：智能机器人。E-mail：zhangct@xmu.edu.cn。

作者简介:

苏君平（1984—　），男，中国电源学会会员，硕士，高级工程师。研究方向：电力电子和智能制造领域的技术研发与产品创新设计。E-mail：sujunping@xmcu.edu.cn。

邱椿（1995—　），男，硕士研究生。研究方向：智能机器人。E-mail：2601629412@qq.com。

Constant Voltage and Constant Current Wireless Charging System with Automatic Reconstruction of Topology

Junping SU Member, CPSS¹^,², Chun QIU³, Chentao ZHANG³

Affiliations

^1.School of Intelligent Manufacturing, Xiamen City University, Xiamen 361008, China

^2.Xiamen Open University, Xiamen 361008, China

^3.Pen-Tung Sah Institute of Micro-Nano Science and Technology, Xiamen University, Xiamen 361102, China

出版时间: 2025-12-30 doi: 10.13234/j.issn.2095-2805.2025.8.226

文章导航

摘要

收起

电池充电过程一般包括先恒流再恒压2个阶段。然而，现有的无线电能传输技术WPT（wireless power transfer）在从恒流到恒压的切换过程中仍面临若干挑战，包括电池状态监测、双边通信需求及多线圈间交叉耦合问题等。为解决这些问题，提出1种新颖的准CLC-LCC拓扑，该拓扑无需额外的控制方法即可实现恒流到恒压模式的平稳过渡。发射端电路采用CLC型补偿网络，使得流经发射侧线圈的电流等效为恒定电流源。二次侧电路由2个串联补偿电路并联组成，充电初期2个支路协同实现对电池的恒流充电；随着充电过程的推进，由于二极管的单向导电性，其中1个支路会被钳位断开，系统实现恒压输出。最后，搭建了1个2.6 A/105 V实验平台，验证了所提无线充电拓扑的可行性。

关键词

无线电能传输 / 恒流 / 恒压 / 拓扑设计

Abstract

收起

The battery charging process typically consists two stages, i.e., constant current (CC) followed by constant voltage (CV). However, the existing wireless power transfer (WPT) technology still encounters several challenges during the transition from the CC mode to CV mode, including battery state monitoring, requirement for bilateral communication and cross-coupling among multiple coils. To address these problems, a novel quasi-CLC-LCC topology is proposed, which can realize the smooth transition from the CC mode to CV mode without the need for additional control. A CLC compensation network is employed by the transmitter circuit, enabling the transmitting coil current to be considered as a CC source. On the secondary side, two series compensation circuits are connected in parallel, and two branches collaboratively achieve CC charging for the battery at the initial charging stage. As the charging process progresses, owing to the unidirectional conductivity of diodes, one of the branches is clamped and disconnected, enabling the WPT system to enter into CV output. Finally, an experimental platform with 2.6 A charging current and 105 V charging voltage was constructed to validate the feasibility of the proposed wireless charging topology.

Key words

Wireless power transfer (WPT) / constant current (CC) / constant voltage (CV) / topology design

引用本文

苏君平中国电源学会会员, 邱椿, 张陈涛. 一种拓扑自动重构的恒压恒流无线充电系统. 电源学报, 2025 , 23 (8) : 226 -234 . DOI: 10.13234/j.issn.2095-2805.2025.8.226

Junping SU, Chun QIU, Chentao ZHANG. Constant Voltage and Constant Current Wireless Charging System with Automatic Reconstruction of Topology[J]. Journal of Power Supply, 2025 , 23 (8) : 226 -234 . DOI: 10.13234/j.issn.2095-2805.2025.8.226

基金

收起

福建省自然科学基金资助项目(2023J01047)
厦门市自然科学基金资助项目(3502Z20227185)

参考文献

收起

文献

收起

参考文献引证文献

排序方式：

[1]

胡鹏, 王宁, 杨庆胜, 等. 具有全向抗偏移能力及恒流输出的电动汽车无线充电系统[J]. 重庆大学学报, 2024, 47(12): 92-99. Hu Peng, Wang Ning, Yang Qingsheng, et al. Wireless charging system for electric vehicles with omnidirectional anti-offset capability and constant current output[J]. Journal of Chongqing University, 2024, 47(12): 92-99. (in Chinese)

[2]

赵航, 贾静, 杨哲, 等. 平台式无人机强耦合无线电能传输方法[J]. 南方能源建设, 2025, 12(2): 158-168. Zhao Hang, Jia Jing, Yang Zhe, et al. Strongly coupled platform wireless power transmission method for UAV[J]. Southern Energy Construction, 2025, 12(2): 158-168. (in Chinese)

[3]

周晓燕, 王鹤霖, 贾海涛, 等. 一种适用于电动汽车无线充电的恒压恒流混合补偿拓扑[J]. 太阳能学报, 2024, 45(11): 343-351. Zhou Xiaoyan, Wang Helin, Jia Haitao, et al. A hybrid compensation topology with constant voltage and constant current for EV bidirectional wireless charging[J]. Acta Energiae Solaris Sinica, 2024, 45(11): 343-351. (in Chinese)

[4]

李振杰, 崔航, 袁得春, 等. 面向旋翼无人机的无线电能传输线圈自对准方法研究[J/OL]. 电源学报, 2024: 1-12. (2024-10-21) [2024-11-29]. https://link.cnki.net/urlid/12.1420.TM.20241018.1246.005. Li Zhenjie, Cui Hang, Yuan Dechun, et al. Research on self-alignment method of wireless power transmission coils for rotorcraft unmanned aerial vehicles[J/OL]. Journal of Power Supply, 2024: 1-12. (2024-10-21) [2024-11-29]. https://link.cnki.net/urlid/12.1420.TM.20241018.1246.005. (in Chinese)

[5]

赵英杰, 张闯, 刘素贞, 等. 基于电极等效电路模型的锂离子电池无析锂快充策略优化研究[J]. 电工技术学报, 2024, 39(18): 5868-5882. Zhao Yingjie, Zhang Chuang, Liu Suzhen, et al. Optimization of fast charging strategy for lithium-ion batteries without deposition based on electrode equivalent circuit model[J]. Transactions of China Electrotechnical Society, 2024, 39(18): 5868-5882. (in Chinese)

[6]

宋凯, 朱春波, 李阳, 等. 基于磁耦合谐振的自主无线充电机器人系统设计[J]. 电工技术学报, 2014, 29(9): 38-43. Song Kai, Zhu Chunbo, Li Yang, et al. Design and implementation of an autonomous wireless charging robot system using magnetically coupled resonance[J]. Transactions of China Electrotechnical Society, 2014, 29(9): 38-43. (in Chinese)

[7]

冯鸿运, 林飞, 杨中平, 等. 应用于自动导引小车无线充电系统的导航与供电一体化线圈研究[J]. 电工技术学报, 2024, 39(14): 4294-4304. Feng Hongyun, Lin Fei, Yang Zhongping, et al. A research on a navigation and power supply integrated coil for automatic guided vehicle wireless power transfer system[J]. Transactions of China Electrotechnical Society, 2024, 39(14): 4294-4304. (in Chinese)

[8]

Zhang Hailong, Chen Yafei, Kim D H, et al. Variable inductor control for misalignment tolerance and constant current/voltage charging in inductive power transfer system[J]. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2023, 11(4): 4563-4573.

[9]

黄文聪, 饶天彪, 蒋煊焱, 等. 无线电能传输系统最大效率追踪及恒压输出复合控制方法[J]. 电工技术学报, 2024, 39(12): 3589-3601. Huang Wencong, Rao Tianbiao, Jiang Xuanyan, et al. Maximum efficiency tracking and constant voltage output compound control method for wireless power transfer system[J]. Transactions of China Electrotechnical Society, 2024, 39(12): 3589-3601. (in Chinese)

[10]

黄钦鸿, 李优新, 李志忠, 等. 基于次级改进型有源整流的无线电能传输系统[J]. 电力电子技术, 2023, 57(7): 88-91. Huang Qinhong, Li Youxin, Li Zhizhong, et al. Wireless power transmission system based on improved active rectifier at receiving terminal[J]. Power Electronics, 2023, 57(7): 88-91. (in Chinese)

[11]

李乔, 李明轩, 杨斌, 等. 基于副边可变电容的IPT恒流恒压充电系统研究[J]. 中国电机工程学报, 2019, 39(19): 5741-5749, 5902. Li Qiao, Li Mingxuan, Yang Bin, et al. Secondary-side variable capacitor-based IPT system for constant current and constant voltage charging[J]. Proceedings of the CSEE, 2019, 39(19): 5741-5749, 5902. (in Chinese)

[12]

李乐, 程冰, 何良宗, 等. 基于补偿网络电流分析的恒压恒流无线充电系统[J]. 电源学报, 2022, 20(5): 101-110. Li Le, Cheng Bing, He Liangzong, et al. Constant-voltage and constant-current wireless charging system based on compensation network current analysis[J]. Journal of Power Supply, 2022, 20(5): 101-110. (in Chinese)

[13]

邹静, 徐耘英, 彭娟娟, 等. 基于频率切换实现电池恒流和恒压充电的LCC-S补偿WPT系统研究[J]. 电源学报, 2023, 21(3): 117-124. Zou Jing, Xu Yunying, Peng Juanjuan, et al. Research on LCC-S compensated WPT system based on frequency switching to realize CC and CV charging for battery[J]. Journal of Power Supply, 2023, 21(3): 117-124. (in Chinese)

[14]

Huang Zhicong, Wang Guoyu, Yu Jidong, et al. A novel clamp coil assisted IPT battery charger with inherent CC-to-CV transition capability[J]. IEEE Transactions on Power Electronics, 2021, 36(8): 8607-8611.

2025年第23卷第8期

PDF下载

引用本文

BibTeX

文章信息

doi: 10.13234/j.issn.2095-2805.2025.8.226

接收时间：2024-11-29
首发时间：2026-10-26
出版时间：2025-12-30

补充材料

相关文章

文章信息

作者

出版历史

收稿日期：2024-11-29
修回日期：2025-01-21
录用日期：2025-02-17

基金

Natural Science Foundation of Fujian Province of China(2023J01047)

福建省自然科学基金资助项目(2023J01047)

Natural Science Foundation of Xiamen City(3502Z20227185)

厦门市自然科学基金资助项目(3502Z20227185)

作者信息

^1.厦门城市职业学院智能制造学院，厦门　361008

^2.厦门开放大学，厦门　361008

^3.厦门大学萨本栋微米纳米科学技术研究院，厦门　361102

通讯作者:

张陈涛（1986—　），男，通信作者，博士，助理教授。研究方向：智能机器人。E-mail：zhangct@xmu.edu.cn。

参考文献

分享链接

https://castjournals.cast.org.cn/joweb/dyxb/CN/10.13234/j.issn.2095-2805.2025.8.226

分享至

全文二维码

扫描看全文

引用本文

BibTeX

本文的引用情况

2种不同金属材料的力学参数

科 Family	属数 Number of genus	种数 Number of species	占总种数比例 Percentage of total species (%)	属 Genus	种数 Number of species	占总种数比例 Percentage of total species (%)
鹅膏菌科Amanitaceae	2	11	5.26	鹅膏菌属 Amanita	10	4.78
小菇科 Mycenaceae	2	12	5.74	丝盖伞属 Inocybe	5	2.39
多孔菌科 Polyporaceae	8	14	6.70	蜡蘑属 Laccaria	5	2.39
红菇科 Russulaceae	3	23	11.00	小皮伞属 Marasmius	6	2.87
				小菇属 Mycena	11	5.26
				光柄菇属 Pluteus	5	2.39
				红菇属 Russula	17	8.13
				栓菌属 Trametes	5	2.39

关闭全屏

BibTeX
EndNote
RefWorks
TxT